Video Transcript for Complete Breakdown of the Universal Door Bumper

Ellen: Hey, everyone. I'm Ellen here at etrailer.com. And today we're going to be taking a quick look at the Universal Door Bumper. This is going to help to be a doorstop, so you're not going to let the handle of the door bang, and cause any issues, or any damage to your walls. Helps to protect your interior as well as the door handle. It keeps everything a little bit safer and neater for the inside of your RV.It's just going to be this kind of conical shaped door bumper.

It is a plastic construction, so it is fairly rigid, should be easier on the wall and the door, then that those two banging together. It comes with two screws, you really only need one to get this installed. Just put that screw down through the tube and get it to line up with the hole at the bottom, which might be a little easier with a screwdriver, but it should. There we go, drop down in there.And then you can just mount that to your wall with a Phillips Head Screwdriver. As far as the size of the bumper itself, it's about two and three quarter inches long from top to bottom.

And then the base, it's three quarters of an inch in diameter. Two and three quarter inch long, and then three quarters at the base. The very tip of it is about five-eights in diameter. Our screws are about one and a half inches long.Again, you get two of those. If one happens to run away on you while you're trying to get it installed, you at least have a backup.

It does have a lifetime warranty from JR Products, and that's pretty much all there is to it for our Universal Door Bumper. I hope this video has been helpful in the setting of this is going to be the right part for you. If not, we do have other options available here at etrailer.com. So check them out. Thanks for watching..