bing tracking image
  1. Tonneau Cover
  2. BAK Industries
  3. Fold-Up - Hard
  4. Flush Profile - Inside Bed Rails
  5. Rack Compatible
  6. Aluminum
THIS ITEM IS NOT A FIT FOR
1999 Chrysler 300
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
BAK Industries

BAKFlip G2 Hard Tonneau Cover - Folding - Aluminum

Part Number: BAK68AV
In Stock
$1,099.99
Retail:$1,211.78
You Save: $111.79
Tonneau Cover
Not Confirmed to Fit

1999 Chrysler 300

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Get top-notch style and versatility with this all-aluminum tonneau. Quad-fold cover sits inside your vehicle's bed rails and secures upright for unrestricted bed access. Textured, black paint finish provides durability. Great Prices for the best tonneau cover from BAK Industries. BAKFlip G2 Hard Tonneau Cover - Folding - Aluminum part number BAK68AV can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (66)
  • Q & A (0)
  • Photos

BAK Industries Tonneau Cover - BAK68AV

Highlights

  • Custom Fit for Your Vehicle: Secures to your truck bed with model-specific clamps and hardware
  • Hard Cover Keeps Everything Out: Locks with tailgate so gear stays protected from theft and weather.
  • Full Bed Use: Folds up or flips against cab for hauling large cargo without removing the cover.
  • Built to Last: 1/2" thick rustproof aluminum panels with UV-resistant black paint finish.
  • Keeps Cargo Dry: Matte rubber seals and drain tubes route water out of the bed.
  • 10 Minute Install: No drilling needed—rails clamp inside bed with a wrench.
Made in USA

Features to know about

Full Bed Access: Quad-Fold Aluminum Design

When you need to load a tall toolbox, furniture, or building supplies, you don’t have to remove this cover. The BAKFlip G2 folds all the way up and stays upright using built-in prop rods, letting you drive with the bed completely open. You can also secure it partway open with integrated buckles if you want rear-window visibility. The low-profile rails sit inside the bed, so you still have full use of stake-pocket mounts and side-rail accessories.

Animated diagram showing the BAKFlip G2 Hard Tonneau Cover folding open and closed on a pickup truck bed

Pickup truck with BAKFlip G2 tonneau cover folded upright against cab showing full bed access

Prop rods holding BAKFlip G2 tonneau cover upright behind the cab of a truck

Everyday Security: Automatic Latching Panels

Each aluminum panel latches automatically as you close it, locking in place under its own weight. Once the tailgate is shut and locked, the bed is sealed—no one can lift or pry the cover open. The 1/2-inch-thick, rustproof panels are sturdy enough to stop anyone from cutting or peeling them up, giving you dependable protection for tools, gear, or groceries.

Close-up view of BAKFlip G2 tonneau cover latch and release cord mechanism

Weather Protection That Lasts: Seals and Drainage System

Rain and car-wash spray don’t stand a chance against the G2’s matte black rubber seals and built-in gutter system. Any water that gets past the edges runs through the rail channels and out via drain hoses behind the cab. The corrosion-resistant black finish and UV-stable coating keep the panels looking sharp after years in the sun.

Strong and Steady: Aircraft-Grade Frame and 300-lb Capacity

Built from rustproof aluminum with an insulated core, the panels hold up to 300 lbs of evenly distributed weight when closed. The frame rails are aircraft-grade aluminum with a black powder-coat finish for added strength and corrosion resistance. The hinges and latches are glass-filled, aluminum-housed nylon for smooth, long-term operation.

Hassle-Free Setup: Clamp-On, No-Drill Installation

You don’t need to drill or modify anything to install this cover. The side rails clamp directly to the bed rails, and the front hinge rail bolts in place with included hardware. Slotted brackets let you fine-tune the fit with a wrench so the panels sit flush and operate smoothly right out of the box.

Installation of BAKFlip G2 tonneau cover showing clamped frame rails inside truck bed

Specs

Construction and Materials

  • Panel thickness: 1/2"
  • Panel material: Rustproof aluminum
  • Panel core: Insulated, closed-cell foam
  • Rail material: Aircraft-grade, rustproof aluminum
  • Rail finish: Black powder coat
  • Seal material: Matte black rubber
  • Finish: Black paint with hair cell texture

Weight Capacity

  • Supported weight (evenly distributed): 300 lbs

Installation

  • Installation type: No-drill
  • Mounting location: Inside truck bed side rails
  • Tools required: Wrench
  • Attachment method: Clamps for frame rails; bolts for front hinge rail

Operation

  • Design: Quad-fold
  • Locking mechanism: Automatically latching panels
  • Release system: Dual release cords on each panel
  • Prop rods: Included for securing upright position
  • Buckle system: Integrated buckle and tie-down straps

Performance and Protection

  • Weather protection: Rubber seals and built-in drainage system
  • Corrosion resistance: Yes
  • UV resistance: Yes
  • Wind drag reduction: Aerodynamic design

