Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This vent makes it easy to control exactly where your air goes. The dampers rotate a full 360 degrees and can be opened or closed with just a finger push. You can fine-tune airflow to keep things cool, direct it away from a seating area, or close it off completely when not in use.
It’s built for straightforward installation in 5" duct openings, whether in a wall or ceiling. The included bezel mounts cleanly, and the vent snaps right into place. With overall dimensions of 6-7/8" diameter x 7/8" deep and a 5-13/16" mounting diameter, it’s a drop-in fit for most 5" setups.
Once installed, the dampers snap over the top to hide the screws for a smooth, finished appearance. This covered design keeps the vent looking neat and blends in with other interior fixtures instead of showing exposed hardware.
Made from sturdy white plastic, this vent holds up well through daily use and temperature changes. It stays solid over time and keeps its clean color to match standard interior trim.
With a shallow 7/8" depth, this vent fits easily where space is limited. Whether it’s overhead or on a sidewall, it sits flush and doesn’t stick out, keeping the space streamlined and tidy.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
What's up everybody. It's AJ with etrailer.com. Today, we're gonna be checking out this Valterra vent register. So it's for heating and cooling. So you can direct the air where you want it to go in your rig. Now, this is also gonna be a 6 7/8 diameter application.
So just make sure that matches what you got in your rig so that you can install it too. Let's check it out. The vents operate really easily. You can just push in on the dampers to get them to move. It's a little stiff when you first get it, but that's okay.
It's better than being loose and not staying in place like it should. And then you can also grab the damper and rotate to get that direction you want as well. So just be careful when you're going to move it. Don't pull out too hard or anything. It slides pretty easily to get it whatever direction you need it to be.
This is gonna be an example of a fixed vent. So you can see, I can't move the dampers either way and it's kind of splitting the air. Now you can rotate it a little bit here in its spot but that's not a lot of adjustability. Another great thing about controlling the air flows, you can shut it off too, so you can close the dampers if you don't wanna waste any air in that spot. I've seen a lot of comments online.
People hooking one of these up into their fifth wheel and they actually close them closer to the AC unit. So say that's at the back of the rig. That way the cold air actually gets up to the front where they need it to go. So you don't waste that cold air right there next to the a AC unit. You can just control that flow to get it to go a little bit further by just closing these vents up. So you got the initial part that you're gonna install first and that has the screws in it that holds it in place. And this is what snaps into it. So what's nice about this is the bevel here on the outside actually covers up the screws. So it looks like a nice clean install when you pop it into place. It's gonna come in two pieces, really easy to install, check out how we did it. Went ahead and removed the old vent and that one had three screws, which we we're lucky that it matches up with the pattern on our bevel here. Now we're gonna add it into place. So we just wanna match that up right there and add our screws. Go ahead and use the existing holes if they line up. If they don't, you can make new ones too, but I'm just gonna use the ones we got and run these screws back in. I'll push our vent portion up right there. Let it snap into place really easy. And now we can open up the dampers. We can even rotate this inside to get the air flowing exactly where you want it to go. Overall, an easy fix. I like it much better than the standard vent before where you couldn't control what direction it's going. Now you have full control on wherever that air goes wherever you need it to be. I like that. It's gonna make things much more comfortable in the rain. Well, I think that does it. Thanks for hanging out, and hope this helped..
Customer Satisfaction Score:
79% were satisfied with this product
21% of customers were not satisfied
Ratings & Reviews
It was hard to find on the web. I wanted a vent that matched the rest in the camper. Found one here and in a quick review of the specs, ordered it and installed it upon its timely arrival. Now if anyone need a 5 in vent I know there there's one laying.
Easy to find part and speedy shipping
Fits perfectly. Factory should have installed this style in the first place. Made a HUGE difference in airflow direction control.
These are awesome. Install these in my 35 foot heartland, because the vents that was in there had no way to damper. And my daughter in the way back never got cold air. Now she does. We can regulate which rooms get air. Wish I would have bought sooner!
It fits, and is the correct color. Also was delivered fast. Not much to get excited about replacing a broken vent cover.
Great product!!! We are able to direct the air or shut off the vent all together. Easy to replace .
