bing tracking image
  1. RV Awning
  2. Solera
  3. Slide-Out Awnings
  4. 11 Feet Wide
  5. White
  6. 128 Inch Wide
  7. 129 Inch Wide
  8. 130 Inch Wide
  9. 131 Inch Wide
  10. 132 Inch Wide
  11. 133 Inch Wide
Solera RV Slide-Out Awning - 133" Wide - White
Solera

Solera RV Slide-Out Awning - 133" Wide - White

Part Number: LCV000163295
In Stock
$578.70
RV Awning
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Protect your RV slide-out from debris and keep moisture out of your siding to prevent water damage and mildew with this slide topper awning. Made for slide-outs that measure up to 11'1" from edge to edge. Includes all necessary components. Great Prices for the best rv awning from Solera. Solera RV Slide-Out Awning - 133" Wide - White part number LCV000163295 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (1449)
  • Q & A (0)
  • Photos

Solera RV Awning - LCV000163295

Highlights

  • Keeps Rain and Debris Off Your Slide-Out: Prevents water pooling and mildew that can lead to interior damage.
  • Extends and Retracts Automatically: Moves in sync with your slide-out so you never have to roll it manually.
  • Fabric Stands Strong Against the Weather: Premium 13.5-oz vinyl with heat-welded seams won’t crack down to -25°F.
  • Shades and Cools Your RV Interior: Blocks direct sunlight to help maintain lower interior temperatures.
  • Simple Two-Person Installation: Mounts with included brackets, hardware, and 133" awning rail for quick setup.
  • Fits 128"–133" Wide Slide-Outs: Provides 48" extension coverage with 7" side clearance for proper fit.
Made in USA

Features to know about

Keeps Water and Debris Out: Automatic Slide-Out Protection

This Solera slide-out awning shields your slide room from leaves, dirt, and pooling water so your seals stay clean and dry when you retract the slide. It automatically extends and retracts with the slide, giving you full coverage every time without needing to climb up and sweep debris off. By keeping moisture out, it helps prevent mildew and long-term water damage that can form on unprotected seams.

Built to Last Outdoors: 13.5-oz Vinyl with Heat-Welded Seams

The heavy-duty, 13.5-oz vinyl fabric is tough enough for year-round exposure. It’s cold-crack tested down to -25°F, so it won’t stiffen or split in freezing weather. The heat-welded seams block leaks better than stitching, giving you a long-lasting barrier against rain and UV wear.

Easy DIY Setup: All Mounting Hardware Included

Installation is straightforward using the included brackets, hardware, and awning rail. The roller tube comes pre-assembled with the fabric, and the awning rail mounts up to 5" above the trim. It’s designed for a simple two-person install that can be done in an afternoon with basic tools.

Sized Right for 128"–133" Slide-Outs: Full 48" Extension

This model fits slide-outs measuring 128" to 133" wide with a 48" projection for complete roof coverage. The awning rail itself is 133" long, giving you about 2" of overhang on each side when you’re at the smaller end of the range. Just make sure you have at least 7" of clearance on both sides, or go down to the next size for a proper fit.

Clean, Seamless Look: White Fabric and Hardware

The white vinyl fabric matches the white hardware for a clean, consistent appearance when the awning is extended or retracted. It blends with most RV exteriors while providing the shade and protection that keeps your living space cooler and more comfortable.

Specs

Application

  • Application: slide-outs 128" - 133" wide with 48" extension
  • Minimum clearance required: 7" on both sides of the slide-out (order next size down if needed)
  • Clearance required for two slide-outs next to each other: 14" total between them

Diagram showing how to measure RV slide-out width from outer trim edge to outer trim edge for selecting correct Solera slide topper size

Dimensions

  • Awning rail length: 133"
  • Awning fabric (when fully extended): 133" wide x 48" long
  • Bolt hole diameter: 3/16"
  • Mounting bracket dimensions: see below

Warranty

  • Warranty: 1-Year

Diagram showing mounting bracket dimensions

V000163295 Lippert Solera 11'1" Slider (Slide-Topper) in White w/ White Hardware

Installation Details LCV000163295 Installation instructions



Customer Satisfaction Score:

Ratings & Reviews

4.5

1449 reviews
5 Stars
(1095)
4 Stars
(186)
3 Stars
(55)
2 Stars
(37)
1 Star
(76)
Review Sort Icon
by:
The product is Great, easy install, But the Best part of this transaction was the Fast help with questions from George and Bridget, you both get a+++ rating from me .
Thank You
Les Brown
Les B. profile picture

Les B.

