To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Most covers don’t leave room for a truck-bed toolbox, but this one is built specifically for it. The Access Toolbox Edition Soft Roll-Up Tonneau Cover installs directly behind most 19"–21" wide, over-the-rail toolboxes and seals tightly against them. The front header bar and Element weather seal form a snug barrier that keeps rain, snow, and dirt out while still allowing full use of the toolbox lid.
Hot summers or freezing winters won’t wear this cover out. The double-coated, reinforced vinyl blocks UV rays so it won’t fade and stays flexible down to -40°F without shrinking or cracking. Black powder-coated aluminum bows support the fabric so it stays tight while you drive and rolls up smoothly when you need open-bed access.
When you close the cover, the Deluxe AutoLatch II automatically snaps two locks—one on each side—for a tight, secure seal. When you need to open it, just pull the single release cord for one-hand operation. Lock the tailgate (sold separately) and your gear stays protected under a clean, weather-resistant layer.
You can fine-tune how snug the cover fits without tools thanks to the XT-Dial adjuster up by the toolbox. Just turn the dial by hand to keep the vinyl pulled tight as temperatures change. That means no flapping at highway speeds and no sagging after rain or snow.
When it’s time to haul large gear, just roll the cover up toward the cab and secure it with the built-in straps and clips behind your toolbox. It sits 1-1/2" above the bed rails for a low, streamlined profile that even helps reduce wind drag—improving gas mileage by up to 10 percent. The contoured, black powder-coated aluminum rails resist rust and mount inside the bed rails so stake pockets stay free for racks and tie-downs.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Adam: What's going on everybody Adam here with etrailer. Today, we're going to be taking a look at the Access Toolbox Edition Soft, Roll-Up Tonneau Cover. Line of Access Tonneau Covers is going to be able to fit a wide variety of different trucks, use the etrailer fit guide to put in your year, make and model of your truck to find the exact fit for your truck bed with toolbox.You all know the many benefits to having a tonneau cover, yes, it's going to protect all the contents from all that rain and snow that you may have, also it's going to increase your fuel economy. But also the main thing for me is just to protect anything from theft, because people just have sticky fingers, but sometimes you really don't have the option, you have both a toolbox and a tunnel cover. Sometimes you really just have to pick one or the other. Well, this is the main benefit to having this tonneau cover.
We can have the lock box here, have all our tools and stuff in there and have all of our fun recreational stuff in here. And since we have a locking tailgate, everything is nice and secure.It is a very durable vinyl material and it is going to resist against the sun and all of the elements that mother nature's going to throw at it. And it's going to keep all of that water out too. And it is pretty low profile as well with the toolbox, we're losing a little bit of the rail space, but with the tonneau cover, we're not. So if you're like me and you like to talk after maybe around a golf or maybe after a long day at work, but you still have these rails to sit and relax.The Access Tonneau Cover gives you quick and easy access because all you got to do is just grab this little string here, pull that down, one hand, that's all you got to do.
And then you can go ahead and roll all this up, just like that. So you can go ahead and if you're going on a trip and you want to keep your bed open, whether you have contents in there or you just like it better that way, we have these little straps and they're just going to click right at the back of the cover on both sides and we can adjust this. I can actually roll it over one more time, maybe we can go ahead and tighten this up. It's going to hold this back on here and just grab this and bring it forward. Nice and tight.
Just like that.With the tonneau cover rolled up, we can get a closer look at our rails. So these are going to be made of an aerospace grade aluminum. So they're not going to rust away over time. And even the clamps are made of this aerospace grade aluminum, which is great. So they're not going to rust.
It's going to be easy to take on and off if you need to, but it looks good. So you don't really have to. And we do have a powder-coated finish too. So it gives a nice little look, blends in with the side rail colors on our Silverado.If you're tired of having to choose between a tonneau cover or a toolbox, etrailer has got a solution for you, the Access Tonneau Cover, it works just as well as any other soft, roll-up tonneau cover, but it just makes your truck to be able to do more. And that's something I like because trucks are made for working. And it also looks really good too.And that just about does it for our look at the Access Toolbox Edition Soft, Roll-Up Tonneau Cover. And I'm Adam with etrailer.
Ratings & Reviews
Overall, Happy with this product. Relatively easy to install, however, I recommend doing it with a partner to make it easier. Fits great with my Weather Guard toolbox and gives the truck a great look overall! Super easy to open and close and provides way more security than having the bed open for all to see.
Real nice and easy to install.
This cover is a perfect match for a tool box! It comes with everything needed to seal the front of the box and then seals for around the cover. It rolls up and the clips hold it in place as it should. The adjustment knobs make sure you will get the best fit and coverage.
Well I cannot rate the product. But UPS did a 5 star job of delivering it to my door in 5 below temps. Until it melts out there, I am not going out.
We love this tonneau cover! This is our third purchase of the same cover. We upgraded to a 2024 Dodge Ram and unfortunately needed the new fit. This is easy to install and wears extremely well. Our old tonneau cover purchased 3 years ago looks literally brand new. I am grateful that this company makes an affordable solution to covering the bed of your pickup and allowing for a toolbox as well.
I've been looking for years for a cover to fit my bed with the toolbox and all I ever heard was they don't make them. I love this cover and thanks etrailer. I was a little confused with the instructions provide, so it was a combination between the video and instructions that helped me complete the task. I really recommend if your in the market for this kind of tonneau cover.
Love my cover so much! Highly recommend!!! My cover has been all over the country from the coast of the redwoods of California to the deserts of southern Utah to the plains of Kansas for construction aiport projects my cover has protected my belongings, my truck, and myself!!! Thank you so much for an amazing product!!!
