To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
The TruXedo Sentry uses 3/4" thick aluminum slats wrapped in a premium, 5-layer polyester and vinyl fabric to create a hard, roll-up cover that stands up to weather and impact. This hybrid-style design gives you the solid protection of a hard cover with the flexibility and sleek look of a soft one. The heavy-duty slats can handle up to 400 lbs of evenly distributed weight, guarding against hail or falling objects while keeping your cargo secure and dry in extreme temperatures from -40°F to 120°F.
You don’t have to remove the cover to haul bigger gear. Just pull one of the release cables at the tailgate and roll the cover toward the cab. Safety straps keep it secured while you drive, and the compact roll won’t block your rear window. It unlocks from either side with slam latches and rolls up fast, giving you the space you need for tall or bulky items without losing protection when you’re done.
The side rails mount inside the bed rails and sit at a 15-degree angle, so the cover rides just 1/2" above the bed for a flush, clean look. The low profile cuts down on wind drag and noise, which can help improve fuel economy. Because the rails don’t overlap your stake pockets, you can still use tie-down anchors, rail caps, or bed liners without interference.
When you close the tailgate and press down on the corners, the slam latches automatically lock the cover in place. Additional mid-bed latches engage at the same time for extra theft protection, sealing the edges so nobody can pry it open. Rubber seals along the rails block water and dust, keeping your cargo clean and dry even in rough weather.
Installation is simple and tool-free with bolt-on clamps that secure the rails inside the bed. The built-in self-leveling design keeps the rails square so the cover rolls smoothly every time. If you ever need to take it off completely, the quick-release guides let you remove the entire cover in seconds without a wrench or drill.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
The Sentry and Sentry CT by TruXedo are hard roll up style truck bed covers that feature an extra low profile.The Sentry comes with a leather grain vinyl fabric and the Sentry CT comes with woven matte black fabric. Both feature fabric that is pressure bonded to heavy duty aluminum slats, making Sentry the ultimate in durability and security.Each cover ships with a cover assembly, driver and passenger side rails, and all the hardware necessary to install it on your truck. The only tools necessary are a half inch wrench and scissors.Clean the bulkhead area with alcohol. Adhere the rubber seal to the bulk head, making sure to align the seal with the inside edge of the bulkhead. Trim the seal to sit flush with the bed caps.Position one side rail on the truck bed. Make sure the rail sits level on top of the truck bed.
Slide the rail towards the bulkhead so that the foam seal is compressed about half way. Install a clamp in the center of the rail, using a half inch wrench to tighten.Install the real clamp about 12 inches from the tailgate. To ensure a proper seal, put pressure on top of the rail when tightening. Install the front clamp about 12 inches from the bulkhead. Repeat on the opposite side.Place the cover assembly on the rails at the bulkhead.
Line the screw head on the underside of the cover assembly with the slot in the rail on each side.Slide the header guides towards the rail to secure the rolled cover to the rails. The header guide will click when it is securely fastened.Unroll the cover to the tailgate. Close the tailgate. Then push down on the end of the cover to latch both sides. Secure the hook and loop on both side rails before driving.To open the cover, drop the tailgate and pull down on a release cable.
Lift and roll rear header.To drive with the cover in the open position, both straps must be secured to the restraining straps. To releasee the strap, push the tab up.The installation is now complete.
Ratings & Reviews
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Allan
5/17/2025
Cover is holding up great. Gets everything dry in the bed of my truck. If you are thinking of buying one, just do it. Great product