8/22/2018

After a year the product is working just as it should, Thanks George.

by:
Delivered in perfect condition. Easy to install. Makes a huge difference in looks and keeping cool
by:
Will wait till better weather to install/ Seller communication has been great, and shipping was prompt. Thanks.
by:
Appears to be a well built awning. Very easy to install. Not sure about durability but we plan to test it out soon.
by:
by:
The slide-out awnings were easy to install. One issue I encountered was with one of the set screws. There was excess paint in the threaded hole. I cleaned the threads with a tap and it worked fine.
Russell profile picture

Russell

7/21/2026

I have been using my slide awnings for a year now without any issues. I dont have to worry about sticks and pine cones getting on top of my slide outs. It keeps me from having to climb on top of the RV. I highly recommend these to everyone I see.

Christopher H. profile picture
Etrailer Expert

Christopher H.

7/21/2026

@Russell Happy to hear the # LCV000165063 is holding up well for you! Thanks for the recommendations and we hope you having a good summer.
Christopher H. profile picture
Etrailer Expert

Christopher H.

7/21/2026

@Russell Happy to hear the # LCV000165063 is working well for you! Hope you're having a great summer.
by:
I received the 121" awning a few months in delay, but this was not etrailer's fault. They kept in constant contact with me and I appreciate that. The awning came on an 18 wheeler and the extruded channel had been bent slightly, but easily fixable. The hardware pack was good and wrapped up nicely. Overall, a great purchase and easy to install like 2 hours with a friend. Watch the video for the installation tips it's very helpful. Definitely worth it!
Brooke M. profile picture
Etrailer Expert

Brooke M.

5/20/2025

It looks like you nailed it with the install! I'm in "aw"ning, haha. Do you have any install tips you learned when you put on the awning?

Scott profile picture

Scott

5/20/2025

@BrookeM Have two tall ladders a good friend and a 12 pack of your favorite beverage. Also, make sure you have square bits for the hardware. It's not sent with #2 Phillips screws. Other than that, a straight forward install! Watch the video...helps a ton!
Brooke M. profile picture
Etrailer Expert

Brooke M.

5/22/2025

@Scott Haha I like that advice! Thanks, Scott. Enjoy your Memorial Day weekend! :)
Scott profile picture

Scott

5/20/2026

Still working great..keeps my slide out roof clean.

James D. profile picture
Etrailer Expert

James D.

5/20/2026

@Scott love to hear things like this, appreciate your reply and choosing etrailer!
by:
Perfect addition to our 2025 Lance Squire 1995. Took less than an hour for me to prep and mount the brackets and less than an hour for my son and I to mount the awning and clean up.
Robin H. profile picture
Etrailer Expert

Robin H.

10/7/2026

Thanks for the pictures and video, looks great!

by:
The solera slide toppers are the best! Mounting is very easy, just make sure to have two people with you. I did a 67" myself, but it was difficult feeding it into the track.
Lazer S. profile picture
Etrailer Expert

Lazer S.

3/24/2026

Glad you like it! And having more than one person is definitely a good idea. These things get pretty long and awkward. What did you install this on?

by:
Product is as expected. The product was received with scratches on the metal mounting brackets. This is disappointing since the brackets are 100% visible. I will try some wax to hide or diminish unsightliness. Improved packaging suggested. Directions for install were acceptable and there were online resources.
Barbara profile picture

Barbara

10/19/2026

Product is functionally working great. Paint and wax were required to diminish visible scratches.

Jameson C. profile picture
Etrailer Expert

Jameson C.

10/19/2026

@Barbara great to hear!
by:
Purchased this for our new 2025 Winnebego 2108DB trailer as a self install. Installation was very easy, easy enough I could install it almost completely without help. I did need a helper when fitting the roller into the brackets. Included instructions were clear and easy to follow. Since this is a new install, I can't comment on the durability of this accessory, but time will tell, it looks like it's of good quality.
Thomas profile picture

Thomas

6/30/2026

After a year of use, the slide topper awning still looks and works great. Youd never know it wasnt a factory install. So far, no signs the Arizona sun is deteriorating the fabric, although I try to treat it with 303 Protectant, and keep the trailer covered when not in use. Still very happy with my purchase.

by:
Fairly simple to install if you have a decent amount of handyman skills. Instructions could be better. Love how they turned out. Little insurance for my slide outs. Hope they last.
Lazer S. profile picture
Etrailer Expert

Lazer S.

10/21/2025

I think you are selling yourself a little short, Michael. Install looks like it was done by the manufacturer! Great job! Any more trips planned for the year?

