To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Most tonneau covers force you to choose between bed protection and your toolbox. This cover is built to fit right behind most 19"–21" wide, over-the-rail toolboxes, so you don’t have to give up storage in the front of your bed. A custom header bar forms a tight barrier against the box while an Element weather seal keeps dust, rain, and snow from sneaking in. The cover sits just 1-1/2" above the bed for a smooth, finished look that still clears your toolbox lid with room to spare.
Rain, heat, or snow—this cover handles it all. The double-coated, reinforced vinyl blocks UV rays so it won’t fade or crack, even when the temperature drops to –40°F. Black powder-coated aluminum rails and bows resist rust while keeping the cover tight. Together they create a sturdy frame that stays flexible in any weather and keeps your cargo protected year-round.
When you need full use of your bed, just roll it up. The soft top unseals from the hook-and-loop sides in seconds and stores neatly behind your toolbox using premium straps and clips. The Deluxe AutoLatch II automatically locks both sides when closed, and a simple pull of the release cord opens it with one hand. Add a tailgate lock (sold separately) and you’ve got secure storage that’s easy to get into when you need it.
Temperature changes can loosen a soft cover over time, but not this one. The XT-Dial lets you fine-tune the tension right at the front of the bed—no tools needed. Just turn the dial until the vinyl sits perfectly snug across the rails for a clean, quiet ride that doesn’t flap at highway speed.
Because the rails mount inside the bed, you keep access to stake pockets for racks or tie-down anchors. Aircraft-grade aluminum clamps hold everything firmly in place without drilling, and they’re designed with special teeth that grip into the rail ridges for lasting strength. Whether you run ladder racks or overland gear, this setup keeps your options open while keeping your bed covered.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Adam: What's going on everybody Adam here with etrailer. Today, we're going to be taking a look at the Access Toolbox Edition Soft, Roll-Up Tonneau Cover. Line of Access Tonneau Covers is going to be able to fit a wide variety of different trucks, use the etrailer fit guide to put in your year, make and model of your truck to find the exact fit for your truck bed with toolbox.You all know the many benefits to having a tonneau cover, yes, it's going to protect all the contents from all that rain and snow that you may have, also it's going to increase your fuel economy. But also the main thing for me is just to protect anything from theft, because people just have sticky fingers, but sometimes you really don't have the option, you have both a toolbox and a tunnel cover. Sometimes you really just have to pick one or the other. Well, this is the main benefit to having this tonneau cover.
We can have the lock box here, have all our tools and stuff in there and have all of our fun recreational stuff in here. And since we have a locking tailgate, everything is nice and secure.It is a very durable vinyl material and it is going to resist against the sun and all of the elements that mother nature's going to throw at it. And it's going to keep all of that water out too. And it is pretty low profile as well with the toolbox, we're losing a little bit of the rail space, but with the tonneau cover, we're not. So if you're like me and you like to talk after maybe around a golf or maybe after a long day at work, but you still have these rails to sit and relax.The Access Tonneau Cover gives you quick and easy access because all you got to do is just grab this little string here, pull that down, one hand, that's all you got to do.
And then you can go ahead and roll all this up, just like that. So you can go ahead and if you're going on a trip and you want to keep your bed open, whether you have contents in there or you just like it better that way, we have these little straps and they're just going to click right at the back of the cover on both sides and we can adjust this. I can actually roll it over one more time, maybe we can go ahead and tighten this up. It's going to hold this back on here and just grab this and bring it forward. Nice and tight.
Just like that.With the tonneau cover rolled up, we can get a closer look at our rails. So these are going to be made of an aerospace grade aluminum. So they're not going to rust away over time. And even the clamps are made of this aerospace grade aluminum, which is great. So they're not going to rust.
It's going to be easy to take on and off if you need to, but it looks good. So you don't really have to. And we do have a powder-coated finish too. So it gives a nice little look, blends in with the side rail colors on our Silverado.If you're tired of having to choose between a tonneau cover or a toolbox, etrailer has got a solution for you, the Access Tonneau Cover, it works just as well as any other soft, roll-up tonneau cover, but it just makes your truck to be able to do more. And that's something I like because trucks are made for working. And it also looks really good too.And that just about does it for our look at the Access Toolbox Edition Soft, Roll-Up Tonneau Cover. And I'm Adam with etrailer.
Ratings & Reviews
Overall, Happy with this product. Relatively easy to install, however, I recommend doing it with a partner to make it easier. Fits great with my Weather Guard toolbox and gives the truck a great look overall! Super easy to open and close and provides way more security than having the bed open for all to see.
Great service. Arrived on time. Easy to install
This cover is a perfect match for a tool box! It comes with everything needed to seal the front of the box and then seals for around the cover. It rolls up and the clips hold it in place as it should. The adjustment knobs make sure you will get the best fit and coverage.
Real nice and easy to install.
I've been looking for years for a cover to fit my bed with the toolbox and all I ever heard was they don't make them. I love this cover and thanks etrailer. I was a little confused with the instructions provide, so it was a combination between the video and instructions that helped me complete the task. I really recommend if your in the market for this kind of tonneau cover.
