1. Roof Rack
  2. Rhino Rack
  3. Tracks
  4. 63 Inch Track Length
Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 63" Long - Qty 2

Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 63" Long - Qty 2

Item # RTC16
lowest price pledge
Retail:$207.29
Our Price: $126.00
You Save: $81.29
Roof Rack
This item qualifies for Free Shipping
Shipping Weight: 5 lbs
Quantity: 
RTC16 - 63 Inch Track Length Rhino Rack Roof Rack
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

These tracks mount directly to your naked-roof vehicle to create strong, low-profile attachment points for Rhino-Rack roof-rack legs. Each track has dual C-channels so that you can mount the tracks to your roof and mount legs to the tracks. Lowest Prices for the best roof rack from Rhino Rack. Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 63" Long - Qty 2 part number RTC16 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (37)
  • Q & A (34)
  • Photos
  • Why etrailer?

Rhino Rack Roof Rack - RTC16

  • Tracks
  • Rhino Rack
  • 63 Inch Track Length

These tracks mount directly to your naked-roof vehicle to create strong, low-profile attachment points for Rhino-Rack roof-rack legs. Each track has dual C-channels so that you can mount the tracks to your roof and mount legs to the tracks.


Features:

  • Create strong, low-profile attachment points for Rhino-Rack RLTP, RLTF or RLT500 track-mounted legs (sold separately)
  • Allow you to easily move legs and crossbars to a new position to accommodate different-size loads
  • Mount directly to your vehicle with a naked roof - also work for camper shells and hard tonneaus
    • Tracks mount to your roof with T-bolts - drilling required
      • No holes in the tracks - T-bolts slide into the bottom C-channels of the tracks for installation
      • Included O-rings seal bolt holes in roof to prevent leakage into your vehicle
  • Have notches built into the ends of the tracks so that you can easily remove roof-rack legs and crossbars
  • Constructed of extruded aluminum with anti-corrosion coating
  • Include 4 end caps that provide finished look for the tracks


Specs:

  • Quantity: 2 tracks
  • Track dimensions: 2" wide x 1/2" tall x 63" long
  • 5-Year limited warranty


RTC16 Rhino Rack Channel Mount RTC Tracks - 63" Long - Qty 2

Installation Details RTC16 Installation instructions




Customer Reviews

Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 63" Long - Qty 2 - RTC16

Average Customer Rating:  4.6 out of 5 stars   (37 Customer Reviews)

These tracks mount directly to your naked-roof vehicle to create strong, low-profile attachment points for Rhino-Rack roof-rack legs. Each track has dual C-channels so that you can mount the tracks to your roof and mount legs to the tracks.

- RTC16
by:

Added the 63" track to my bed rails. Fairly easy installation but required some different hardware based on the application. Some areas didn't allow enough room for the knob so used washers instead with the nyloc nut from the knob. Beware the overall length is roughly 5 inches longer with the end caps (~68"). I had to cut about an inch from the rail to fit between my bull rings but knew there would be a chance of modification needed for the intended use. etrailer has great information and fast shipping.



- RTC16
by:

My previous truck topper had Yakima tracks. I kept my racks so needed new tracks on my new truck. At this time yakima and Thule tracks were all sold out so I went with this brand as they are compatible with Thule or Yakima parts. At first glance I thought they'd be more difficult to mount but it turned out they are actually easier to mount and seem really solid. Plus these can be mounted by 1 person as the bolts holding it on are t bolts slide into the track so no need for 2 people to install like the yakima trucks.



- RTC16
by:

I recently ordered two products The quality of both items were great. The bed mat fit perfect and the roof rails were just what I had expected.


Comments
The roof rack is great. It was easy to install and extremely durable
Bobby - 01/27/2020


Comments
The roof rack is great. It was easy to install and extremely durable
Bobby - 01/27/2020



- RTC16
by:

Exceptional service and follow up. Top notch!!



- RTC16
by:

After one year of owning this rack I can say that it is top quality and even through all the loading and unloading and brought terrain it has never come loose. Great product and even better customer service from etrailer.com.



- RTC16
by:

After a year, still looks brand new.



