bing tracking image
  1. Roof Rack
  2. Rhino Rack
  3. Tracks
  4. 47-1/5 Inch Track Length
Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 47-1/4" Long - Qty 2
10% Money Back Rebate on Rhino Rack Products

Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 47-1/4" Long - Qty 2

Item # RTC12JW
lowest price pledge
Retail:$148.03
Our Price: $133.00
You Save: $15.03
Roof Rack

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 4 lbs
Quantity: 
In Stock
Instant Rebate
Roof Rack RTC12JW - 47-1/5 Inch Track Length - Rhino Rack
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
These tracks mount directly to your naked-roof vehicle to create strong, low-profile attachment points for Rhino-Rack roof-rack legs. Each track has dual C-channels so that you can mount the tracks to your roof and mount legs to the tracks. Lowest Prices for the best roof rack from Rhino Rack. Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 47-1/4" Long - Qty 2 part number RTC12JW can be ordered online at etrailer.com or call 1-833-496-1390 for expert service.
  • All Info
  • Reviews (77)
  • Q & A (0)
  • Photos
  • Why etrailer?

Rhino Rack Roof Rack - RTC12JW

  • Tracks
  • Rhino Rack
  • 47-1/5 Inch Track Length

These tracks mount directly to your naked-roof vehicle to create strong, low-profile attachment points for Rhino-Rack roof-rack legs. Each track has dual C-channels so that you can mount the tracks to your roof and mount legs to the tracks.


Features:

  • Create strong, low-profile attachment points for Rhino-Rack RLTP, RLTF, RLT500, or RLT600 track-mounted legs (sold separately)
  • Allow you to easily move legs and crossbars to a new position to accommodate different-size loads
  • Mount directly to your vehicle with a naked roof - also work for camper shells and hard tonneaus
    • Tracks mount to your roof with T-bolts - drilling required
      • No holes in the tracks - T-bolts slide into the bottom C-channels of the tracks for installation
      • Included O-rings seal bolt holes in roof to prevent leakage into your vehicle
  • Have notches built into the ends of the tracks so that you can easily remove roof-rack legs and crossbars
  • Constructed of extruded aluminum with anti-corrosion coating
  • Include 4 end caps that provide finished look for the tracks


Specs:

  • Quantity: 2 tracks
  • Track dimensions: 2" wide x 1/2" tall x 47-1/4" long
  • 5-Year limited warranty


RTC12JW Rhino Rack Channel Mount RTC Tracks - 47-1/4" Long - Qty 2

Installation Details RTC12JW Installation instructions




Customer Reviews

Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 47-1/4" Long - Qty 2 - RTC12JW

Average Customer Rating:  4.6 out of 5 stars   (77 Customer Reviews)

These tracks mount directly to your naked-roof vehicle to create strong, low-profile attachment points for Rhino-Rack roof-rack legs. Each track has dual C-channels so that you can mount the tracks to your roof and mount legs to the tracks.

by:

install was easy and quick. Needed help only to tighten the bolts down. My Yakima Towers fit right into these slots and now I can use my old Yakima gear carry my ladder and kayak or bikes on my truck cap using equipment I already had.




by:

etrailer is great! This is a Rhinorack two star review. First of al the t-bolts were not long enough to reach through the topper. Secondly I received 10 bolts, 9 nuts, 6 o-rings and 8 butyl patches. Whoever is packaging the products can't perform the one task they are in charge of...counting! I would have ordered the Thule tracks had they been in stock anywhere, I will not be ordering any more products from Rhino though.




by:

ALways great service and. communication




by:
Jeep

Etrailer had this shipped and pa lager with all parts and delivered early. I could not find this size with anyone else perfect for your 2 door Jeep hardtop. Thank you for making the process so easy




by:


Not real happy with this product.

Rhino
Rack Rails look OK, but install was challenging. Basically had to replace all installation hardware.

T-bolts that hold rack to roof were too short (only 1-inch lgt.; needed 1-1/2 inch lgt.) to reach completely through roof of topper. Had to improvise with additional bolts (elevator bolts, with large diam., flat heads, new lock nuts, washers, etc. Total of $15.21 in additional hardware, plus grinding and filing heads of new elevator bolts to fit slots in the rails. Solution should hold rails on fine; but cost me extra $$ and several hours extra work.

