Sleek RV bathroom faucet has 1/4-turn stems that prevent leaks. Low-flow aerator conserves your water supply while you're dry camping by reducing the flow of water without compromising water pressure. Includes mounting hardware.
Features:
Specs:
To install, use the inlet shanks to drop the new faucet in place of your existing faucet. Then tighten the included mounting nuts against the underside of the counter, and connect the hot and cold water lines. You'll need to keep some tub and tile caulk (not included) on hand to help prevent any leaking.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Phoenix Faucets Catalina RV bathroom faucet, with the dual lever handles and a nice rubbed bronze finish.This Catalina series faucet will let you upgrade your bathroom faucet in your RV or camper. It is a dual handle design, with the lever style handles. What's nice is they use a quarter turn cartridge stem, which enables the faucet to fully turn on and off with just a quarter of a turn. And they are a washer less design, so it does reduce friction in daily wear for long lasting durability. Right here on the spout it uses a low flow aerator to reduce the flow of the water to help conserve your water supply. The whole faucet is a non metallic, abs plastic construction.
It uses a spin welded, celcon thermoplastic underbody, and again has a nice rubbed bronze finish to provide a nice sleek look.This is a two hole and three hole installation. The inlet shanks, right here, have standard male NPSM connections. It does include the two mounting nuts and the two rubber washes to help when you go to install this. Now, it does also require some tile and tub caulk, which is not included. We sell that separately.
Flow rate on this faucet is one point two gallons per minute.I'll give you a few dimensions on this. Overall dimension, with the handles in this position, the widest point edge to edge on the handle, is going to be right at nine and a half inches wide. The depth on it, from the bottom of the base to the top of the handle, is going to be three and a half inches tall. Total depth from the back of the base to the spout, the end of the spout, is going to be right at six inches. And the spout itself, to the front of the base, is going to be right at four inches for the spout length.
Now the base itself, overall width edge to edge, is six and a quarter inches wide. Depth on it is right at two and three eighths inches deep. These inlet shanks, the distance between them, are your standard center to center four inch measurement. And the length of the inlet shanks are right at two inches long.But that should do it for the review on the Phoenix Faucets Catalina RV Bathroom Faucet, dual lever handles, and a nice rubbed bronze finish.
great service
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.