To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Getting in and out of the bed is quick with the Bedlocker’s electric retractable cover. A motor wired directly to the battery opens or closes it with the push of a button on the key fob. It takes less than 30 seconds from fully open to fully closed, and an electro-magnetic brake lets you stop and lock it anywhere along the rails for partial coverage when you need it. There’s also a manual release lever on the canister so you can still use it if power is lost.
Rain, snow, and wash water stay out thanks to aluminum panels joined by silicon weather hinges and a barrier seal at the tailgate. The canister has built-in drain tubes that route water through factory bed holes so it doesn’t collect inside. The rails even have a water management system that keeps moisture from freezing in cold weather, so your cover works smoothly year-round.
The cover sits level with the top of the bed rails for a clean, streamlined look that also helps reduce wind drag. The angled canister only takes up about 13 inches from the cab and drops roughly 14 inches into the bed, leaving plenty of room for tools or gear. Because it’s tucked below the window line, you keep an open rear view even when the cover is retracted.
The interlocking aluminum panels have a black powder coat finish that resists corrosion and helps prevent theft better than soft covers or fold-ups that can be pried or cut open. When used with a locked tailgate, the cover seals tightly to protect whatever you’re hauling. The electro-magnetic brake locks it at any point along the bed, so you decide how much to expose or secure at once.
Installing the Bedlocker doesn’t require drilling into your truck. The rails attach inside the bed using pivot-arm clamps that self-level with built-in kickstands for proper alignment. Once clamped in place, connect the drain tubes and wire harness, then plug into the battery to finish up. It’s a straightforward setup that stays solid once tightened down.
Ratings & Reviews
After getting all of the parts I can put it in now
great product. exactly what i expected and easier than imagined to install.
Great product, easy install no more removing tools every night!
Real good all in all. Does rub in the holding box whenever it’s all the way rolled in. Minor, but rubs.
The remote doesn’t always work. Sometimes you have to jar or push in the cover to get it to engage.
Great tonneau cover. One year later and still functions like new.
Great service,
Installation went good and it opens/closes smoothly as of today Monday 8/26/2024. Customer service was fantastic when I called them twice.
ALL GOOD FAST DLV
My last truck had the Pace Edwards Bedlocker, so when I got a newer truck I had to get another Bedlocker. Great security. Electric opening without a key. To someone wanting to break into the bed there’s no apparent way to open it.
looks and works great!!! easy install fit my 2024 gmc sierra 3500hd denali perfectly
I love this tonneau. I would reccomed going with this model, but getting the tracks that support their racks. It was Covid time and stock was short. I was lucky to get this one. I would go with 4.5. I think they should have put a more powerful motor. Sometimes it doesn't have the power to open all the way. On another note etrailer was awesome. The rails were bent when the shipment came, they took rails out of there last one in stock and sent them so I could get it installed before my cross country trip.
Excellent, as always!
I was looking for the very best for my 2022 Chevy Silverado 3500HD High Country and when you want the best, you get Pace Edwards. I've owned other brands before on other trucks such as Roll-n-Lock and ReTrax and both are great products, but for this truck, I wanted nothing but the best. With the track record and quality that comes with Pace Edwards, this is why they are the top of the line. I installed this cover completely by myself, a helper would have been nice to have, I was able to get it done with no issues.
The cover fits perfectly and looks like it was supposed to be there. etrailer's customer support is always top notch and the representative I spoke with on the phone made it so easy to order, she was very friendly and helpful. Everything came well packaged and undamaged. The 2 included remotes are nice, but I also ordered to sets of the accessory wired switch kit. I wired them together, sending 1 switch up front, inside the cab. The other to the back corner of the bed wired up to a weatherproof switch. I spent more time on the wiring than I did installing the cover.
The only thing that kinda bugs me (and this is 100% personal preference NOT an issue with the product) is the tailgate seal at the edge of the cover, the shape and design of the seal is such that it's a double wall flap with a hollow center. Now they may have intended it to sit on top of the edge of the tailgate, but I prefer how it looks butted up against the tailgate like a door seal, which makes a U shape. However I have to keep pushing it down to keep it flat across the back. I may end up sliding a small round piece of weatherproof foam inside, all the way across to create more of an bicycle tire affect, the foam keeps the seal "inflated" while pressure holds it tight when closed up. But that's just me.
Overall, VERY pleased with the products and service. The cover and wiring harness are both high quality, comparable to GM factory. I highly recommend this, well worth the money.
ALL GOOD FAST DLV
The best cover ever my first one is 2011 is still working and this one works great also
very nice product, Amy J in customer service was awesome to work with! A+ all around
Love the pace Edwards electric retractable bed locker cover with remote. Super convenient .Looks great.
It is not 100% leak proof, minor water intrusion . Also below zero temps the cover will freeze up if accessive water is on it. I rinsed my truck at self serve car wash 20 degrees out and the cover froze up and could not get my Christmas tree in it.I was on a northern Christmas tour. Had to un thaw before it would open.however I do live in Florida so freezing is a non issue … this cover fits RAMBox which many covers will not.
The canister is a bit heavy and awkward for one person to get into the bed. But if this old guy can do it, so can you. Followed the instructions and, for once in my life, didnt have to take something apart to redo it correctly. Just take your time and its actually quite simple. The cover works perfectly, almost completely waterproof seal (maybe I just got lucky) and makes getting access to the bed 1000x easier than the trifold on my previous truck. Top quality, fit and finish are perfect. Would recommend Pace Edwards every time.
The cover does not work for carbon pro bed,even though in 2 places in your website it confirmed it did. We had to repackage and return. Your website needs corrected,and no one seemed very concerned. Bad experience. I hope I get my credit in a timely m
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.