- RTC16
by:

Intuitive assembly, seemless look in my truck bed. Looks like factory installed



- RTC16
by:



- RTC16
by:



- RTC16
by:



- RTC16
by:



- RTC16
by:



- RTC16
by:



- RTC14
by:

Review from a similar RTC in Roof Rack


Custom built a mixed Rhino-Rack and Thule bike carrier. Started with the RTC tracks, added Rhino-Rack crossbars, then Thule bike carriers. Customer support was very helpful in getting compatible parts. Took some ingenuity on my part, too, but I love the way it turned out!



- RTC14
by:

Review from a similar RTC in Roof Rack


This review is given after 1 week of use. Please take it for what it is worth without knowing the long-term performance of the product. The good. The package arrived a few days after ordering without delays. All parts were properly packaged and all quantities were correct. The rails seem sturdy and the finish appears that it will hold up over time. The rails have a clean factory type look. I mounted them on the bed rails of my Jeep Gladiator. They fit nicely next to my hard tri-fold tonneau cover frame. The dimensions given online were accurate. The not so good. The descriptions online made me feel like this was a "universal" size track. It is not. It seems as though all of the major brands have proprietary T-bolt sizes. I am currently using elevator bolts that I hit with the bench grinder to hold accessories until I can find a good fit.



- RTC18
by:

Review from a similar RTC in Roof Rack


I just installed these tracks and have not used them yet. They seem pretty solid. The install took a few hours, a good part of which was building up the courage to drill 16 holes in my roof. With this set up one needs to take a little extra time on the layout, but the finished product looks nice. I gave 4 stars because the extra width of the tracks first work well for me. My top falls away slightly before the edge, so the outside edge of the track has a 1/16 to an 1/8 inch gap. I don't think it shows in the picture. I'm planning to use these with Yakima towers, but am waiting on the parts I need.



- RTC12JW
by:

Review from a similar RTC in Roof Rack


etrailer is great! This is a Rhinorack two star review. First of al the t-bolts were not long enough to reach through the topper. Secondly I received 10 bolts, 9 nuts, 6 o-rings and 8 butyl patches. Whoever is packaging the products can't perform the one task they are in charge of...counting! I would have ordered the Thule tracks had they been in stock anywhere, I will not be ordering any more products from Rhino though.



- RTC14
by:

Review from a similar RTC in Roof Rack


I mounted these rails in a non-traditional manner (on top of my truck bed caps so that I could crossbars that spanned over my existing tonneau cover). No one I talked with had actually done this type of installation before. The only problems I ran into were: 1) I had to cut the rails approximately 1/2 inch to ensure the through-bolts did not interfere with existing cap hardware, and; 2) The "Nyloc Nuts" were too wide to use so I just substituted a nut, lock washer and flat washer to compensate. Other than that, the installation took a while but came out great. And the RRRL T600 feet work perfectly with the rails. See the attached photo for the complete installation (with bikes attached) and a second photo with the rack removed by using the quick release feet.



- RTC95JW
by:

Review from a similar RTC in Roof Rack


I used one of these tracks to mount to the back of the cap on my pickup so I could mount a Rhino Rack awning. Parts and hardware seem great! Mounting instructions were clear and easy. Drilled some holes and tightened a couple bolts and I'm ready to roll.



- RTC12JW
by:

Review from a similar RTC in Roof Rack


Not real happy with this product. Rhino Rack Rails look OK, but install was challenging. Basically had to replace all installation hardware. T-bolts that hold rack to roof were too short (only 1-inch lgt.; needed 1-1/2 inch lgt.) to reach completely through roof of topper. Had to improvise with additional bolts (elevator bolts, with large diam., flat heads, new lock nuts, washers, etc. Total of $15.21 in additional hardware, plus grinding and filing heads of new elevator bolts to fit slots in the rails. Solution should hold rails on fine; but cost me extra $$ and several hours extra work. Next step is feet and crossbars.



- RTC12JW
by:

Review from a similar RTC in Roof Rack


Good quality tracks still need to install but will be ordering the racks from you soon as well.



- RTC18
by:

Review from a similar RTC in Roof Rack


Rhino-Rack Rails work great. Put them on a truck topper to work with a Rhino Rack cross rails system. Easy to install and they are secure. You will need to apply extra silicone or caulk when drilling holes through the topper as the rubber washers on the bolts don't quite stop all leaks. Don't forget that fiberglass truck toppers need to be reinforced to support extra weight.