Michael profile picture

Michael

10/21/2025

@LazerS Thank you for the kind words. I would have done better if it was someone else’s! I will be heading to the Lonestar Motorcycle Rally in a couple weeks.
by:
Delivery went well, slight damage to tube, contents were fine. Install was pretty simple, following video from etrailer. Very pleased with quality of topper n look of it on our Camper which is a 2021 Keystone Passport. I've ordered a few things from etrailer n haven't ever had an issue.
Michael profile picture

Michael

5/7/2025

Couldnt be happier with slide out topper. Keeping waterdebri off slide out, protecting seal which was the goal. Not one issue with item, working great after 1 yr n probably for years to come.

by:
Great product. Easy to install.
Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

4/30/2026

Looks great, Joel!

by:
I went camping to find in the morning that our slide topper had come apart in the middle. We have only a few trips out with it. This is clearly a part that was not glued properly or the glue failed and allowed the material to slide out in the middle. Really disappointed!
by:
Only complaint is the shipping tube lost one metal end and other end was all bent up. Need better ends for shipping tube. By this the awning end paint was scratched up! Lucky I didn’t lose any parts on the opened end of tube!
by:
Worst customer service ever. It took 6 different people to correct etrailer’s mistake even having to explain over and over their own part numbers they managed to get it wrong, they shipped me multiple different parts that were incorrect parts over and over. I finally order the proper parts from a different vendor who got it right the very first time. You will later be inundated with dozens of requests to “tell us how we did” well, etrailer did a crap job and are over priced too. They never stop harassing you to do reviews either
by:
I have been completely satisfied with the support I receive from etrailer. I always get online to browse the catalog for what I need and then call Will to verify what I intend to order. He expertly walks me through the pros and cons of what I am getting and how that affects my needs. I am always pleasantly surprised by the variety and volume of parts and equipment that is available for anything from my equipment trailers to my camper.
Brooke M. profile picture
Etrailer Expert

Brooke M.

5/23/2025

That is fantastic, Dan! So glad Will has been able to help you out. Camper looks awesome. Do you have any Memorial Day Weekend plans?

by:
Excellent Customer Service…Excellent product
by:
While we love the slide out on our travel trailer, that is nothing but a potential problem. Leaves and debris lay on top and eventually prevent a good seal when closed, water pooling and potential leaking...and the list goes on.

We made the decision to buy and self install the Solera Slide Topper. The topper arrived in a large, well packed cardboard tube. All parts were present. It took my wife and I about 1:45 minutes to complete the installation. We are super pleased with how it turned out and have no complaints at all. Once again...eTrailer to the rescue!

I will note a couple of things that buyers/installers need to be aware of. While none of these are a deal breaker...knowledge is power. Some of the hardware (screws) are not painted black. After installation, I took a can of black spray paint and sprayed a little in a paper cup and used a Q-tip to apply the paint to the unpainted heads. The other thing is the tension. Wow...that is one strong spring! I found that the tension was so tight that it actually prevented the top of the slide out from fully extending. I knew this because before installing it I actually felt how tight the inside seal was against the interior wall when the slide was out. After the install I could easily slip my fingers between the inside trailer wall and the slideout seal. I ended up unwinding the spring by two full turns. After that, the slideout seal was firm against the interior wall! Yea! The awning itself was still very taunt and without sag.

A word of caution about removing the spring keeper pin or unwinding the arm. Make sure you FULLY understand what you are doing. That is NOT something you want to mess up on. While we had no problems in doing this...I am familiar with spring loaded rotational forces and understand the instant damage they can do!

Very pleased...and would highly recommend this product to anyone looking for an inexpensive way to cover and protect your slide out!
Travis profile picture

Travis

1/4/2020

Our slide-out awning is still functioning perfectly. Since I had loosened the tension a bit I was concerned about it maintaining good tension over time. No problem. Still perfect! There is no noted degradation of the canopy or hardware. Thanks!

by:
A friend and I installed this topper today on a Winnebago 2101DS travel trailer. It took a little over one hour and we didn't run into any real problems. One thing the instructions said to do was to mount the hex aluminum bar in the end bracket using a self tapping 1/4-20 screw. Seemed almost impossible to do so I used a 1/4-20 tap. Worked fine.
Once the slide topper is squared away and goes in and out properly the paper instructions want you to install a black self tapping screw in the fabric slot within 1" of the end of the fabric. I didn't like the idea of running the screw through the fabric. I had some black tubing from another project which I used for the block to keep the slide fabric from moving.
The topper seems to be high quality and certainly will provide additional protection from the elements. This is definitely a two man job and my friend was great help. When we were sliding the fabric into the slide topper rail we found the best way was for me to be on the roof supporting the topper while my friend guided the fabric into the rail slot.
Ken S. profile picture

Ken S.

