bing tracking image
  1. RV Jack Pads
  2. SnapPad
  3. 9 Inch Jack Foot
  4. 2 Jack Pads
  5. Round Foot
  6. Lippert Leveling System
SnapPad Jack Pads for Class A and C Motorhomes w/ 9" Round Jack Feet - Qty 2
SnapPad

SnapPad Jack Pads for Class A and C Motorhomes w/ 9" Round Jack Feet - Qty 2

Part Number: SP54FR2
In Stock
$89.95
RV Jack Pads
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Perfect for motorhomes with Lippert leveling systems, these sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area provides added stability on soft ground. Includes (2) pads. Great Prices for the best rv jack pads from SnapPad. SnapPad Jack Pads for Class A and C Motorhomes w/ 9" Round Jack Feet - Qty 2 part number SP54FR2 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (1697)
  • Q & A (0)
  • Photos

SnapPad RV Jack Pads - SP54FR2

  • 9 Inch Jack Foot
  • 2 Jack Pads
  • SnapPad
  • Round Foot
  • Lippert Leveling System
  • Black
  • Permanent

Perfect for motorhomes with Lippert leveling systems, these sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area provides added stability on soft ground. Includes (2) pads.


Features:

  • Heavy-duty rubber pads snap onto your motorhome's Lippert leveling jacks to make leveling faster and easier
    • Eliminates the need to crawl under your motorhome to position plastic pads or wood blocks
  • Increased surface area of your leveling jack's feet provides added support for your motorhome
    • Prevents sinking into soft ground, unlike smaller metal feet
  • Durable, heavy-duty rubber is made from recycled tires
    • Grips uneven terrain and prevents metal feet from rusting or bending
    • Serves as a cushion so metal feet won't crack or chip your driveway
    • Helps dampen vibration from inside motorhome that could cause shifting
  • Built-in drains release moisture to prevent jack feet from corroding
  • Simple, one-time installation
    • Line up the pads beneath the jack feet and lower each foot until the lip on the pad fully engages and locks in place
    • No need to remove and replace pads or carry other jack pads or blocks around with you
  • Made in the USA


Specs:

  • Application: Class A and Class C motorhomes (see chart below) with (2) 9" round jack feet
  • Dimensions: 11" long x 11" wide x 2" tall
  • Weight: 5 lbs per pad
  • 2-Year limited warranty


Check the listings below for some of the most common rigs that are compatible with this system. Please note that you will need to measure your jacks to confirm compatibility.


Make Class Model
Coachmen A Encounter, Sport Coach
Itasca A Ellipse, Sunrise
Jayco A 26X, Alante, Precept
Jayco C Redhawk
Thor A Most models
Winnebago A Adventurer 38, Forza 34T, Journey, Sightseer, Tour, Windsport 31s


Simple, One-Time Installation

SnapPads install quickly and easily, and never need to be removed. Install each pad one at a time. Begin by placing the pad beneath your jack, ensuring that the pad and foot are properly aligned.


SnapPad jack pad installation

Lower the jack until the lip of the pad fully engages around its foot and locks into place. You'll hear a snapping sound once the pad is securely installed. Repeat this process for the remaining pads. Installation is permanent, so once you have the SnapPads secured, you'll never have to worry about crawling under your RV to place pads again.


SnapPad jack pad permanent install



XTRSP2 Snap Pad XTRA Jack Stand Pads for RV - 9" Round Jack Feet - Qty 2





Customer Satisfaction Score:

Ratings & Reviews

4.8

1695 reviews
Review sort icon
Perfect for motorhomes with Lippert leveling systems, these sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area provides added stability on soft ground. Includes (2) pads.

by:

These are replacement pads since I damaged one on a sharp turn that dug in and ripped the old one. The pads are very sturdy and well made and fit nicely. I would recommend using a lube to install them since they do fit tight and require the weight of the RV to set them correctly.