Next step is feet and crossbars.




by:

Good quality tracks still need to install but will be ordering the racks from you soon as well.




by:
Jeep TJ

I installed the Rhino rails, and really like them. The install was easy, and the rail are low profile, and have almost no wind resistance.

The instructions that came with them are for a Jeep TJ, but I have a JK, and didn't notice until I started drilling and hit a metal cross member. They work fine on a JK, but make your own measurements so the holes don't go into cross members.

I also had to temporarily lower the speaker bar so I could put the hold-down nuts on.




by:
2019 Nissan Titan




by:




by:

Review from a similar RTC in Roof Rack


Custom built a mixed Rhino-Rack and Thule bike carrier. Started with the RTC tracks, added Rhino-Rack crossbars, then Thule bike carriers. Customer support was very helpful in getting compatible parts. Took some ingenuity on my part, too, but I love the way it turned out!


Comments
Works great!
Marc - 04/23/2022


by:

Review from a similar RTC in Roof Rack


Rhino tracks are great - I installed on my truck topper per the great instructions that were included (see photos). The tracks flexed to meet the contours of my topper. All bolts are hidden by track and were long enough to go through topper where special knobbed nuts are used to secure. Total install took about three hours.

etrailer customer service came through to resolve several challenges on this order:
- I initially ordered Yakima tracks. There were long shipping times, so etrailer recommended different compatible tracks from Rhino that were $40 cheaper!
- the initial shipment had not arrived in nearly three weeks with no USPS shipping updates. etrailer sent a second set of tracks via a different shipper that arrived in a few days.
- unfortunately the replacement tracks were incorrect - too long and endcaps were missing.
- while eTrailer was arranging to resend the endcaps, the original USPS order arrived with the correct tracks and all parts.
- eTrailer had me keep the correct tracks and parts, and send me a label to ship the incorrect tracks back to them.

All of these interactions were made with very professional and friendly customer service staff. I felt like I was a valued customer!




by:

Review from a similar RTC in Roof Rack


Overall pleased with the product. The rails were solid and I was able to shorten them for my application. My only complaint is the rubber gaskets could be a little easier to apply as mine were somewhat melted in the box. Installation was not difficult assuming you can measure and take your time. I mounted some Yakima landing pads on them with Yakima feet and bars.




by:

Review from a similar RTC in Roof Rack


First of all, it turned out pretty well.

However,
after the tracks arrived in distressed packing (see photo), I worried I'd need to return and start over, but fortunately, the contents of the package were undamaged. Then, since the holes for the T-bolts to secure the tracks required a 6.5mm drill, I had to order one before starting the installation process. Another $x for the two drills. Then carefully measuring and double checking that there was clearance underneath for attaching the knobs, and then I triple checked the measurements again. The most important one is the 15mm measure from the ends of the tracks for the first T-bolt at each end of the tracks. The other holes are not as critical since you are able to slide the T-bolts in the track to align with its corresponding hole. I did add a bit of silicone on the holes for extra leak prevention. Probably, unnecessary. At first I thought these tracks could have been a bit longer for my camper shell on a 5' bed, however once installed, they look pretty good (see photos). Now, if I'm able to install roof basket that attaches with my new tracks, I'll be very happy.




by:

Review from a similar RTC in Roof Rack


I wanted to use my Rhino-Rack bars and accessories, although I did not want a bed cover on my new RAM 2500. So I mounted these Roof Rack Tracks directly to the bed rails. They fit perfectly, I only had to separate the nyloc nuts from the plastic knobs which did not fit under the rail.




by:

Review from a similar RTC in Roof Rack


Very well packed and supported. Follow up was also good. The extrusion looks a bit thin, but otherwise well made.




by:

Review from a similar RTC in Roof Rack


I just installed these tracks and have not used them yet. They seem pretty solid. The install took a few hours, a good part of which was building up the courage to drill 16 holes in my roof.

With this set up one needs to take a little extra time on the layout, but the finished product looks nice.