Fit and Compatibility

  • Profile: Low-profile, sits inside bed rails
  • Accessory compatibility: Stake-pocket-mounted accessories and raised side rails
  • Operation with tailgate: Opens at tailgate; secures when tailgate is closed and locked

Warranty and Origin

  • Warranty: 3-Year warranty
  • Country of origin: Made in the USA

226146 BAK Industries BAK Flip G2 Hard Folding Truck Bed Cover

Installation Details BAK68AV Installation instructions

This Product Fits The Following Vehicles




Ratings & Reviews

4.6

66 reviews
5 Stars
(46)
4 Stars
(14)
3 Stars
(4)
2 Stars
(1)
1 Star
(1)
Review Sort Icon
by:
2018 GMC Canyon
Very easy to install. I didn't use the instructions (no, I'm not one of those guys). I used the installation video on the BSK G2 tonneau cover on etrailer.com! It arrived in just a few days and was very well packaged. I can finally store things in the bed of my truck safely. Way to go etrailer and BAK Industries!!
Steven M. profile picture

Steven M.

5/20/2020

It has been holding on strong. One of the weather strips was coming undone, but I was able to adhere it back down.

by:
2011 GMC Canyon
I ordered a Bakflip tonneau cover and fob lock for my tailgate. Instructions on the cover were perfect. It looks great. Absolutely no institutional videos on my 2011 GMC Canyon for the remote. The wiring connection portion of the install was just past tedious. Once figured out it works like a dream.
Bud profile picture

Bud

3/2/2020

Still is exactly what I hoped it would be. Adds security to my pick up bed, looks great and gets compliments. Plus it is easy to use. Great product...

by:
Dodge Ram Pickup
Ok the cover is great if you use it to secure items in the back but, the down fall is how the system attaches to the Ram trucks. The pressure applied by the bolts for securing the side rails causes the manufacturers bed rails to buckle in the middle which, is minimal if you live in a cold climate but, for the majority, it causes issues. I love the security but I hate what it does to my bed rails.
by:
Excellent cover! Easy to install. Looks way better on my truck than the old one and being able to fold it all the way up against the back window is very nice.
Mike H. profile picture

Mike H.

3/12/2026

After using it for a while Im extremely happy with this cover. It has been a game changer, making my 2008 Ford Ranger bed far more useable and convenient for carrying a variety of items. One of the best purchases Ive ever made for it.

Lazer S. profile picture
Etrailer Expert

Lazer S.

3/12/2026

@MikeH Glad you are liking it! Hard covers are definitely the way to go! ^___^ What do you typically keep in your bed? I have a milk crate with some survival type things and various tools in it. One can never be too prepared!
by:
2020 Ram 2500
This cover works great and was very simple to instal. Didn’t take much time. The only thing I can recommend is that the instructions are kinda hard to follow at the begging.
by:
I have had many brands of hard covers and this one out performs the others.
The installation is critical especially with the RAM box configuration as I have.
All the parts were supplied. Take your time, read and measure twice cut once.
by:
This cover has been perfect for my application. Previously I had an electric motorized unit that leaked badly when it rained and had no mechanical override in the event the truck was not running. This cover is nearly waterproof and is easily opened and held open for travel if I choose to do so. It looks and works very well.
by:
It’s well built and stout. Installation was a little tough. I’ve had to adjust lock tabs a few times. It sure works great keeping wheelchair covered.
by:
Good product. I had to re-drill the prop rods for the cover. They were no where near where they should have been. Other than that, the installation went pretty well. Not quite as sturdy as the one I bought 15 years ago from the same company.
by:
Camera mounting seems off alittle compared to the original tried adjusting but still the same view
by:
The BAKFlip G2 Hard Tonneau Cover has done an excellent job of protecting our various item in he truck bed while running around town or out camping. It is a good solution to securing items in the truck bed from casual theft.
by:
I bought this cover so when I tow my fifth wheel camper I can open up and still leave a section closed to cover my air compressor and inverter and when I drop the trailer I can cover my hitch and lock it. It works perfectly for my application. Great quality and sturdy.
John profile picture

John

5/3/2024

After a year of use the cover still works perfectly and I would highly recommend this cover. I really like the fact that you can open up different sections without having to open the whole thing.

by:
Difficult to install
Makes noise at highway speeds
Need pliers to get latches to click into rails to hold on
Flimsy
Poor quality
Lazer S. profile picture
Etrailer Expert

Lazer S.

10/7/2025

Hi Mardy. I have heard this to be a difficult install and the latches to be stiff (though adjusting them helps), but noisy, flimsy, and poor quality are firsts for a BAK product like this. What kind of noise are you getting? Is something maybe not tightened down all the way causing part to stick up? And, what part are you finding flimsy or poor quality?

by:
2013 Toyota Tacoma
The tonneau cover is excellent when you get it installed properly. I can only give it a 3 rating because the workmanship of their latches the way they installed them was very shabby. Had to move all the latches back into their frame so they would not hit the side rails, had to re-drill holes that fastened most of the latches to the frame. If they would have taken their time installed the latches properly, then it would have been an excellent tonneau cover all over.
Conley J. profile picture

Conley J.