Larry profile picture

Larry

8/1/2022

All the pads are holding up fine to frequent use. Makes leveling less of a concern for you and the campground owners. They still look brand new.



by:

Purchased for the rear two jacks on my Grand Design Reflection 340RDS. I had always used portable rubber/wood/plastic blocks under these jack legs, but by using the SnapPads, I don't have to worry about that anymore. Waiting for them to come out with an option for my two front jacks since we use the Anderson Blocks for leveling. Great product!!!



by:

I gave a 3 star review because I ordered two pair of these Jack Pads. I paid for two pair but received only 1 pair. Something was amiss with the shipping department. I did call customer service and was very accommodating in the mix up on trailers end. I hope to receive the 2nd pair soon and can move the 3 star up to 5. Customer service is a 5. The product seems to be great quality but can't put them on yet as I need my second pair to put on my Jacks.



by:

These pads are great! They protect the jack foot and help keep the motorhome level. They are also easy to install.

Z Z. profile picture

Z Z.

2/23/2023

Still love them, wouldnt want to be without them!




by:

These pads have worked very well for us. They give the leveling jacks a larger footprint that helps prevent sinking into soft ground. They provide more traction on hard surfaces to prevent trailer movement. They also protect the paint on the jack feet to prevent rusting.



by:

Not worth the money. Fell off the brand new jack plates after the second use. Properly installed but the jack plates “mushroomed”. Lesson learned.

Matthew profile picture

Matthew

6/30/2022

No longer in use, one fell off on the road and the other does not stay on the jack.



by:

The Snap pads I purchased were for the landing gear of my 5th Wheel Trailer. They are one of the best items I purchased for my trailer. I bought the metal foot pads and added the snap pads. I has made my setup even easier when I park. I have owned them for a year now and they are holding up very well.



by:

The items were exactly what I needed and ordered. The review would have been a 5 star except the order was delivered in two separate deliveries a day apart and the packaging was enormous for the items. Felt a little wasteful. Great communication. Thanks again Etrailer!



by:

They are made very well and durable. I’m looking forward to use them for and months and years to come.



by:

Works just as advertised.



by:

Order was easy to do and came in two days. Great service correct items and kept me in the loop thru the whole process.



by:

I have ordered multiple items from etrailer and always get great products, quick service, and quick delivery. The instruction videos are excellent if you need help, and often cover much more than other sources. I will continue to order products from etrailer in the future.

Sidney profile picture

Sidney

7/17/2022

The snap pads work great. I have recommended them to several people.



by:

Great addition to the 5th wheel. Snaps into place as advertised, securing it to the aftermarker 9" round jack feet I installed previously. Love the convenience of no longer needing to put down jack pads when setting up the trailer.

Tim profile picture

Tim

7/10/2023

The snap pads are holding up great! I use them on concrete, grass, and hard packed gravel where my trailer is stored. Once they snap in they are in place permanently, now worries of them coming off. I have a second set of 9 round bare steel jack feet that I use for the andersen trailer jack blocks. I just change out the feet depending on my situation.



by:

Haven't used them yet, but they look st urdy.



by:

Very nice product, fit well and easy to install. Would definitely purchase again.

John profile picture

John

9/15/2025

A year later and the product is still doing it’s job. With no issues.



by:

Easy install. Popped right on.



by:

Arrived on time and work great!



by:

first trip out I lost 1 pad - bought 2 replacements and on the next trip I lost 2 and now 1 short again - decided not to replace

Jenny N. profile picture

Jenny N.

3/4/2022

I would be happy to help and I have a few follow up questions to ask. Would you be able to send a picture of the pad installed? What size pad is needed for your camper?

Larry profile picture

Larry

3/4/2022

Jenny, The pad is 9 inch but they only lasted 1 trip each time and last trip along the coast I lost 2 pads, I bought 4 and then 2. Here are the pictures.

Jenny N. profile picture

Jenny N.