11/2/2018

I assume it has been working well but I dont know since we traded the trailer for a larger one last April.

by:
After searching the internet and checking reviews I chose etrailer for my slide out awning. I have shopped at Camping World who had the same awning but a lower price. After contacting etrailer with their price match I got the awning plus a few dollars less shipped to my door! Communications were excellent!
The installation was straight forward with ample instructions. The mounting brackets for the slide out has two positions, an upper and lower to provide clearance between the roll and top of the slide out. I used the upper. Hardware was great quality. There is ample adjustments in the brackets side to side if needed. My trailer a 2020 Aspen Trail 2750BH has the “C” rail as part of the gutter so I didn’t need to install the one provided with the awning! My wife and I installed the awning with two ladders and did not have any problems. Make sure and use the silicone spray as it really makes the awning easy to slide thru the C channel. We are happy with our purchase and will definitely use etrailer for our needs! Thank you for a quality product!
Edward profile picture

Edward

6/14/2021

Very pleased with our awing! We go camping once a month and have used it many times since we installed it. Still looking good, no sun fade or any other problems. It is a quality product! etrailer is my go to source! Never disappointed!

by:
The awning design is poor and does not work as indicated. The fabric is weak and Water builds up in a pool causing unnecessary weight on the slide out. Would definitely would not buy again!
by:
After a year the product I purchased and installed has been wonderful. As you can see from the picture(s) it is still in great shape and protects our camper slide.
Topper was easy to install for a DYI and the assistance of video on installation prep and advice from etrailer was the ticket to successfully completing the job with no trouble.
Topper material is quality material and hardware was very good. Love the results and no issues with anything falling on the top of my slide increasing the risk of damage to slide and or seals.
Arthur profile picture

Arthur

7/14/2019

Topper still going strong after many camping trips since installation. No issues to talk about. Topper is doing the job it is intended to do. Very satisfied.

by:
Slide topper, rail, and hardware arrived with no damage. LCI installation instructions were somewhat vague. installation videos help. I would suggest the instructions add directions to pre-drill all holes in the unit. and display which way the rail should be installed, and whether you line the rail up on top or bottom of the 3" mark. First time I installed slide topper it took 2.5hrs with another persons help sliding in place. All in all installation went fairly smooth.
Brian profile picture

