This gooseneck design puts the water farther into the sink, and the single lever gives you control in one motion. It updates the space with a taller profile and square design that gives you room to actually use the sink without working around it.
The gooseneck spout pushes the water stream farther out into the sink instead of keeping it near the base. This gives you more usable space when rinsing dishes or filling cookware. You can work in the sink without constantly shifting things around to reach the flow.
Temperature and flow adjust through one lever instead of separate handles. The ceramic disc cartridge controls the mix internally, so changes happen in a single movement. You can move from off to the temperature you want without stepping through multiple adjustments.
The ceramic disc cartridge seals at the control point instead of relying on flexible seals that wear out. This creates a watertight seal when the faucet is turned off. When you shut it down, the flow stops and stays off, so you are not coming back to a slow drip in the sink.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone, Steven here with etrailer. Today we're taking a look together at this B & B Molders square style RV kitchen faucet. It's a single lever handle design and a satin nickel finish. So folks, this is a great option to whether you're replacing an old outdated, worn out, dirty maybe, or you just wanna upgrade, this is a great option for you and it's gonna work good in your kitchen, RV, camper or whatnot. It is a single lever style handle, so obviously you got hot and cold. Those are actually etched into the side here, H and C.
And then of course you have this long spout that's gonna come out and give you decent height. So I do like to start off with measurements just to give you a lot of confidence that you're gonna get something that's gonna work for you. From the deck here to the top, 13 and a quarter inches, and then center of the spout to center of the spout out, right at about eight and a quarter inches on center. And then if you look under here, it's a pretty simple installation. You have a set ring with some set screws and then a couple of washers, one metallic, one rubber, and then of course you have your standard half inch male pipe thread, braided lines for your wash supply.
You got one with red hash marks and one with blue hash marks, hot and cold obviously. So it doesn't get simpler than that really. And as far as installation, you will need sold separately some tile and tub caulk. That's recommended by the manufacturer anytime you're doing faucets and those kind of things where you have water present. This does have built inside of here a disc that's gonna create a nice watertight seal.
So whenever you shut it off, you don't have to worry about drips and those kind of things. And it is a maintenance free ceramic disc cartridge that's inside of there. And then obviously if you need to turn the spout, you can turn it pretty much whichever direction you want. Traditionally, it's pretty much installed with this lever on the right hand side if you're looking at it, but you could certainly install the opposite way if you want to, it's totally up to you. Just follow the instructions and make sure you're doing what you need to do as far as keeping everything installed correctly.
That's gonna wrap up our quick look together folks. I'm Steven, thanks so much for your time. Thanks for watching and have a great day.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.