3/4/2022

I did reach out to the manufacturer about the snap pads. It appears that your jack might be dished which is why it is not holding the pad. In the photos that you provided, the one with the Snap pad in the foreground and the bare foot in the back ground, the back foot is the one I am referring to. Being dished is where the foot has begun to bend or dish out of its original flat state which will not allow it to hold the pad on properly. This dishing or bending occurs as the weight of the RV pushes down on the center of that foot. The Lippert feet may bend on larger RV models and can bend at higher degrees on the rear feet or feet on the sides where there are slide outs. This is a flaw with the metal feet themselves, and, unfortunately, the only recommendation in these instances is replacement of the footplates.



by:

Works great. I left them on and travels half way across America. They really do make the RV more stable.



by:

I have previously had a 6 pc. set on my 5th wheel with the auto level system by Lippert. I ordered this 2 pc. because 1 of the pads had torn and I was afraid of it falling off and it gives me a spare. These are a superb product and they really help in spreading the load across a wider base on the ground. Best of all is etrailer has the best customer service, good prices and a wide selection of products. They are the best company to do business with.

Navypoppop profile picture

Navypoppop

6/13/2025

This product is a must for anyone that is rving. It provides a grip for the landing pads to set on the concrete and provides a wider footprint for support in gravel or grass. I highly recommend this product to anyone.



by:

Ordered these to fit my motorhome, asked the person at e-trailer that my feet were concaved. He assume they would fit..... They did not, now I have to purchase different feet.



by:

Great addition to my jacks. No sinking into hot asphalt or soft ground. No bending the jack bases on rocks. No scraping surfaces under the jacks. No concerns about sliding. Relatively inexpensive and appear as though they'll last forever....



by:

we had 4 of these when we changed to a newer 5th wheel we needed two more. These are the best things made. I like that they protect the metal feet. Easy to install.

Joseph M. profile picture

Joseph M.

4/29/2026

Its working out great. They were easy to install and we have had ZERO issues. they sit nicely on the ground no matter if we are on grass, gravel or blacktop.



by:

After aligning with leveling plates I had no problem with them snapping into place. Because my 9 inch plates were 4 years old and one was bent badly I replaced the plates with new ones first. These snap pads are so precise I didn't want to take a chance of them not snapping into place with a dished or bent plate. They worked out great and will help prevent damage to the new plates. I love them.

Claire H. profile picture
Etrailer Expert

Claire H.

6/10/2026

We're glad to hear everything snapped into place without any issues and that you're happy with the results. It's also great to know the SnapPads are helping protect your new leveling plates from bending. Thanks again for taking the time to leave a review, and happy camping!