- RTC18
by:

Review from a similar RTC in Roof Rack


Excellent design and manufacturing quality. Etrailer has installation videos on youtube. Modern fiberglas truck beds and matching caps taper toward tailgate (for rearward visibility) which means the rail/crossbar will be a trapezoid instead of a rectangle. The butyl patches are messy but effective, better to place on T-bolts and mold below o-ring instead of placing on holes in cap. The M6 T-bolt protudes past knobnut inside cap enough to thread on eyenuts for hanging cargo hammock and whatever. Was pricey to get 71” rails with 59” crossbars, had to order separately, not sure why the price penalty since all parts pull from Colorado under different skus anyway.



- RTC14
by:

Review from a similar RTC in Roof Rack


The price is right, and the product appears generally well-engineered. I'd be reluctant to label it as "heavy duty" however (as Rhino does), since they are made of extruded aluminum, and each tower is mounted by just two small square washers gripping the rails. Although the mounting hardware itself is sturdy stainless steel, I question the sturdiness of the rails themselves under a heavy load. Unfortunately, the competition likewise only makes aluminum rails, so the industry as a whole appears to have a very different concept of sturdy than I do. (I could have sworn they are described as steel when I ordered them, but I may be wrong about that).



- RTC12JW
by:

Review from a similar RTC in Roof Rack


I installed the Rhino rails, and really like them. The install was easy, and the rail are low profile, and have almost no wind resistance. The instructions that came with them are for a Jeep TJ, but I have a JK, and didn't notice until I started drilling and hit a metal cross member. They work fine on a JK, but make your own measurements so the holes don't go into cross members. I also had to temporarily lower the speaker bar so I could put the hold-down nuts on.


