Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you need to replace a worn or broken clearance light, this 4" long x 2-1/16" tall Optronics light drops right into place. It’s an oval, surface-mount design with 3" center-to-center mounting holes that match many factory setups, so you don’t have to drill new holes. It’s a dependable incandescent setup that connects easily with a single wire and grounds through the hardware.
Good visibility matters, and this light is built for it. The amber lens holds a built-in reflex reflector, so you don’t need a separate reflector to meet safety requirements. The P2 rating means it produces light at a 45-degree angle to either side of center for a total of 90 degrees of coverage—bright enough to serve as a clearance or side marker light when mounted correctly.
No complicated wiring here. The single-wire design makes it easy—power through the wire, ground through the mounting hardware. If the bulb ever burns out, just pop off the amber lens and drop in a standard 194 bulb. That’s all it takes to keep your trailer lights shining without hassle.
Built with a sturdy ABS plastic base and an amber snap-on lens, this light holds up well against vibration and regular road wear. It’s made for dry environments—perfect for trailers that don’t need submersible lights—and carries DOT compliance for peace of mind on the road. Plus, it comes backed by a 3-year warranty for extra confidence in the long run.
Ratings & Reviews
excellent products, etrailer has the parts I need. These light are even better built then the old ones.
I ordered this light and also a set of taillights. I messed up and had to amend my order and they were very helpful. Items arrived in a short time and were very good quality. Highly recommend them!
These connectors are great trailer wiring connections.
The product itself was great, i would have liked it better if mounting screws were included with the side markers. other then that i am very happy, and they work very well.
I needed a replacement lens for two of my clearance lights on an old RV. The lenses from this item fit the original mount and at the price I would expect to pay for just a lens.
It took a lot of searching and sleuthing to find these because there is no reference to the DOT number or the manufacturers number for the lens in the description.
Delivery was very prompt. Better than I expected.
Purchased trailer lights to replace old ones. These arrived in a few days, even with economy shipping and were exactly what I wanted.
Great replacement to match existing trailer clearance light configuration. Ordering was easy and shipping was quick.
Product was an exact replacement. I had difficulty locating this part locally but because of the great pictures and details on the etrailer.com site I was able to locate it. It was shipped promptly and would definitely recommend this company.
The light works as advertised. I added four more running lights to our fifth wheel for more safety as we drive down the road. After one year they are still working fine.
Very fast delivery, I didn't use the light only the reflector which came off easily. I used the reflectors which we're the exact same size to fit on the front of my 2011 Honda CRV-LX which did not come with the small parking lights but only had the cut outs for them, now the front looks real sharp after I glued the reflectors into the voids.
Lights were an exact replacement and matched the pictures perfectly. I had ordered some other lights (slightly cheaper) from another online retail giant (starts with A) but I was disappointed with quality and would need to be modified to fit my application. I should have just started here at etrailer.
I’m very happy with the clearance lights they work perfectly and they are bright and I am planning to replace all my clearance lights on the trailer and L I will continue To buy all my trailer needs with etrailer.com very happy with everything
Ordered missing/replacement Trailer Clearance side-light. Did not find it locally. Quickly found it on the etrailer web site for a good price. It was quickly delivered and "just what the doctor ordered".
Dr Dan
Great product,,Fast shipping,,,Great customer support
The clearance lights are a perfect matching replacement for the Bargman and Peterson brands that were used on the 80's RV's like my Allegro. The price was so good I decided to replace all 20 clearance lights
I appreciate the professionalism and integrity of the people at etrailer. In a recent order I placed I was delayed in thoroughly checking the contents of my order. I was still well within the 60 days. When I did look through the box I discovered I had not received an item. I'm thankful the company believed me and sent me the parts I had not received. I recommend etrailer and will shop with them again.
This light fit perfectly "inside" the light I needed to replace.
Doreen P.
1/19/2018
Have not had any issues with the trailer lights.
I was hoping they would be identical to the ones currently on our trailer but they aren't quite the same (blockier). Also, the original TT clearance lights have 2 wires coming off of the bulb socket and these only have one. They are intended (I assume) to use the screw that holds the base on as a ground connection to the trailer. That wouldn't work on our TT so I added a ground wire myself. I guess I should have seen the single wire in the picture but I missed that...
just as advertised, worked right out of the box, easy to connect, no issues.
I just needed a lens but the price of the complete light assembly was just about what the replacement lens was, and not knowing if the lens would fit my base, I bought the whole assembly. Turns out the lens fit tightly on my existing base. The light is well made and I expect it to last as long , or longer, than the original.
The products I bought form etrailer are superior to what I replaced on my 1988 stock trailer. The clearance lights both red and amber have a good grounding and 12v supply lugs. Solid lugs for positive connections unlike the old two piece units where the ground and positive connection fails between two cheap movable parts.
I'm very happy with the quality and construction of these lights.
I also ordered the 3 diode ID light bar looks good and works good.
On line ordering is fast and easy and delivery was three days to the west coast which is greatly appreciated thank you everyone at etrailer you do a superb job!!
Mark
7/18/2019
All lights still work as new, good product.
Great replacement for legacy installations and a direct replacement for my 1990 trailer.
These are the the standard clearance lights that work well
Perfect fit
Exactly as described. Quick shipping.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brian G.
11/11/2017
All products working ,,No problems,,,thx Brian