I gave 4 stars because the extra width of the tracks first work well for me. My top falls away slightly before the edge, so the outside edge of the track has a 1/16 to an 1/8 inch gap. I don't think it shows in the picture.

I'm planning to use these with Yakima towers, but am waiting on the parts I need.




by:

Review from a similar RTC in Roof Rack


Added the 63" track to my bed rails. Fairly easy installation but required some different hardware based on the application. Some areas didn't allow enough room for the knob so used washers instead with the nyloc nut from the knob. Beware the overall length is roughly 5 inches longer with the end caps (~68"). I had to cut about an inch from the rail to fit between my bull rings but knew there would be a chance of modification needed for the intended use. etrailer has great information and fast shipping.




by:

Review from a similar RTC in Roof Rack


Roof rack tracks are great and easy to install. The instructions provided online help and are very detailed. The tracks are of sturdy aluminum. These tracks helped with installation of my Uptop Roof rack.




by:

Review from a similar RTC in Roof Rack


I was very happy with these bars at first. But over this past year it seems the adhesive stripping on the bottom will slide off causing the tracks to become uneven. Concerns were raised with the manufacturer but they were not helpful or kind, Would not replace stripping or track.




by:

Review from a similar RTC in Roof Rack


I mounted these rails in a non-traditional manner (on top of my truck bed caps so that I could crossbars that spanned over my existing tonneau cover). No one I talked with had actually done this type of installation before. The only problems I ran into were: 1) I had to cut the rails approximately 1/2 inch to ensure the through-bolts did not interfere with existing cap hardware, and; 2) The "Nyloc Nuts" were too wide to use so I just substituted a nut, lock washer and flat washer to compensate. Other than that, the installation took a while but came out great. And the RRRL T600 feet work perfectly with the rails. See the attached photo for the complete installation (with bikes attached) and a second photo with the rack removed by using the quick release feet.




by:

Review from a similar RTC in Roof Rack


Received tracks and hardware but no end caps.


Comments
I will have our Customer Service team reach out to you.
-- Etrailer Expert Jenny N - 05/31/2022


by:

Review from a similar RTC in Roof Rack


Good quality product and looks better than the higher priced Yakima and Thule




by:

Review from a similar RTC in Roof Rack


Very solid made. I installed them on my fiberglass camper shell by myself. It took about 1.5 hours. Very straightforward instructions




by:

Review from a similar RTC in Roof Rack


This review is given after 1 week of use. Please take it for what it is worth without knowing the long-term performance of the product.

The good.
The package arrived a few days after ordering without delays.
All parts were properly packaged and all quantities were correct.
The rails seem sturdy and the finish appears that it will hold up over time.
The rails have a clean factory type look. I mounted them on the bed rails of my Jeep Gladiator.
They fit nicely next to my hard tri-fold tonneau cover frame.
The dimensions given online were accurate.

The not so good.
The descriptions online made me feel like this was a "universal" size track. It is not. It seems as though all of the major brands have proprietary T-bolt sizes. I am currently using elevator bolts that I hit with the bench grinder to hold accessories until I can find a good fit.




by:

Review from a similar RTC in Roof Rack


My previous truck topper had Yakima tracks. I kept my racks so needed new tracks on my new truck. At this time yakima and Thule tracks were all sold out so I went with this brand as they are compatible with Thule or Yakima parts.
At first glance I thought they'd be more difficult to mount but it turned out they are actually easier to mount and seem really solid.
Plus these can be mounted by 1 person as the bolts holding it on are t bolts slide into the track so no need for 2 people to install like the yakima trucks.