31
44
Show More Reviews

Ask the Experts about this Rhino Rack Roof Rack

  • Attaching Rhino-Rack RTC-Style Roof Rack Tracks To Bed Rail Of 2019 Tacoma With A 5 Foot Bed
    The Rhino-Rack RTC-Style Roof Rack Tracks # RTC16 are meant to be mounted on the roof of a camper shell, but I see no reason why you couldn't mount them to the bed rails of your 2019 Toyota Tacoma. The only problem I see is that you have a 5 ft bed and the rails are 63 inches long. You will have to trim these tracks to match the length of your bed. In regards of the installation. It will come with all the hardware you need to install correctly. The only other part of the system that...
    view full answer...
  • Which Yakima Landing Pad Mount Kit Fits in Rhino Rack Roof Rack Channel like # RTC16
    Yes, we have test fit the Yakima Landing pad # Y00221 in a Rhino Rack channel like the part # RTC16 that you referenced and we found they fit perfectly. Since the RTV and RTC channel dimensions are the same that would mean that the Landing Pad fits both.
    view full answer...
  • Will the Rhino Rack Tracks Work with Yakima Control Towers and What Is the Length of Mounting Bolts
    The 63 inch Rhino Rack RTC Style Roof Rack Tracks, # RTC16, come with 8 T-bolts for each track, 16 total, and each T-bolt measures 1 inch long. Although manufacturers typically do not recommend using another company's towers on their track, I went to our warehouse and pulled a set of the RT Style Rhino Roof Tracks and the Yakima Landing Pad1, #Y00221 to perform a test fit to ensure compatibility. All parts performed just as they should so yes, the Rhino Rack RTC Style Tracks will work...
    view full answer...
    Image 1 for
  • Rhino Rack Track Compatibility With Thule Track Feet
    The Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount like # RTC16 will work with the Thule Tracker II feet. The Rhino-Rack Tracks are the same size as the Thule tracks.
    view full answer...
  • Can I Cut The Rhino Rack RTC Track Down To The Size I Need and Available Lengths Of Track
    Yes, the 63" Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount part # RTC16 can be cut down to the size you need as long as you cut them perfectly straight to allow the end caps to go back on because at this time we do not carry them as a replacement part. The tracks are available in different lengths as well. Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/4" Long # RRRTC8JWMY11 Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/2" Long # RTC8JW Rhino-Rack RTC-Style Roof Rack Tracks -...
    view full answer...
  • Will the Rhino Rack RTC-Style Roof Rack Tracks fit on ATC Camper Shell?
    Congrats on your new truck purchase! If I'm understanding you correctly, you're asking whether or not your RhinoRack # RTC16 Roof rack is going to be compatible with both trucks- the answer depends on the length of the new truck's ATC camper shell. As long as you've got 63" to mount the tracks for the RTC system on your new camper shell, you'll be able to transfer it to the new truck without any issues. If you don't have quite that much space on your new camper shell, and can provide...
    view full answer...
  • Can Rhino-Rack RTC-Style Roof Rack Tracks Install at an Angle?
    The Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 do need to lay flat. There cannot be an angle because that would cause an undue amount of stress on your camper shell, the tracks, and the legs. To safely and effectively use the rack you are going to need to do it so the tracks are laid down flat or they could very easily snap off or come apart because they'll be constantly flexed.
    view full answer...
  • Parts Needed to Adapt Yakima Crossbars to a Rhino Rack 63 inch Rail System
    Though manufacturers tend to recommend against using another company's towers on their track, there are occasional fits for cross-brand uses. In this case, you'll be able to use the Yakima LaunchPad 1, part # Y00221, in the Rhino Rack 63 inch rail, part # RTC16. I've included a picture of the two working in perfect harmony with each other. These pads include caps for when the rails are not in use to protect the inner workings of the LaunchPads. From there, you'll just need a set...
    view full answer...
    Image 1 for
  • Roof Rack System for ATC Truck Bed Caps
    According to my research, the ATC truck bed caps used Rhino-Rack RTC-Style Roof Rack Tracks like part # RTC16. Therefore, I recommend taking a look at the Heavy-Duty Crossbar System part # RLTP-2 and part # RB1500B-2. The heavy-duty cross bars have a 220 lb weight capacity which is far superior to other rooftop mounted crossbars. However, the increased weight capacity means the crossbar is physically bigger which limits the amount of available accessories that can be attached to them.
    view full answer...
    Image 1 for
  • Recommended Tracks to Install on Leer 700 Fiberglass Tonneau Cover
    The Rhino-Rack RTC-Style Roof Rack Tracks like the 63" # RTC16 are perfect for hard fiberglass tonneau covers like your Leer 700. For a complete kit that also includes the mounting feet and crossbars I recommend the Rhino-Rack # Y02-490B. Once the crossbars are in place the door is pretty wide open when it comes to compatible accessories. Just about any roof-mount accessory from Thule and Yakima will fit the Vortex Crossbars from the above-mentioned kit, such as the excellent Thule...