It does exactly what I need. Use it to direct AC airflow away from the bunk beds where kids sleep, so that it is not blowing on their faces.
Since adding a second A/C unit to the Toy Hauler, in the garage area, I will now be using these to be able to close off or at least partially close the vents that are being fed from the main A/C unit through the ducts. This is just what I needed to complete the 2nd A/C install.
Really like this product. They work better than the originals that I replaced. The only complaint is they are bigger around than that ad shows. Had to enlarge the holes in the ceiling, that is the size the ad says. Still, a bit of work and like I said, way better than the originals they replaced.
We replaced all of our vents with these. It is nice to be able to adjust the direction and also the amount of airflow. Even can close the air off. Nice upgrade.
Replaced all my factory vents in my Forest River TT. We love these because you can turn them in whichever direction you want plus you can close them completely off.
I received my order and received two different vent covers. Neither of which fit and I will be sending them back. However, the delivery of the product was quick.
Fit exactly into existing cups. Match old ones to a tee.
They work fine. Installed them when I added a second air conditioner to the 5th wheel. They now control the airflow to the bedroom from the original air conditioner when we need it for hot nights.
Looks great and easy to install
They work great. They was a little bigger in size than my original ones so I had to cut out the duct board and ceiling a little bit but not a big deal. I love that the close up. With my tt being 35 ft long the master bedroom was always cold but the bunkhouse never got any cold air, but with these vents I am able to close down and damper areas so the kids don't sweat. Love them! Would buy them again without question.
Vent that came with new trailer was cut wrong. Easier to order new vent and replace myself than to go 50 miles back to dealership! As always, etrailer always has geat prices and very fast shipping!
The vents in the garage part of my RV were fixed position. These louvered models snapped right in. Now I have some control over the air flow back there. Note: The collars that screw into the ceiling are included, though I just left the old ones in place.
Jc
6/8/2024
Still works as expected
I have a 2020 Forest River Salem Hemisphere GLX 273RL
These fit my ac vents perfect! Exactly what I wanted.
I’m not sure if they are making the vents bigger on new campers or not, but mine are 5-1/2” ID.
The vent cover is no white, it is a tan or beige color and is not 5” but 5-1/2”. It does look different then my original vent cover. Not sure why the description is not correct about the color or size. If you are looking for a tan 5-1/2 vent cover then this would be great.
These were perfect for our camper. Will definitely come in handy especially being able to close them over the kids bunks.
Fast shipping and friendly customer service as always with etrailler.
The second set of these I have bought. Same problem. Love the way they work, the price is right, BUT, information on the product is incorrect. Last time I was asked to make a review I made the same comment. The ID is NOT 5 in. as stated, but, 5 1/2 in. Was asked to take a picture, but, had already installed them. This time, took pictures prior to installation. See attached photos. One shows info on the back of package which is the same info quoted on your website. The other photo is the actual size of the unit.
I used this vent for an unusual application in my home. It covers the end of an exposed 4” HVAC duct. It has worked perfectly as a heat register in my exercise room. Thanks for the great product!
I find these to be superior to the factory supplied Blade vents.
First the factory vent has an inside diameter of 4” versus this vent which is 5.5”, this is nearly double the total surface area and allows for increased airflow.
Second, these vents have a damper which the factory vents do not. This allows for the adjustment of the amount cooling from each vent. Also in cold weather it allows me to close all the vents which reduces the amount of heated air that flows into the attic ductwork.
Third, these vents allow for 360 degree control over the direction of airflow. The factory vents did not have this capability.
My AC units couldn't cool down my RV.. Tried everything from the factory and after no reply from the manufacture, turned to the blog. It was suggested some sort of direct vent may help....done and done!! The 5" etrailer Valterra A/C vent looks great, shipped fast and was reasonably priced.....but more importantly, I finally get cool on those hot days!!....
Do you have a question about this RV Vents and Fan?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Samuel M.
8/16/2020
Still working fine after a year, no problems there. Still, the comment on size still applies, they are not 5 as stated but 5 12. This is what many others have found out also. With the aid of my Dremel tool I made my 5 holes 5 12 to install the vent.