25
77
Show More Reviews

See what our Experts say about this Rhino Rack Roof Rack



  • Will the Rhino-Rack RTC-Style Roof Rack Tracks Work with a Fiberglass Shell
    The Rhino-Rack RTC-Style Roof Rack Tracks, part # RTC12JW, are in fact designed to mount to camper shells with fiberglass. If you're looking for a full fitment, we have the Heavy-Duty Bar Roof Rack for Camper Shells, part # RTC12JW. It is a confirmed fit for your 2016 Chevrolet Silverado 1500.
    view full answer...
  • Channel Length for 47-1/4 Inch Rhino-Rack RTC-Style Roof Rack Tracks
    The 47-1/4" length of the Rhino-Rack RTC-Style Roof Rack Tracks # RTC12JW is the channel itself and doesn't include the end caps. There aren't any restrictions to the length you cut off - I would just make sure you can properly secure the track with however much you would like to cut off.
    view full answer...
  • Can Rhino-Rack RTC-Style Roof Rack Tracks be Cut to Length
    Yes, you can cut the Rhino-Rack RTC-style tracks to the needed length without voiding the warranty. The RTC-style tracks are available in a number of different lengths: - 71" Long: Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount # RTC18 - 63" Long: Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount # RTC16 - 55" Long: Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount # RTC18 - 47-1/4" Long: Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount # RTC12JW - 37-1/2" Long:...
    view full answer...
  • Recommended Tracks for Camper Shell Compatible with Prinsu Toprac System
    The Rhino-Rack RTC-Style Roof Rack Tracks will work with the Camper shell to give you the compatible tracks. There are different lengths available and you can cut them down if needed: Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/4" Long # RRRTC8JWMY11 Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/2" Long # RTC8JW Rhino-Rack RTC-Style Roof Rack Tracks - 37-1/2" Long # RTC95JW Rhino-Rack RTC-Style Roof Rack Tracks - 47-1/4" Long # RTC12JW Rhino-Rack RTC-Style Roof Rack Tracks - 55" Long...
    view full answer...
    Image 1 for
  • Can I Cut The Rhino Rack RTC Track Down To The Size I Need and Available Lengths Of Track
    Yes, the 63" Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount part # RTC16 can be cut down to the size you need as long as you cut them perfectly straight to allow the end caps to go back on because at this time we do not carry them as a replacement part. The tracks are available in different lengths as well. Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/4" Long # RRRTC8JWMY11 Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/2" Long # RTC8JW Rhino-Rack RTC-Style Roof Rack Tracks - 37-1/2"...
    view full answer...
  • Additional Height Added to Roof with Rhino Rack Vortex Bars and RTC Tracks and RLT600 Feet
    The added height when installing a Rhino Rack Vortex crossbar # RRVA150B-2, # RLT600, with RTC tracks like the # RTC12JW would be right at 4-3/4 inches.
    view full answer...
  • Yakima Landing Pad 1 And Compatible Roof Rack Tracks
    The Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2, part # Y00221, is not only compatible with the Yakima Tracks. They are also compatible with the following tracks, any Rhino Rack RTC-Style Roof Rack Tracks - Channel Mount, part # RTC12JW, and the Thule Top Rack Tracks, part # THTP42. Please remember, the Yakima Landing Pad 1 comes in pairs. You will need to sets for your roof rack. I have included product description links. a video installation link, and a link to roof...
    view full answer...
  • Recommendation For Adding A Stock Looking Roof Rack To A 2022 Kia Sportage
    I do have an option to add a more permanent roof rack to your 2022 Kia Sportage, but it will require drilling into the roof and will not be a factory set up. With that said and if you are ok with doing this, or having someone do it for you, you can go with something like the Rhino-Rack RTC-Style Roof Rack Tracks # RTC12JW. I couldn't find the dimensions of your roof, so these being 47-1/4" long may be the correct ones, but you may need shorter ones as well, which we do have if needed....
    view full answer...
  • Can Rhino-Rack Vortex Aero Crossbars Be Cut to Size
    It is possible to cut the Rhino-Rack crossbars but I do not recommend this as it will certainly void the warranty. Since we offer Rhino-Rack's Vortex Aero bars in various lengths you can simply choose the individual parts you prefer to make up your rack in the dimensions you prefer. Since you want to end up with bars that are about 44-inches long I suggest part # RRVA118S-2. This is a set of silver Vortex Aero bars that come in that 44-inch size. With these you can use the 63-inch tracks...