3/26/2018

After year of use I love the tonneau cover. had issues installing but after using for a year I would give it a five star.

by:
This cover has made leaving items in our truck bed much easier.
I do wish it had a way to secure it when not fully open, I.e. one section open.
by:
Love this cover. It was better than I expected. Equally as important I like working with etrailer. Good people that understand and can explain the details of their products. I have used them for a lot of stuff for my boat trailers always with good results.
Tom L. profile picture

Tom L.

7/23/2018

Actually its closer to two years and I could not be more pleased. I have done a few rainy road trips and the one thing that worried me was if it would keep the contents dry and it did. Al else about the cover has been good too. Good product and it fit like a glove.

by:
I was impressed with how your company staff received my order request, how company staff kept me updated on order status and delivery. Installation went very well. The instruction manual was well detailed. I am very satisfied with your cover. The cover fits perfectly. I continue to receive compliments. Thank you from a very satisfied customer.
Sid M. profile picture

Sid M.

1/19/2023

Pleased with product. Working out well.

by:
Great Tonneau Cover for my Ford Maverick, no issues in a year so I don't suppose there will be any. Fit is perfect and adds class to my little truck. Thanks for a good product.
Al O. profile picture

Al O.

12/30/2023

Great product, I have had no problems whatsoever and it enhanses the look of my truck.

by:
2017 GMC Sierra 3500
This is the second BAKFlip G2 Hard Tonneau Cover we have purchased. The first was for our 2005 Chevy. This is for our 2017 GMC. The 2005 fit much better. The 2017 model is not wide enough to actually fit the bed allowing water to easily enter the bed. Also the posts that hold the cover up against the cab were drilled wrong. You have to remove the slide to fit the prop rod. They simply drilled the hole for the nutzert in the wrong spot on the passenger side. Just not the same quality fit or finish as the 2005 version. We would have returned it but sending it back was going to be too much of a hassle due to its size.
This cover is now completely junk due to a hail storm. No fault of BAKflip but the hail storm destroyed the cover is seconds. The aluminum used in this model is just too light to protect from any type of impact.
by:
2019 Dodge Ram Pickup
We purchased the BAK Industries BAKFlip G2 Tonneau Cover for our 2019 Ram 2500. We use this cover for security/keeping the weather off of our camping accessories for our RV. The cover works great and is fairly waterproof. The only issues we have had is the 1st latching cable, most of the time we need to pull the cable release from both sides to release the locking lugs to open. Over-all a good purchase, and would recommend it for anyone looking for a hard cover.
by:
Overall, a good product. This is the third BakFlip I've owned on different trucks. Quality wasn't as good as older units. The wires to release the latches are too long and get trapped inside the cover so you can't reach them. I added pieces of tape to fix this problem. Also, the nylon straps to hold it open are a nice addition but the plastic buckles broke almost immediately. Older units with metal rings for you to attach bungee cords was a better design.

As always, etrailer service & delivery are outstanding!
by:
Ford F-350 Super Duty
This is the third Bak flip G2 Yard Tonneau Cover. Like that they are strong enough to hold test shap and fold flay enough the I can use the bed camera on my F-350 to help me hook up to the 5th wheel. And when it is closed and my tailgate is locked does provide some protection against theft of anything in the bed. I would recommend the cover to anyone that needs one.
by:
Great cover!! It was easy to install and has kept everything stored under it clean and dry. I would definitely recommend it.
Jim profile picture

Jim

12/2/2024

Generally this cover continues to perform well. There is a small leak, which I haven’t been able to locate, but it’s not enough to do any harm to whatever may be in the bed. I would still recommend this cover.

by:
2005 Ford F-250 and F-350 Super Duty
great cover for my 5th wheel hitch and any loose items I carry. Just flip 3 times to tow my 5ver and go.
Terry profile picture

Terry

4/6/2019

still a great cover then and now.Would not change a thing

by:
2015 Chevrolet Silverado 1500
I ordered & received the alunmiun truck cap. Received it 4 days after it was ordered.
It took about a half hour to install. Looks & works very well.
I am very pleased with the ordering process, delivery & installation. Looking forward
to doing business with you again.
Thanks again, Gary B.
Gary profile picture

Gary

6/8/2018

doing fine with truck cap. still looks & works great

25
66
true
Show More Reviews

See what our Experts say about this BAK Industries Tonneau Cover


Info for this part was:

Employee Wilson B
Updated by:
Wilson B
Employee Matthew S
Written by:
Matthew S
Employee Daron K
Edited by:
Daron K

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.