Video Transcript for Review of Pacbrake Vehicle Suspension - Alpha HD Towing/Load Leveling Kit - PB92FV

Hello, everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the Pacbrake Alpha HD Air Bag Suspension Kit for your rear axle. This has a 5,000-pound load leveling capacity. Now, this kit is a custom-fit kit. It is designed to fit a 2001 to 2010 Chevrolet Silverado and GMC Sierra 2500HD and 3500HD trucks. Works on both 2-wheel drive and 4-wheel drive trucks.

Now, this is for all trucks, including those with 5th-wheel hitches. One note I do wanna mention, though, is it will not fit cab and chassis vehicles. And on a custom-fit part like this, I'd like to recommend for you to go to our website, use the fit guide, put in your year and model vehicle, and it'll show if this will work for your application. Now, these airbags are designed to help you stay level, drive steady, and stay in control when hauling heavy loads. This kit will include everything I have laid out here on the table.

It includes the air springs for your rear axle, the upper and lower roll plates. Also, the precision laser-cut powder-coated steel brackets. Comes with grade 5 plated hardware. Comes with the air lines with the inflation valves. And then right up here on each one, you can see the push-to-connect fittings for the air lines.

And also comes with installation instructions to show you how it all goes together. Now, when your trailer's loaded and the bed's full, your truck needs more than just the stock rear springs to stay level and in control. That's where these Alpha HD air springs will come into play. They'll add up to about 5,000 pounds of rear axle support, helping your truck stay steady and secure through heavy haul. So basically, whether you're pulling a 5th wheel, or hauling materials or towing equipment, this upgrade here is gonna keep you from sagging, squatting, and struggling for control.

Now, also, one load isn't like the next. That's why this Pacbrake will give you freedom to adjust the air pressure from 5 PSI all the way up to 100 PSI. So basically, if you need full support for a loaded trailer, just pump it up. If you're unloaded and heading home, just drop the pressure for a smoother ride. So with the simple manual inflation right out of the box, you're gonna get better ride quality and confidence no matter how much you're hauling. And again, you just start with simple manual inflation. And then if you wanna expand your system later, you can use onboard air or wireless controls. Basically, the Alpha HD system is designed to scale with your setup, making future upgrades easy without redoing the foundation. Now, I did wanna zoom in a little bit and show you that these aren't light duty gear. These Alpha HD Springs are built with 1-inch-thick end caps on each end of the spring, and they use 20 internal wires in the spring to handle extreme loads without giving in. They do use corrosion-resistant parts, roll plates for protection of the springs, and powder-coated brackets to ensure that this system will hold up through road salt, rain, mud, and even over time. Now, this is designed to bolt to factory mounting points on your truck. This air spring kit installs with no drilling required. Now, the air springs will not increase your vehicle's weight carrying capacity, but you do wanna make sure not to exceed the manufacturer's recommended weight limit. But that's gonna do it for a look at the Pacbrake Alpha HD Air Bag Suspension Kit for your rear axle.