Love the way this cover looks on my truck . I see why this setup is popular with 5th wheel truck owners. I can hide the hitch from some weather elements and cover up what’s stored in the bed. My next upgrade is a lockable tailgate latch. Only 1-recommendation to the manufacturer is maybe real photos in the instructions to help installation. Other that I’m very pleased and would recommend to everyone.
Cover has lived up to expectations. Easy to install. I integrated it with a 5th wheel tool box which conveniently allows separate access to either. Protects my hitch from the elements when I am not towing. Easily rolls up and down. When rolled up, it does not block my rear view when I hitch my 5th wheel. Stays securely fastens when closed. No water intrusion, even in a car wash. Every couple of months I apply a good coating of a quality vinyl UV protectant.
Perfect fit for my 2021 3500 Silverado (8-foot bed) with a cross-bed storage box. Rolls up snug when we have the 5th wheel hooked up. Stays taught when extended and covering the truck bed. After one year I'm very Pleased with this product.
Surprised by the early delivery! Installation instructions need some help, but the product is just what I wanted for our '20 F350 DRW.
The cover fits well over the truck bed and snug against the tool box. RAM 3500 with 8' bed.
happy with the results they all where not installed yet but measured the pieces and they and were all within tolerance went to Home Depot and bought some weather stripping as the tool box (huskie) WILL HAVE TO BE FARTHER out so you can open it full without hitting the rear window and still have a water tight seal
Installed on a 2013 F150 with 6-1/2' foot bed. I had already installed a toolbox across the bed rails and then decided to add an Access cover since I knew I could get this tool box compatible version. I had an Access cover on a previous truck and knew I wanted the same brand again.
Plan on buying additional bulb weather stripping as the cap between the tool box and the front of the bed is wide depending on tool box width. My gap was wider than what came with the installation kit. You have to put the toolbox exactly where it needs to meet the bed cover header.
Installation was easy for the cover as the struggle was getting the toolbox weather stripping installed. I put the bulb seal in the kit on the front of the toolbox and then added my larger bulb weather stripping onto the front of the truck bed so that both mated up once the toolbox was put back into place per the instructions. Any local parts store should carry the seal material.
I do like how you need to open the tailgate to operate the latching system. If you lock your tailgate, it cannot be accessed. My previous Access cover had a push button you could use to unlatch the cover with the tailgate closed. Not great if you want to keep other out of your truck bed.
The measurements were a little off for the gap of the tailgate and I had to readjust after install of the side rails. Also there were some cuts after pieces were painted it looked like. Unsure if this was done to adjust a common part to make work for several different bed styles or what. Still needs a few adjustments on my part but overall am happy with it.
Directions could of been a little better as well but I was able to fumble through.
We travel a lot with our RV and frequently keep stuff in the back of the truck. I wanted something to hide it all. This cover is excellent. It looks fantastic and is easy to use (roll/unroll). Installation was okay but two sets of hands or clamps make it a lot easier. The instructions are just okay but it all worked out. The cover was a smidge short so I had to double-up on the rubber seal at the tailgate. No biggie. Also, no need to have a separate cover for my 5th wheel hitch. Very happy!
This tonneau cover is great! It fits and looks perfect. The quality seems very good and should last a very long time.
I like the design of the Tonneau cover and how it looks, the ease of installation and the follow up support of etrailer. The shipping was pretty fast but there was a portion on one of the side rails that should not have passed quality control at the manufacture. I contacted etrailer, sent in a few pictures of the damaged rail and within a few days got a replacement rail shipped to me. That’s why I like doing business with etrailer!
The tonneau fit really well and worked with my Silverado. However, customer service is one star at best. I sent pictures to a representative of my truck and toolbox and she said the tonneau I picked out for him would not work with my toolbox. She then recommended another tonneau that she said was made for my toolbox and truck (I pull a fifth wheel so that made things difficult.) I ordered the one she recommended but it didn’t work either. I emailed her and nothing but crickets. I got an email from a different representative asking how things went and I explained the whole mess and again, nothing but crickets. I had to really get creative to get it to work and now it does, but it’s tricky getting in the tool box. Disappointing to say the least. I’ve ordered from etrailer before and had good experiences. This time, 5 star product, one star customer service.
After a little over a year, this tonneau cover is still working great and is a perfect fit with my crossover toolbox.
Very happy with this cover. Went on easily and fits perfectly.
Fit perfectly! Install was easy on my sons Alex 2015 Ford F-250 , great for when he’s not towing his 2021 5th wheel ! Looks great
My cover arrived about a week early so no complaints here.
Installation went fine so just read the instructions carefully and take your time. I also watched a YouTube video which helped as well.
My only concern is there is a short section along the bed rail near the rear of the toolbox that doesn't have any sealing material (~3 inches long), so some water will likely run down the rail and into the bed. I realize the cover isn't going to be 100% waterproof but I still might run a small bead of black caulk to seal it.
The cover looks great and pretty easy to roll up when you need access to the bed. However, when pulling on the string to disengage the latches to open the cover, the string popped out of the catch on the one side. I was able to wedge it back in for now, but since the string wasn't long enough to tie an end knot I'll need to fix it later (lost one star for this one).
I can't speak to the longevity or how the cover material will weather and stretch/sag over time, but so far so good.
Wow, this Tonneau roll up bed cover is absolutely great. I like the quality of all parts, ease of installation and finally the look! Installed on my 2016 Ford F250 Super Duty.
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kate F.
2/25/2026
The Best Cover, glad we had the right fit for you, you are happy with the fit and the quality. I am happy you are happy about your purchase =)