We love this tonneau cover! This is our third purchase of the same cover. We upgraded to a 2024 Dodge Ram and unfortunately needed the new fit. This is easy to install and wears extremely well. Our old tonneau cover purchased 3 years ago looks literally brand new. I am grateful that this company makes an affordable solution to covering the bed of your pickup and allowing for a toolbox as well.
Well I cannot rate the product. But UPS did a 5 star job of delivering it to my door in 5 below temps. Until it melts out there, I am not going out.
Love my cover so much! Highly recommend!!! My cover has been all over the country from the coast of the redwoods of California to the deserts of southern Utah to the plains of Kansas for construction aiport projects my cover has protected my belongings, my truck, and myself!!! Thank you so much for an amazing product!!!
Cover has lived up to expectations. Easy to install. I integrated it with a 5th wheel tool box which conveniently allows separate access to either. Protects my hitch from the elements when I am not towing. Easily rolls up and down. When rolled up, it does not block my rear view when I hitch my 5th wheel. Stays securely fastens when closed. No water intrusion, even in a car wash. Every couple of months I apply a good coating of a quality vinyl UV protectant.
The cover fits well over the truck bed and snug against the tool box. RAM 3500 with 8' bed.
Installed on a 2013 F150 with 6-1/2' foot bed. I had already installed a toolbox across the bed rails and then decided to add an Access cover since I knew I could get this tool box compatible version. I had an Access cover on a previous truck and knew I wanted the same brand again.
Plan on buying additional bulb weather stripping as the cap between the tool box and the front of the bed is wide depending on tool box width. My gap was wider than what came with the installation kit. You have to put the toolbox exactly where it needs to meet the bed cover header.
Installation was easy for the cover as the struggle was getting the toolbox weather stripping installed. I put the bulb seal in the kit on the front of the toolbox and then added my larger bulb weather stripping onto the front of the truck bed so that both mated up once the toolbox was put back into place per the instructions. Any local parts store should carry the seal material.
I do like how you need to open the tailgate to operate the latching system. If you lock your tailgate, it cannot be accessed. My previous Access cover had a push button you could use to unlatch the cover with the tailgate closed. Not great if you want to keep other out of your truck bed.
Surprised by the early delivery! Installation instructions need some help, but the product is just what I wanted for our '20 F350 DRW.
happy with the results they all where not installed yet but measured the pieces and they and were all within tolerance went to Home Depot and bought some weather stripping as the tool box (huskie) WILL HAVE TO BE FARTHER out so you can open it full without hitting the rear window and still have a water tight seal
We travel a lot with our RV and frequently keep stuff in the back of the truck. I wanted something to hide it all. This cover is excellent. It looks fantastic and is easy to use (roll/unroll). Installation was okay but two sets of hands or clamps make it a lot easier. The instructions are just okay but it all worked out. The cover was a smidge short so I had to double-up on the rubber seal at the tailgate. No biggie. Also, no need to have a separate cover for my 5th wheel hitch. Very happy!
Wow, this Tonneau roll up bed cover is absolutely great. I like the quality of all parts, ease of installation and finally the look! Installed on my 2016 Ford F250 Super Duty.
This tonneau cover is great! It fits and looks perfect. The quality seems very good and should last a very long time.
The measurements were a little off for the gap of the tailgate and I had to readjust after install of the side rails. Also there were some cuts after pieces were painted it looked like. Unsure if this was done to adjust a common part to make work for several different bed styles or what. Still needs a few adjustments on my part but overall am happy with it.
Directions could of been a little better as well but I was able to fumble through.
I like the design of the Tonneau cover and how it looks, the ease of installation and the follow up support of etrailer. The shipping was pretty fast but there was a portion on one of the side rails that should not have passed quality control at the manufacture. I contacted etrailer, sent in a few pictures of the damaged rail and within a few days got a replacement rail shipped to me. That’s why I like doing business with etrailer!
The tonneau fit really well and worked with my Silverado. However, customer service is one star at best. I sent pictures to a representative of my truck and toolbox and she said the tonneau I picked out for him would not work with my toolbox. She then recommended another tonneau that she said was made for my toolbox and truck (I pull a fifth wheel so that made things difficult.) I ordered the one she recommended but it didn’t work either. I emailed her and nothing but crickets. I got an email from a different representative asking how things went and I explained the whole mess and again, nothing but crickets. I had to really get creative to get it to work and now it does, but it’s tricky getting in the tool box. Disappointing to say the least. I’ve ordered from etrailer before and had good experiences. This time, 5 star product, one star customer service.
After a little over a year, this tonneau cover is still working great and is a perfect fit with my crossover toolbox.
It has been a good comer. I have had no trouble out of it. It’s holding up very well.
Really happy with the tonneau cover for my 2016 F150. It was a little more difficult to install than I expected, but we finally got on. It works as advertised.
Perfect setup for bedrails and toolbox. Quick delivery.
Ryan L.
1/16/2021
Durable and no functional issues after 12 months.
Love the cover, worked very well with the toolbox I got,
Not the same as my hard cover but still very handy
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
David J.
7/27/2023
Great! I really like it.