    view full answer...
  • Would Thule Tracker Fit Kits Fit in Rhino Rack Track RTC15
    Although it's never been tested yes, the Thule Tracker Fit Kits would fit in the track part # RTC16 as the Thule also uses track nuts that are 3/4 inches wide like the Yakima towers.
    view full answer...
  • No-Drill Roof Rack Recommendation for 2018 Chevrolet Silverado 1500 Quad Cab
    We have roof racks like the Yakima CoreBar rack part numbers # Y00422, # Y00146, and # Y06122 which are a confirmed fit for your 2018 Chevy Silverado 1500 quad cab and do not require drilling into the roof at all. This rack actually clamps around the top of the door frame and does not require any permanent modification.
    view full answer...
  • Hobie Outback Kayak Roof Top Carrier for a 2018 Ford F-250 Crew Cab With Short Bed Camper Shell
    With the weight of your Hobie Outback Kayaks being between 85 and 103lbs from the factory you will want to use the a Rhino-Rack setup. It is rated for 209lbs versus the 165 that the Yakima is capable of holding. For your 2018 Ford F-250 you will need 2 sets of the Rhino-Rack RTC-Style Roof Rack Tracks # RTC16. One set for the cab of your F-250 and one set for your Leer camper shell. Next you will want Track Mount RLTF Legs # RLTF. You will need one set for each Rhino-Rack Heavy-Duty...
    view full answer...
  • Can the Rhino-Rack RTC-Style Roof Rack Tracks Part # RTC16 be Installed at an Angle
    The Rhino-Rack RTC-Style Roof Rack Tracks part # RTC16 will need to be installed on a flat surface. If the tracks are not installed on a flat level surface then the tracks will rock and pivot back and forth creating a weak point in the water seals. If the tracks pivot then the crossbars will not attach to the mounting feet. You will want to use the Track Mount Legs for Rhino-Rack part # RLTP, part # RLTF, or part # RLT500 for this track system in addition to a crossbar that is compatible...
    view full answer...
  • How To Mount Rhino Rack Heavy Duty Cross Bars On A 2002 VW Eurovan
    There is not a compatible foot to mount the Rhino Rack heavy duty bars to your 2002 VW Eurovan. Since it is a naked roof you would have to mount a channel mount Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 63" Long - Qty 2 Item # RTC16 to the roof and use the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall - Qty 4 Item # RLTP-2 to mount your heavy duty bars. Installing the tracks do require drilling holes into the roof for the hardware.
    view full answer...
  • Ladder Rack and Tonneau Cover Recommendation for 2016 Ford F-150 5-1/2 ft Bed
    For your 2016 Ford F-150 5-1/2 foot bed the BAK Revolver X2 part # BAK39329 is a fit and can be installed with a ladder rack but there's only one ladder rack that is compatible. We can't recommend trying to modify the Rhino Rack RTC rack you mentioned. The ladder rack you'd need is the Thule TracRac SR part # TH43002XT-508. The reason these two fit together is because the TracRac installs by mounting through the top of the bed rails through the stake pockets and the BAK mounts to the...
    view full answer...
  • Correct Rhino Rack RTC Style Track System For A 2016 Chevrolet Silverado 1500
    If you're wanting to put these tracks # RTC16 on your 2016 Chevrolet Silverado, you can get these legs # RLTP that will fit into the tracks. These will work with the Rhino Rack Heavy Duty Crossbars # RB1650B-2.
    view full answer...
  • Recommended Rhino-Rack Complete Roof Rack System for Snug Top Truck Camper Shell Bed Cap
    Rhino-Rack does have a complete kit with shorter crossbars that still have the tracks for your truck cap. It is the Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars - Track Mount - Black - 54" Long # Y02-480B. If you want shorter bars than that, there is not a kit but you can create the same thing with individual parts. You can use the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 63" Long - Qty 2 # RTC16, the legs # RRRLT600, and then add the bar length you desire. You...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Tracks for Camper Shell Compatible with Prinsu Toprac System
    The Rhino-Rack RTC-Style Roof Rack Tracks will work with the Camper shell to give you the compatible tracks. There are different lengths available and you can cut them down if needed: Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/4" Long # RRRTC8JWMY11 Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/2" Long # RTC8JW Rhino-Rack RTC-Style Roof Rack Tracks - 37-1/2" Long # RTC95JW Rhino-Rack RTC-Style Roof Rack Tracks - 47-1/4" Long # RTC12JW Rhino-Rack RTC-Style Roof Rack Tracks -...
    view full answer...
    Image 1 for
  • Availability of Rhino-Rack Roof Rack System w/ 71" Heavy-Duty Square Crossbars
    I can definitely help you with the same type of setup as part # Y01-140B but currently there aren't any kits that use the 71" Rhino-Rack Heavy Duty crossbars. The parts that you will need are the Rhino-Rack 71" Heavy-Duty Roof Rack Crossbars # RB1800B-2, the Quick Mount Legs # RRRLT600, and the RTC-Style Roof Rack Tracks # RTC16.
    view full answer...
  • 2015 Jeep Wrangler Roof Rack with Rhino Rack Vortex RLT600 for Rhino-Rack 2 Kayak Carrier
