| I.D. | O.D. | Use With: |
|---|---|---|
| 2.375 | 3.623 | #99 Spindle |
| Seal Cross-Reference | ||||
|---|---|---|---|---|
| Dexter # | Transcom # | National # | NOK # | Chicago Rawhide # |
| - | 23363SB | 475380/470825 | AF2284FO | CR23839 |
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today were going to review part number T51153. This is the redline grease seal. This grease seal is designed to be used on a hub and drub assembly that has a twelve inch by two inch size drum and a bolt pattern of eight lug six and a half inch bolt pattern. And the hub and drum assembly will fit on a number 99 spindle. This grease seal has an overall diameter of 3.623 and an internal or inner diameter of 2.375. And also if you go to the product page for this part number itll be listed a chart that will have a seal cross-reference and what thatll do is if you have a seal on your trailer now that has a part number on it and is a different brand you can look onto that chart and just cross-reference it and see if itll match up to this part number.
And that should do it for a review on part number T51153.
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
Ratings & Reviews
Shipping practice is atrocious. These were just kinda chucked in the box loosely with a set brakes and a strip of paper. Somehow they appear to have survived ok.
My first time ordering form etrailer Sarah made it simple and easy! Keep up the good work
Seal seems fine but does not fit my hub with a 14125A inner bearing. Needed a different brand seal.
None of the parts have numbers on them. I guessing they are the right ones. This is my only concern. It’s been my experience that the numbers are stamped on the parts.
Thanks
Exact fit that I need for the magic tilt trailer
Item was exactly as described. Shipping was fast
Didn’t get all the items I asked for . Received bearings without races and races without the correct bearing. Reorder the items missing the day I received the first order.
I appreciate the fast shipping!
These grease seals were hard to find, but etrailer had them in stock. They fit a 1979 EZ Loader boat trailer with twin 6 lug axles. My vintage boat trailer uses the typical 5200# wheel bearings, but uses a smaller O.D. grease seal than most similar boat trailers.
Chris was a huge help when I ordered these. I told him we have some pretty solid trailer parts suppliers in town, but they all struck out on this. He made sure I got the correct parts. I’ve already installed them, and it seems to be a proper fit.
Never got my order after I payed for one day shipping it’s been over a week and still haven’t seen it yet I won’t be ordering from them again
These were the right fit for my boat hub and axle. These are a different brand than the old seals I removed but they came up on the web site as replacement seals and the specs matched.
This size seal has been hard to find as it is on an older trailer with older axles. These were perfect and fit as expected and seemed to have a great seal on the axle. eTrailer again was great to work with as communications is the key thing they have always had. Thanks again and will be back again.
If you have a UFP/DICO 45263 hub (commonly found on 2013 Heritage/Tracker trailers with the original Vault oil-bath system), a successful replacement is:
CE Smith CE13315 galvanized pre-greased hub assembly
Replace the included grease seal with 13194 (1.372" ID × 1.979" OD)
Spindle uses L44649 inner and outer bearings
5 on 4-1/2 bolt pattern
13" trailer wheels
This combination has been successfully installed as a direct replacement for the original Unique BT/UFP Vault hub.
Item in great condition and exactly what I ordered.
Great response, the right parts and very helpful service.
Thanks Ricky!
All of the replacement parts were correct thanks to Ric’s help and expertise. We really appreciate his help. Customer service is excellent.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.