Phoenix Faucets RV Faucets - PF231561

The pull-down spout on this kitchen faucet rinses all that tough food residue off your plates and then self-retracts with the adjustable hose weight. Maintenance-free ceramic disc cartridge helps prevent the faucet from dripping and wasting water.

Features:

• Faucet lets you replace or upgrade the kitchen faucet in your RV or camper
• Pull-down head with stream and spray options makes it easy to get food off your dishes
  • Hose weight adjusts anywhere along the spray hose and enables the spout to self-retract
• Single, lever-style handle has a maintenance-free ceramic disc cartridge
  • Discs create a watertight seal when faucet is turned off to prevent dripping
• Durable, lead-free hybrid construction with a rubbed bronze finish
  • Molded underbody is made of durable plastic
  • ABS plastic components are powder coated with metal
  • Brass inlet shank has polymer lining that helps resist corrosion
• 1-Hole or 3-hole installation with included 2 deck plates, braided water lines, and mounting hardware
  • Requires tile and tub caulk (sold separately)
• ADA compliant

Specs:

• Flow rate: 2.2 gallons per minute
• Overall dimensions: 2-5/8" wide x 15-3/4" tall x 10-1/2" deep
• Base dimensions:
  • Round base: 2-5/8" diameter
  • Oval base: 10" wide x 2-3/8" deep
• Spout length: 9"
• Distance from mounting points to aerator: 9-1/2"
• Distance from countertop to aerator: 8"
• Inlet shanks:
  • Diameter: 1-5/16"
  • Length: 2-1/2"
• Water supply line size: 1/2" male pipe thread
• 1-Year warranty

Pull-Down Spout Makes It Easier to Clean

Pull the spout down so you can easily tackle that food caked onto your plates or rinse the sides of the sink from any angle. Toggle between the stream and spray options depending on how much pressure you need or how long that food has been sitting there. When you're done using it, the spout self-retracts with a hose weight that can be adjusted anywhere along the spray hose.

How to Install a Kitchen Faucet

Depending on your setup, you'll need either the round deck plate for a 1-hole installation or the oval deck plate for a 3-hole installation. To install, use the brass inlet shank and drop the new faucet and a deck plate in place of your existing faucet. Then tighten the mounting nut onto the shank with the included tool so that the washer is in between the nut and the underside of the counter. Finally, install the hose weight, thread the pull-down head's hose onto the faucet's center inlet, and connect the braided hot and cold water lines. You'll need to keep some tub and tile caulk (not included) on hand to help prevent any leaking.

PF231561 Phoenix Faucets RV Kitchen Faucet with Sprayer - Single Lever Handle - Hybrid - Rubbed Bronze

Alternate part number: SP3105-08-03i