Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Perfect for Class A and C motorhomes with Power Gear leveling systems, these sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area provides added stability on soft ground.
Features:
Specs:
Check the listings below for some of the most common rigs that are compatible with this system. Note: You will need to measure your jacks to confirm compatibility, as the foot size/shape of the jacks on your leveling system can vary from model to model and year to year.
SnapPads install quickly and easily, and never need to be removed. Install each pad one at a time. Begin by placing the pad beneath your jack, ensuring that the pad and foot are properly aligned.
Lower the jack until the lip of the pad fully engages around its foot and locks into place. You'll hear a snapping sound once the pad is securely installed. Repeat this process for the remaining pads. Installation is permanent, so once you have the SnapPads secured, you'll never have to worry about crawling under your RV to place pads again.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com and today we're gonna take a look at the SnapPad PRIME Jack Pads. Now these heavy duty rubber pads are going to snap onto your class A or Class C motor homes power gear or quickie leveling jacks to make leveling faster and easier, eliminating the need to crawl under your trailer to position plastic pads or wood blocks. Now these pads are designed to fit 10 inch concave round jack feet. And let me turn this over here and retrieve my tape measure here. And just to give you a measurement of the overall diameter. So as you can see, diameter of these pads we're sitting right at 13-1/4 inches.
And laying this down here, pulling up my ruler here just to give you the overall height. We're sitting right at about 3 inches tall. And I measured these pads earlier before our time together and each of these pads weigh about 9 pounds. So as you no doubt know, the increased surface area of your leveling jack's feet is going to provide added support for your trailer preventing sinking into soft ground, unlike your smaller metal feet. Now these pads are made here in the USA of durable heavy duty rubber that are actually made from recycled tires.
So they're going to grip uneven terrain and prevent your metal feet from rusting or bending. On your screen, you see a photo of one of our neighbors who purchased these in the past and if you had never used these before hopefully that photo will give you kind of an idea of especially what these are going to do for you and look like on uneven terrain. Now these pads also feature built-in drains and that's gonna help release moisture to prevent your jack feet from corroding. They are also going to serve as a cushion so your metal feet won't crack or chip away at your driveway, and they're going to help dampen vibration from inside your motor home that could cause shifting. There's not going to be any need to remove and replace these pads or carry other jack pads or blocks around with you.
So as you can see these pads are going to offer quite a few benefits. So these are gonna be a simple one time installation. You're just going to line up the pads beneath your jack feet and lower each foot until the lip on the pad fully engages and locks in place. You're actually going to hear a snapping sound once the pad is securely installed. Now, installation is permanent so once you have the snap pad secured you're never going to have to worry about crawling under your RV to place pads again.
Now we do offer these in a few different sets and on your screen I am including our item numbers for the sets that we offer. So you can get these as a set of four, a set of three or maybe you're just looking for a replacement pad. And I am also including our item number for that replacement pad there on your screen. You can just take the item number that's going to best work for you, whatever set's gonna work best for you and put that item number in the search field of our website and it will take you to this set that you are looking for. Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
Ratings & Reviews
So far, so good!!! Received just in time to install prior to getting ready and heading out on a five day trip. I did the dish soap thing around the edge and easily installed by myself. I simply manually lowered the levelers until the Snap Pads could barely slide under, then aligned the Pads under the feet of the levelers and then lowered them into the Pads. Easy!
Now I’m not worried about leveling on my driveway pavement. Day two at a campground and so far we haven’t lost any stability in the motorhome on a mostly grass site.
In the photo, the orange Pads are only to keep rear wheel on the ground when leveled. If you enlarge, you can see the Snap Pads
have not put them on yet they look good and rugged i am happy with the jack pads
Easy install with a helper and a little soap.
I feel much better with this non-slip robust footpad installed.
Cannot attest to durability as I've just installed them but they seem very heavy-duty.
No more kneeling and situating pads when you get to camp!
E-trailer does it again!!
Excellent service!
Thanks to Daylon!
The SnapPad installation process was straightforward and the instructions were self-explanatory.
Fairly simple to install, does take two people (one to run the leveling system manually and one to line up the pads).
2008 Winnebago Journey 37h.
Great to see a company solving a big issue in the tire business of reusing used tires. GREAT PRODUCT!!
After 5 back surgeries, the SnapPad were an easy install and works great.
Extremely pleased with the look and performance
No more crawling under to place other supports that were less effective
They better then expected. Easy to install in minutes and fit perfect. Thank you E trailer for the quick delivery.
Highest quality possible!
Great purc hase!!
Had to wait to replenish stock, very satisfied with the process very good service. thank you!!!
Prefect fit for my 2002 Fleetwood revol ution
1year in and still one of the best investments for jacks.
I order wrong ones, they were very kind on the return and had replacements in days. I guess I'm old school, I hoped instructions, or a QR code for some would be included. I had to wing it.
The snap Jack Pads fit perfectly and work great. Thanks,
Went on easy, wife actually put it on. (I operated the controls). It has added stability and stabilizers no longer sink into the ground.
Fit perfect on my 2007 Holiday Rambler Imperial 42pdq, easy install.
Impressed by the weight and feel of the snap pads. Fast shipping by etrailer. I will be installing this weekend and will reassess if needed but they seem to be the ticket.
Great product! It was very easy to install in our Class A motorhome. Thank you for your support and time!
Leonid S.
8/17/2026
I used these jack pads for one year in my Class A Holiday Rambler Endeavor 40 SKQ motorhome. After traveling over 7,000 miles, I can confidently say that these pads are of very good quality. I appreciate that they eliminate the hassle of crawling under the RV to place wood blocks. They also provide exceptional stability, grip well on soft ground, and stay securely attached.
Do you have a question about this RV Jack Pad?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
David
8/21/2022
Still working out great!