Brian

6/2/2021

Still functioning great,cycled probably 100 times, no issues,

25
1449
true
Show More Reviews

See what our Experts say about this Solera RV Awning

  • Recommended Slide Out Awnings with Hardware Based on Measurements
    For your 111 inch slide out including flange, I recommend the Solera 10' Slider (Slide-Topper) in Black w/ Black Hardware # LCV000251461 that is confirmed to fit. This is also available in white # LCV000163292. For your 132 inch slide out including flange, I recommend the Solera 11.5' Slider (Slide-Topper) in Black w/ Black Hardware # LCV000184673. This is also a confirmed fit and is also available in white # LCV000163295.
    view full answer...
  • Correct Solera RV Slide-Out Awning Measurements
    Hello, sorry for any confusion. For determining the proper size Solera Slider your project requires you need to measure the total width of your slide room from the outside including the flange then add a minimum of 5" (2-1/2" each for the left/right side overhang). Yes you can have greater than 2-1/2" overhang if you want, such as the 3" stated, it is just suggested that you do not go any less in width. For the Solera RV Slide-Out Awning - 6'7" Wide - 48" Projection - White, # LCV000163285,...
    view full answer...
  • Correct Slide Topper Awnings for Jayco Eagle HT 312BHOK
    The correct slide topper awnings for a Jayco Eagle HT 312BHOK are as follows: Solera RV Slide-Out Awning - 11'1" Wide part # LCV000163295 Solera RV Slide-Out Awning - 7'1" Wide part # LCV000163287
    view full answer...
  • Correct Slide Topper Awning for a 131" Slide Out
    The correct slide topper awning for a 131" slide out (flange to flange) is the Solera RV Slide-Out Awning part # LCV000184673 for black or part # LCV000163295 for white.
    view full answer...
  • Replacement Solera RV Slide Topper for 127-1/4 Flange to Flange Box Width
    For a box width of 127-1/4 inches, the 11-1/2 foot Solera Slide-Topper # LCV000163295 (white) or # LCV000184673 (black) is what you need. The box width is measured on the front, outside edge of outside edge, including the T-molding as shown in the attached photo.
    view full answer...
    Image 1 for
  • Slide Out Toppers for Slide Outs Measuring 128" and 145"
    As long as the measurements you provided are taken from the outside of the flange to the outside of the flange on your slide out(s) then then following are the correct white slide out toppers for your travel trailer. 127-5/16": Solera RV Slide-Out Awning # LCV000163295 144-3/4": Solera RV Slide-Out Awning # LCV000163298 These are both white slide outs and come with the brackets, hardware, and awning rail needed for installation.
    view full answer...
  • Recommended Slide Toppers For 87-3/4, 130-3/4, and 154-1/2 Slide Outs On 2017 Montana 5th Wheel
    I'd be happy to help! For your 2017 Montana 5th Wheel you'll need the following slide-topper awnings: 87-3/4" Slide out: # LCV000163288 for white or # LCV000168106 for black 130-3/4" Slide out: # LCV000163295 for white or # LCV000184673 for black 154-1/2" Slide out: # LCV000163300 for white or # LCV000168109 for black Butyl Tape # 362BT-18x1-50 You'll need to make sure you have at least 5" of clearance on each side for each slide out to make sure there is no interference with anything....
    view full answer...
  • Correct Slide Topper Awning for a Slide Out 132-1/2 Wide Flange to Flange
    The correct slide topper awning for your trailer with a flange to flange measurement of 132-1/2" is going to be the Solera 11.5' Slide-Topper Awning part # LCV000184673 for black or part # LCV000163295 for white. These awnings both come with everything you need for installation save for tools and the detailed instructions make things much easier as well. The systems are made right here in the USA and come with a one year warranty.
    view full answer...
  • Slide Toper For 2020 Sierra 321RL
    Ideally when you put a slide topper on, you would have a couple inches of overhang on the right and left sides. However, in your case, there just is not room for that. To have a slide topper you will have to buy one that is a little smaller than your slide. This means that instead of having a topper that is a couple inches bigger on each side - you will have a topper that is a couple inches too small on both sides. Most RV'ers will say that a slightly smaller topper is far better than...
    view full answer...
  • Solera Slide-Topper for 132 Inch Box Width
    If you measured a box width on your slide-out (outside front of the box including flange) of 132 inches then you will need the Solera 11.5' Slide-Topper, which comes in Black w/ Black Hardware # LCV000184673 or White w/ White Hardware # LCV000163295. I have attached a really good installation video that you can check out as well.
    view full answer...
  • Slide Topper that Fits 132.5 inch Slide Out
    Yes we do have slide toppers that fit if the slide out is 132.5 inches like with the part # LCV000184673 for black or part # LCV000163295 for white.
    view full answer...
  • Which is the Correct Size of Slide-Topper to Fit a 128 Inch Box
    You need the 11-1/2 foot Soler Slide-Topper # LCV000163295 (white) or # LCV000184673 (black). It's designed to fit a box that measures 128 to 133-3/4 inches including the flanges.
    view full answer...
  • Recommended Solera RV Slide-Out Awning for 129" Slide-Out
    If your RV slide-out is 129" as measured from flange to flange on the outside, I suggest the Solera RV Slide-Out Awning - 11'1" Wide - 48" Projection, # LCV000163295 for white and # LCV000184673 for black. This will provide the ideal approximate 2" overhang right and left.
    view full answer...
  • Solera Slide Out Topper Options for 145 Inch and 127.5 Inch Slide Outs
    If those measurements are from flange to flange then yes, you will need to add 5" overall (2-1/2" for each side) to make sure the awning is the correct size. For your 145" slide outs you need one of the following: White - # LCV000163299 Black - # LCV000165061 For your 127.5" slide out you need one of the following: White - # LCV000163295 Black - # LCV000184673 Attached is a review video for you to check out.
    view full answer...

Do you have a question about this RV Awning?


Info for this part was:

Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Chelsea B
Updated by:
Chelsea B
Employee Shelly K
Updated by:
Shelly K
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Mike S
Updated by:
Mike S
Employee Michael B
Updated by:
Michael B
Employee Isabelle B
Updated by:
Isabelle B
Employee Manda E
Updated by:
Manda E
Employee Amanda K
Updated by:
Amanda K
Employee Kristen H
Written by:
Kristen H
Employee Shane H
Installed by:
Shane H
Employee Jonathan Y
Video by:
Jonathan Y
Employee Ryan G
Video by:
Ryan G
Employee David F
Test Fit:
David F
Employee Ethan H
Test Fit:
Ethan H

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.