    view full answer...
  • Can Thule Roof Racks Fit into Rhino Rack RTC Roof Channel Tracks
    Yes the Thule roof racks can install in the Rhino Rark RTC channels like part # RTC12JW. You'll need the fit kit part # THKIT3101, the feet # TH460R, and # TH712500 for a 60 inch bar setup.
    view full answer...
  • Do I Need a Pre-Existing Track to Install the Rhino-Rack Roof Rack for Factory Tracks?
    The Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 54" Long # Y02-480B-NT does require installed tracks in order to fit on your truck cap. It is not possible to drill the feet onto the roof. For the tracks, I recommend the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 47-1/4" Long - Qty 2 # RTC12JW. The great thing about having tracks is that you can move your crossbars to different positions on your truck cap in order to accommodate different size...
    view full answer...
  • Roof Rack for 2004 Jeep Wrangler Hardtop Without Rain Gutters
    While I can understand not wanting to drill into your 2004 Jeep Wrangler, the only way to add a roof rack and crossbars is by adding tracks, which attach to your Jeep's top by bolting on. While this is not drilling, it does require adding small holes to the roof, though those holes are sealed with O-rings that come with the kit, so there won't be any leakage in your Jeep's roof. If you would like to do this, you can use the following parts for your 2004 Jeep Wrangler hardtop: - Rhino-Rack...
    view full answer...
  • Rhino Rack Tracks Yakima Tower Compatibility
    The Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 47-1/4" Long - Qty 2, part # RTC12JW, will work with Yakima towers. The towers you need are Yakima's SkyLine Towers. Right now we only have them available them in pairs. You will need two sets of SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Side Rails, Track Systems, part # Y00152, two sets of Landing Pad 1 for Yakima SkyLine and Control Towers, part # Y00221, and one set of RoundBar SL Adapter for Yakima...
    view full answer...
  • Rhino-Rack Over the Bed Rack Shorter Tracks and Longer Bars
    The 63" Rhino-Rack RTC-style roof rack tracks that come with the Rhino-Rack Roof rack part # Y02-500B-ST can be cut down to the size that you need them as long as you cut them perfectly straight to allow the end caps to go back on. If you don't want to cut them, I recommend to use either a 55" Long track # RTC14 or 47-1/4" Long # RTC12JW. To use longer cross bars with the shorter tracks, you will need Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks part...
    view full answer...
  • What Length Rhino Rack Roof Rack Crossbars Fit 2006 Jeep Wrangler
    Thank you for noting the different roof rack fit information between our site and the Rhino-Rack site. I checked with my technical contact at Rhino-Rack and it was confirmed that you are in fact correct - 59-inch crossbars are indeed specified for your 2006 Wrangler. We will be updating our fit information - thanks again for your keen eye. The 49-inch Vortex bar rack we specify - consisting of parts # RRVA126B-2, # RLTP-2 and # RTC12JW - does fit your Wrangler but the 59-inch Vortex bars...
    view full answer...
  • Will the SeaSucker Ski and Snowboard Carrier Fit on My 2001 Jeep Wranger with Textured Hard Top?
    I reached out to my contact at SeaSucker, and he said that as long as the surface on your 2001 Jeep Wrangler is non porous and relatively smooth (not too abrasive), the SeaSucker Ski and Snowboard Carrier - Vacuum Cup Mounted - 4 Pairs of Skis or 4 Boards 298-SK2420 should mount to your roof. However, they confirmed that they have not tested the carrier on that specific model of Wrangler. If you want an alternative option that will definitely work, you can setup a roof rack system and...
    view full answer...
  • 2008 Toyota Tacoma Fitment with Rhino-Rack Track Roof Rack System
    You can either cut down the 63" long tracks that come with the Rhino-Rack Aero Bar Roof Rack for Camper Shells # Y02-480B to fit your 2008 Toyota Tacoma OR you can purchase the 47-1/4" long Rhino-Rack Tracks # RTC12JW and get the 54" Vortex crossbars and legs separately as part # Y02-480B-NT. This isn't as cost-effective but it does keep you from having to mess with cutting the tracks if you know the 47-1/4" length will work for your application.
    view full answer...
