Product Experts Available Now!
Call 1-800-940-8924
Peterson Trailer Tail Light w/ Steel Housing - Stop, Turn, Tail - Incandescent - Red Lens
(1232 reviews)
Price: $21.95
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
Peterson Trailer Tail Light w/ Steel Housing - Stop, Turn, Tail - Incandescent - Red Lens
Part Number: PM425-3
In Stock
$21.95
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (1232)
- Q & A (0)
- Photos
Peterson Trailer Lights - PM425-3
Highlights
- One Light, 3 Functions: Works as stop, tail, and turn signal so you stay visible on the road.
- Longer Bulb Life: Vibar socket absorbs road shock and vibration to protect the 1157 bulb.
- Built to Last: Steel housing with powder coat resists rust and corrosion for dependable use.
- Clean, Flush Fit: Recessed mount with built-in flange installs in a 4-1/2" diameter hole.
- Simple Power Hookup: 2-wire design grounds through the mounting stud for easy connection.
- Road Legal: DOT compliant so your trailer lighting meets safety standards.
Features to know about
Reliable Road Signaling: Combination Stop, Turn, and Tail Light
When visibility and communication on the road matter most, this 5-1/2" round incandescent trailer light gets the job done. It serves as a stop light, tail light, and turn signal all in one. The red lens over the 1157 bulb provides clear, consistent output that meets DOT compliance for safety. With a power draw of 2.2 amps at 12.8V, it’s simple, effective, and built for dependable everyday trailering.
Withstands Rough Roads: Vibar Socket for Shock Protection
Rough roads and vibration can take a toll on bulbs, but this light’s Vibar socket keeps it together. The vibration-dampening design absorbs road shock before it reaches the brass socket, helping extend bulb life. That means fewer replacements and less downtime when you’re towing over bumpy terrain or uneven surfaces.
Built to Last: Durable Steel Housing with Powder Coat Finish
This light doesn’t just look tough—it is tough. The steel housing with a powder coat finish resists rust and corrosion, so it stands up to rain, grime, and road debris. It’s made to last through years of use without losing its clean look or performance.
Clean Mounting Setup: Flush Fit with Built-In Flange
A solid fit makes installation easier and keeps your trailer looking neat. This recessed-mount light installs flush using its built-in flange and fits a 4-1/2" diameter hole. The overall diameter is 5-1/2" with a thickness of 1-5/8", and the mounting holes sit 4-1/4" apart center to center. The 2-wire design includes power leads and grounds through the mounting stud for a straightforward connection that stays secure.
Easy Maintenance and Upgrade Potential: Replaceable 1157 Bulb Design
When the time comes for maintenance or an upgrade, access is simple. The lens can be removed to reach the standard 1157 dual-filament bulb, which can be swapped quickly. You can even replace it with an LED version if you want lower power draw and longer bulb life down the line.
Specs
Dimensions
- Overall dimensions: 5-1/2" diameter x 1-5/8" thick
- Light face dimensions: 4" diameter
- Distance between mounting holes (center on center): 4-1/4"
- Dimensions: 5-1/2" diameter x 1-5/8" thick
- Light face dimensions: 4" diameter
- Distance between mounting holes (center on center): 4-1/4"
Electrical
- Bulb type: 1157
- Power draw at 12.8V: 2.2 amps
Warranty
- Warranty: 1-Year limited warranty
- Recessed-mount trailer lights install with a grommet: which is often sold separately. These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.
M425 Peterson Trailer Tail Light w/ Steel Housing - Stop, Turn, Tail - Incandescent - Round - Flush Mount - Red Lens
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
Ratings & Reviews
4.8
1232 reviews
by:
Michael
08/05/2026
Fits 1996 american horse trailer. Great quality!
by:
Harvey pete moake
12/16/2025
exact replacement and perfect fit
by:
Ashley
09/17/2025
Exactly what we needed, great customer service, and incredibly fast shipping! Thank you!
by:
Elton
09/21/2025
Excellent fit for my 1964 Dodge wrecker!
by:
Daniel S
08/26/2014
Thanks. Order received in good order! Parts are exact replacements for the defective ones on my used 22 yr old trailer! That made installation easy! Thanks again for the availability and quick service.
by:
Manuel
03/01/2021
The product was exactly what I needed. In fact is was identical to the original tail light I was replacing. Fit perfectly on my 1951 m38 military jeep.with no modifications what so ever. I am very pleased with the purchase. I will be shopping here again.
by:
Craig
11/26/2023
ordered lights for a jeep build, service was great and more important comunication ofter lights were delivered coundn't have been any better
thanx very happy!
thanx very happy!
by:
Tommy f
04/26/2018
Received replacement taillights and they work great. Just like my old ones. Had the trailer for 34 years so time for some new ones.
by:
Mark
07/29/2024
Couldn't find replacement lights for my old 1968 5x8 utility trailer, I was pleased to find them on your site they fit exactly like the original ones. No funky/creative alternative mounts needed!
by:
Calvin L.