25
25

See what our Experts say about this SnapPad RV Jack Pads

  • Which SnapPad Jack Pads Fit 2017 Winnebago Sunstar LX 27N
    Hey Skip! You will have to measure your feet to see if the SnapPad Jack Pads # SP54FR2 are the right size for a replacement. We don't have a way of knowing what's on there now, and your motorhome isn't in the known list from SnapPad. All you need to do is measure and see if that is a 9" diameter round foot. Assuming it is, this pair will replace the missing one and give you a spare. Any big trips coming up once you get the jack pad replaced?
    view full answer...
  • Need Snap Pads For 2026 Dynamax Dynaquest XL 3200kd
    Hello Kenneth, thanks for reaching out. We should definitely have the Snap Pads for that, but there is no way to look up your camper online to know the exact size of your jack feet. RV manufacturers just are not that specific with their online literature. Next time you are at your camper, check the diameter and shape of the jack feet. Make sure you check the front and rear feet as they can sometimes be different sizes. One of the most common we see are the 9" round jack feet, and if...
    view full answer...
  • How To Measure for Round SnapPad Jack Stand Pads
    In regards to the SnapPad Jack Stand Pads, if you have round shaped feet then you would measure the diameter from end to end. If the feet measures 9" then you can use part # SP54FR2. I have attached a full list of options below but there are no options for 13" diameter feet.
    view full answer...
  • SnapPad Jack Pads For Lippert Ground Control 3.0 With 9 Inch Foot Pads on 2021 Grand Design
    Yep, you're right on the money; the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System # LC358590 does have 9 inch foot pads, so you do have the correct fitting SnapPads: - SnapPad Jack Pads for Class A and C Motorhomes w/ 9" Round Jack Feet # SP54FR2 Even though the title says "for Class A and C Motorhomes" I did verify with the manufacturer that these are the correct fit for the 9" foot pads of the Ground Control 3.0 system.
    view full answer...
  • How Thick Are SnapPad Jack Pads
    The bottom portion of the SnapPad Jack Pads # SP54FR2 are approximately 1" thick but they are not meant to lift your wheels off the ground. If your wheels came off the ground that would mean you're putting the full weight of your RV onto the jacks, which is not recommend. These pads are meant to be installed on your jack feet to eliminate the need to crawl under your motorhome to position plastic pads or wood blocks. It also increases the surface area of your leveling jack's feet to provide...
    view full answer...
  • How to Choose SnapPad Jack Stand Pads
    The SnapPad Jack Stand Pads come in several different sizes based on what your camper is equipped with. I was unable unfortunately to confirm what your 2016 Thor Ace 30.2 was equipped with when manufactured. If you will take a quick measurement of the pads on your coach and let me know what shape they are I can recommend exactly what you will need for your application. These can range from 7"-12" and be square, round or octagonal. I have linked the entire selection for you to check out.
    view full answer...
  • Replacement Rear SnapPads For A 2020 Keystone Montana High Country 5th Wheel Trailer
    If you're needing 2 replacement 9" round SnapPads then you can get them with part # SP54FR2. You can also get singles with part # SP54FR. It does concern me though that your rear ones just fell off, since these are designed to "snap" into place and are pretty tough to remove. I recommend measuring your rear footpads and double-checking the shape to ensure proper fitment. If you come back with a different measurement let me know and I can find the correct pads for your 5th wheel.
    view full answer...
  • What Snap Pads Do I Need For A 2011 Thor Hurricane 31G
    We should certainly have the correct SnapPads for your 2011 Thor Hurricane 31G. Unfortunately the is no online database we can reference that will tell us exactly what size pads you will need based off of the year make and model of RV. If you will take a quick measurement of the pads on your coach and let me know what shape and size they are I can recommend exactly what you will need for your application. These can range from 7"-12" and be square, round or octagonal. Sometimes the front...
    view full answer...
  • SnapPads That Fit The Feet On The Lipppert Ground Control 3.0 Electric Leveling System
    Yes, the Replacement Rear Foot Pad for Lippert Ground Control 3.0 # LC377962 measure 9", meaning, the SnapPad Jack Pads for Class A and C Motorhomes w/ 9" Round Jack Feet # SP54FR2 will work great.
    view full answer...
  • SnapPad Jack Pads Recommendation for Class C Motorhome
    For your application you'll likely need the SnapPad Jack Pads for Class A and C Motorhomes w/ 9" Round Jack Feet # SP54FR2 since your 2022 Jayco 30Z motorhome is a Class C. We don't have a fit list though so you'll just need to measure the round plate at the bottom of the jacks and if they measure 9" the this kit is what you're needing! If you measure something else please let me know what you find and I'll be more than happy to see if we have something else that will fit better.
    view full answer...
  • Looking For SnapPads For 2004 Winnebago Brave With 8" Jack Feet
    Hello Ray, thanks for reaching out. We do offer SnapPads for the 8" round jack feet. Are all four of your feet round? I ask because sometimes the rear and front feet are different sizes. The 8" round SnapPads are sold individually as part # SP34FR. Or if you want a 4-pack use part # SP34FR4. I hope this helps. Leave a reply below with any other questions or comments and I am happy to get back to you.
    view full answer...


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Michael B
Updated by:
Michael B
Employee Shane H
Test Fit:
Shane H
Employee Jonathan Y
Video by:
Jonathan Y
Employee Mike S
Written by:
Mike S
Employee Andy C
Installed by:
Andy C

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.