    The Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 are designed to fit the tracks like # RTC16. Another popular option is to use the backbone roof mounting system for Jeep Wrangler hard tops # RRRJKB2 and rubber bases # RRQMFK06. Then you will simply use crossbars like the 59 inch # RRVA150B-2 to complete the roof rack. This complete system will allow you to use most roof accessories like the 2 Kayak Carrier # S512 and RRS512X....
    view full answer...
  • Parts Needed to Add Single Rhino-Rack HD Roof Rack to 2006 GMC Sierra to Match Camper Shell Rack
    We can get your 2006 GMC Sierra extended cab set up with the matching 65 inch HD crossbar that come with the # Y01-140B system for your camper shell. To make it work the parts will need to be pieced out, but by adding each of them it will allow you to add the track-mounted rack system for your camper shell and a single-bar rack with a matching HD crossbar. The exact parts you will need to make this work for your '06 Sierra are the following: - Rhino-Rack Heavy-Duty Roof Rack Crossbars...
    view full answer...
  • Does the Rhino-Rack Aero Bar Roof Rack for Camper Shells Come with 70"+ Crossbars
    The Rhino-Rack Aero Bar Roof Rack for Camper Shells have a max crossbar length of 59", part # Y02-490B when purchased as a kit. That said, you can make your own kit like the above using any crossbar length you want. I have attached parts for you below. Rhino-Rack RTC-Style Roof Rack Tracks part # RTC16 Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars part # RRRLT600 Rhino-Rack Vortex Aero Crossbars part # RRVA180B-2 Please note, the bottom of the crossbars are slotted so you'll...
    view full answer...
  • Is the RTC Track Included with the Rhino-Rack Roof Rack System w/ 2 Heavy-Duty Square Crossbars
    The Rhino-Rack Roof Rack System # Y01-140B is comprised of the following parts: 65" Heavy Duty Bars - # RB1650B-2 Quick Mount Legs - # RRRLT600 63" RTC Tracks - # RTC16 So everything you need for a complete roof rack is included in the Roof Rack System # Y01-140B. You can see this on display in the attached photo a customer sent in. If you let me know what you plan on using the roof rack for I can make additional recommendations as necessary.
    view full answer...
    Image 1 for
  • How to Use Yakima Round Crossbars with a Set of Rhino-Rack RTC-Style Roof Rack Tracks
    There are adapters for the Rhino-Rack Quick Mount Legs part # RRRLT600 that will allow you to use square crossbars but not round crossbars. If you can tell me what you are trying to do or what you have/need I would be happy to see if we have any other options for you.
    view full answer...
  • Rhino-Rack Roof Rack System That Will Fit 66 Inch Wide Truck Bed
    We do have a solution for you that will work with your 66 inch wide truck bed, but the 65" crossbars of the Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars - Track Mount # Y02-500B will not be long enough to fit the width of your truck's 66" bed. Instead, what you can do is purchase the parts of this roof rack individually, along with longer crossbars. What you need is the following: - Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 63" Long # RTC16 - Rhino-Rack Quick...
    view full answer...
  • Can Rhino-Rack Vortex Aero Crossbars Be Cut to Size
    It is possible to cut the Rhino-Rack crossbars but I do not recommend this as it will certainly void the warranty. Since we offer Rhino-Rack's Vortex Aero bars in various lengths you can simply choose the individual parts you prefer to make up your rack in the dimensions you prefer. Since you want to end up with bars that are about 44-inches long I suggest part # RRVA118S-2. This is a set of silver Vortex Aero bars that come in that 44-inch size. With these you can use the 63-inch tracks...
    view full answer...
  • Availability of Roof Rack Crossbars for Use on 2015 Jayco Pop-Up Camper With Factory Side Rails
    To date Thule has not developed any custom-fit roof rack crossbars for use on specific campers. My contact at Thule did confirm that he knows of no plans to develop a custom-fit rack system to fit your Jayco's roof rails. It is likely that at least for the short-term only Jayco will offer crossbars intended for the side rails installed on their campers. We do, however, offer free-standing camper roof rack systems. An example is the SportRack # SR1020 (SportRack is part of the Thule...
    view full answer...
  • Soft Tonneau Cover and Sliding Bed Rail Tracks for 2018 Ford F-150 Short Bed
    We have exactly what you need to add a soft roll-up tonneau cover and sliding tracks to the 5-1/2 foot bed of your 2018 Ford F-150. For this I recommend a combination of the Access Vanish Tonneau Cover # A91369 and the Rhino-Rack Roof Rack System # Y02-500B. The Access Vanish is a really sleek tonneau cover that features a trigger latch design that automatically engages when the cover is closed and a reinforced vinyl flap at the rear to further prevent water and dirt from getting inside...
    view full answer...

Do you have a question about this Roof Rack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality roof rack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate roof rack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Tyler C
Written by:
Tyler C
Employee DeAnne T
Updated by:
DeAnne T
Employee Adele M
Updated by:
Adele M
Employee Daron K
Updated by:
Daron K
Employee Isabelle B
Updated by:
Isabelle B
Employee Jameson C
Expert Research:
Jameson C
Employee Chris R
Video by:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.