05/20/2018
Product arrived quickly and in great shape. They were a direct fit for my Fruehauf 4X8 trailer and they looked great, too. The same day they arrived, I was back on the road; easy installation.
by:
Joel G
07/16/2020
These lights performs like a champ! Happy with their function.
by:
Troy
11/12/2021
Great taillight
by:
Ben
11/01/2020
Best place to buy trailer parts
by:
David
08/17/2023
Just looks like they could have been packaged better.
I'm hoping they are ok. The communication was great though.
I'm hoping they are ok. The communication was great though.
by:
Michael
11/11/2021
Worked as intended
by:
Charles
02/04/2024
great details on products always seem to have whatever you need a 1 stop shop thanks etrailer
by:
Robert
10/15/2026
by:
Sherry
09/14/2026
by:
Joe
03/14/2023
JUST WHAT THE DOCTOR ORDERED. THANKS,
by:
Kenneth
12/17/2022
This is the exact light I needed.
by:
Thomas
08/30/2025
by:
John
02/12/2024
by:
George
02/07/2026
by:
Kara
07/21/2023
by:
Jean
10/07/2021
25
1232
true
Show More Reviews
See what our Experts say about this Peterson Trailer Lights
- Can Peterson Trailer Tail Light w/ Steel Housing # PM425-3 be Converted to LEDHey John, yes you could replace the bulb in the part # PM425-3 with an LED as it uses a 1157 style bulb. For a pair of red LED lights that would work we have the part # ARC63FR.
view full answer... - Is Just Replacement Lens Available for Peterson Trailer Taillight PM425-3Hey Jennifer, yes we have just a replacement lens for the Peterson light part # PM425-3 with the part # 410-15R. Did you break or lose your current one?
view full answer... - Tail Light Recommendation to Replace a SAE AIST 04 DOT 2The Red Trailer Light, Flush Mount # PM425-3 that you referenced would be the correct replacement light for your trailer. This light has a lens diameter of 4 inches. For further dimensions to compare to your old assembly check out the picture I attached.
view full answer...
- Replacement Lights for 1989 Interstate Box TrailerThe diameter you are looking for is 4-1/2" on the # STL42RB. This would be the widest part that would fit into the hole on your trailer. We do not have an LED option without the plug but we do have the Peterson # PM425-3. This has the same mounting hole dimensions and is also 4-1/2" at the widest point on the back. If you decide to stick with the Optronics light you will need the # A47PB or # A45PB.
view full answer...
- Peterson Trailer Light PM425-3 Round Lens Gasket ReplacementThere is not a replacement gasket that we carry for the lens of the Peterson Trailer Tail Light w/ Steel Housing - Stop, Turn, Tail - Incandescent - Red Lens # PM425-3. I recommended using the Loctite RTV 598 High-Performance Silicone Gasket Maker - Black - 2.7-Fl Oz Tube # LT37467 to keep moisture, dirt, and debris out of the assembly.
view full answer...
- Replacement Bulbs & Light Assembly Peterson Trailer Tail Light w/ Steel Housing On Circle J Trailer It appears you have the Peterson Trailer Tail Light w/ Steel Housing # PM425-3. You will need to lift the clip to pull out the lens and gain access to the 1157 Bulb # DI79VR. You can also consider upgrading to LED Bulbs # ARC93FR for increased bulb life.
view full answer...
- Replacement 4-Inch LED-Type Stop/Turn/Tail Lights to Replace Peterson PM425 Incandescent LightsThe Peterson Red Trailer Stop/Turn/Tail Light you referenced, part # PM425-3, takes an 1157-type bulb. We do offer replacrment LED-type bulbs in the 1157-type. For example, Putco offers their red 360-degree-radiation 1157 bulbs as a set of two, part # P231157R360. For a lower-cost option we also offer the CIPA EVO Formance 1157 Round White LED Bulb Set, part # CM93236. LED lights will substantially reduce the power drawn by your trailer - they use about 1/10th that of standard incandescent...
view full answer... - What Is The VIBAR Socket In The PM425-3, Red Trailer Light Is It A Brass Socket Or Something ElseThe VIBAR socket that is referenced in the item description for the Red Trailer Light, Flush Mount, part number PM425-3, is a vibration dampening feature that this light now has and does not affect how the bulb is installed in the light. You will still have a brass socket to install the 1157 bulb in and the VIBAR feature should allow the bulbs to last longer. This light is the direct replacement for your existing taillight.
view full answer... - Replacement Round Trailer Light for 4-5/8" OpeningFor a light that fits your 4-5/8" opening I recommend the Peterson Trailer Tail Light w/ Steel Housing - Stop, Turn, Tail - Incandescent - Red Lens # PM425-3. This light will fit a 4-1/2" diameter hole so your hole will be just a little bit larger. This light comes with a steel housing so the overall dimensions are 5-1/2" diameter x 1-5/8" thick. The distance between the mounting holes is 4-1/4" on center.
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Robert G
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Jeff D
Updated by:
Laura H
Updated by:
Brian T
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Joel G.
7/17/2021
They work just fine whenever I use the trailer. No problems after a year of occasional use.