  • Roof Rack Recommendation for a 2013 Honda Odyssey
    For a roof rack that is a fit for your 2013 Honda Odyssey with the roof style you have you would want the Rhino Rack that consists of part numbers # RRVA137S-2, # RLTP-2, # RTC12JW, and # RRVA-FK2-2 which is a confirmed fit. You will need to do some minor drilling to install the included track so that the feet of the kit will fit it.
    view full answer...
  • Recommended Roof Rack For 1999 Jeep Wrangler Sport Hard Top Compatible with Thule Roof Cargo Basket
    The Thule Canyon XT Roof Cargo Basket - Steel - 49" x 40" x 6" - 150 lbs, Item # TH859XT is compatible with most roof racks as long as the cross bars are between 20 inches and 37 inches apart when measured center to center . To get the most cost efficient system that will support this rack and give you the spacing necessary, I recommend the Rhino Rack Roof Rack consisting of: Rhino-Rack Vortex Aero Crossbars - Aluminum - Silver - 59" Long - Qty 2 # RRVA150S-2 Rhino-Rack Quick Mount Legs...
    view full answer...
  • Parts Needed To Install Rhino-Rack Pioneer Platform Rack RR67QX On Leer 100XL Camper Shell
    If the Leer 100XL Camper Shell on your 2007 Ford F-150 SuperCrew with the 5-1/2' bed does not already have tracks installed you will need the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 47-1/4" Long - Qty 2 # RTC12JW for the Rhino-Rack Pioneer Platform Rack for Camper Shells - Track Mount - 60" Long x 49" Wide # RR67QX to install to. You will want to check with Leer to find the carrying capacity of your Camper Shell and use the lower rating between platform rack and the shell. Most...
    view full answer...
  • Will the Rhino-Rack Roof Rack # Y02-480B Work to Haul a 12-Ft. Kayak on a 2019 Toyota Tundra?
    Yes, the Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - Standard - 54" Long # Y02-480B will safely transport a 12-ft. kayak as long as you have either a carrier or some other source of fastening method to transport the kayak while on your 2019 Toyota Tundra Crew Max. I recommend the Rhino-Rack J-Style Kayak Carrier - Fixed - Universal Mount # S510. The J-Style kayak carrier comes with 2 specially designed tie-down straps that attach your kayak to the crossbars...
    view full answer...
  • Rhino Rack Roof Rack that Could Fit 2017 Toyota Tacoma
    The channels of the Rhino Rack RTC roof rack tracks part # RTC12JW would accept a Thule roof rack fit kit part # THKIT3101 and could be made to fit the roof of your 2017 Toyota Tacoma but a custom fit rack for your Tacoma would be a better option since it wouldn't require drilling like the Rhino Rack Vortex Roof Rack part numbers # RRVA126B-2, # RRRLT600, and # RRQMFK08-2.
    view full answer...
  • What Clips Can I Use with My Rhino-Rack Vortex Aero Crossbars on My 2018 Ford F-350?
    While we do have a solution for you, Rhino-Rack does not make clips to use on your 2018 Ford F-350 Super Duty with a bare roof. This is because clips are engineered specifically to match the contours of your roof/door jambs. Unfortunately, you cannot use any other manufacturer's clips on the bottom of your Rhino-Rack legs because each manufacturer makes different clips that are designed only for their products. With that being said, there are 2 options. The first option is to use your...
    view full answer...
    Image 1 for Image 2 for
  • Can I Use the Rhino-Rack Roof Rack # Y02-480B-NT on My 2015 Scion xB?
    I have a great alternative for you. In order to use the Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 54" Long # Y02-480B-NT, you will need a track system like the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 47-1/4" Long - Qty 2 # RTC12JW. We normally do not suggest this combination because the RTC-Style Roof Rack Tracks require you to drill into the roof of your vehicle in order to install. For an alternative option that does not require drilling...
    view full answer...


< Previous
12



Do you have a question about this Roof Rack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality roof rack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate roof rack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Tyler C
Written by:
Tyler C
Employee DeAnne T
Updated by:
DeAnne T
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Daron K
Updated by:
Daron K
Employee Alex H
Updated by:
Alex H
Employee Isabelle B
Updated by:
Isabelle B
Employee Noah M
Updated by:
Noah M
Employee Jameson C
Expert Research:
Jameson C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.