Product Experts Available Now!
Call 1-800-940-8924
MB Sturgis Propane Elbow Adapter - 3/8" Female Flare Swivel x 3/8" Male Flare
(104 reviews)
Price: $25.78
In Stock
MB Sturgis
MB Sturgis Propane Elbow Adapter - 3/8" Female Flare Swivel x 3/8" Male Flare
Part Number: 204163
In Stock
$25.78
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (104)
- Q & A (0)
- Videos (1)
- Photos
MB Sturgis Propane Fittings - 204163
- Adapter Fittings
- 3/8 Inch - Male Flare
- 3/8 Inch - Female Flare
- MB Sturgis
Durable, rust-resistant brass adapter with a 90-degree bend simplifies the installation of a propane system in your RV or camper. Female ends swivels 360 degrees for easy connection.
Features:
- Adapter provides simplified installation of a propane system in your RV or camper
- Creates a 90-degree bend for better access to an inlet
- Female end swivels 360 degrees for easy connection
- Durable brass construction resists rust and corrosion
- Made in the USA
Specs:
- Fitting size: 3/8" female SAE x 3/8" male flare
- Quantity: 1 adapter
- 1-Year limited warranty
204163-MBS MB Sturgis Propane Elbow Connector - 3/8" Female Flare Swivel x 3/8" Male Flare
Video of MB Sturgis Propane Elbow Adapter - 3/8" Female Flare Swivel x 3/8" Male Flare
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Hands-On with the MB Sturgis Propane Elbow Adapter
Speaker 1: Today we're taking a look at the MB Sturgis 90 degree 3/8th inch female flare swivel by 3/8th inch male flare adapter. This 90 degree adapter allows for easier installation when needing to make a bend for easier access to an inlet. And we are talking about propane systems with this adapter. The female side of the adapter has the ability to swivel and this is the 3/8th inch female SAE swivel fitting. And then the male flare side can remain rigid. This is a 3/8th inch male flare fitting.
Durable brass construction, does a great job of resisting rust and corrosion, again 90 degree bend and it is made in the U.S.A. That's gonna do it for today's look at the 90 degree adapter.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
Ratings & Reviews
4.9
104 reviews
by:
Frank
09/12/2020
This is exactly the fitting I needed to hook the gas line up to my generator.
It came with a straight fitting with the hose sticking out. With this fitting it goes down
instead of straight out. Works great.
It came with a straight fitting with the hose sticking out. With this fitting it goes down
instead of straight out. Works great.
by:
Chuck
10/27/2026
Exactly what I needed. Shipped fast and arrived in perfect condition.
by:
James
02/15/2026
Did the job. Used on my propane generator so the propane line didn't protrude out the front of the unit.
by:
Robert
01/15/2021
Came as I ordered. The piece will be perfect where I need to use it . As a bonus, it was manufactured in the United States. Thank You etrailer! And, GOD Bless America !
Robert
1/16/2022
Have had no problems whatsoever with this product, thanks
by:
David
05/12/2024
I needed this elbow to run a shorter gas line from the propane manifold to my water heater in my truck camper without using a much longer looping hose. The elbow that I received was an excellently machined product. It was a little more expensive than other places but the speed of shipping was very good.
David
5/12/2025
The larger interior diameter is what was needed for the higher BTU rate in for my on-demand water heater. Still tight and no leaks after a year of bouncing down the highway.
by:
Edward
06/08/2021
Made it easier to have a quick disconnect installed on my grill.
by:
GKAustin
08/03/2021
Well made. Exactly the 90 degree fitting we needed for our new Dickinson two-burner cooktop. Easy to install.
by:
Troy
11/20/2025
Fast shipping, very professional and trustworthy source for parts. William did an excellent job providing feedback and updating me of shipping status.
by:
Trish
01/12/2026
Just what I needed to attach my cooktop to gas.
by:
Phillip
09/10/2025
Quick shipping and a quality part
by:
Dan
04/24/2026
what I wanted….
by:
Sherry
09/29/2025
Was perfect for our portable grill.
by:
William
02/14/2022
Fitting was exactly what I needed to get the gas line hooked up to my new gas forge. Very fast shipping. Would definitely order from these folks again.
William
2/15/2023
Working great. Used elbow on top of the vertical burner on my gas forge. Just what I needed.
by:
Carter
01/08/2020
Product was as described, and arrived quickly.
As usual, great service from etrailer!
As usual, great service from etrailer!
T. P.
1/9/2021
Great, no issues whatsoever.
by:
John
05/19/2021
Exactly the part that was needed to retrofit the propane gas burner unit (needed a 90 degree adapter to route gas line away from grill table surface) for my Kamado Vision grill! Thanks etrailer!
by:
Nick
09/19/2020
Hard to find item needed to hookup Genset propane line .
Looked at all the usual suspects without any luck.
Ordered here and they shipped it to me promptly even though it was a small item.
Looked at all the usual suspects without any luck.
Ordered here and they shipped it to me promptly even though it was a small item.
Nick P.
9/20/2021
Perfect!
by:
Michael
06/14/2019
Ordered item 204163 (90 degree copper propane elbow). Product came exactly as advertised. Had an issue with USPS tracking the package and etrailer.com stepped right in, tracked the package, followed up with me via e mail to assure delivery was on time as planned, which it was.
Highly recommend this company!!!
Highly recommend this company!!!
by:
Keri
03/30/2020
Always great products and outstanding customer service!
Used to connect portable instant hot water heater withe 90 degree fitting. Most portable water heaters use BSP threads. This works perfect
Used to connect portable instant hot water heater withe 90 degree fitting. Most portable water heaters use BSP threads. This works perfect
by:
Benjamin
07/27/2019
Just what I wanted for my Camp Chef side kick. The gas connection when strait out horizontally and when the gas line was connected the grill cover wouldn't fit right however, the 90 degree fitting took care of that issue. I'm very pleased and would recommend this item to anyone else with the issue.
by:
Chuck
03/19/2022
This is just the right fitting to dress my supply line close to the footprint of my generator. No local supplier had this, but it was in stock and shipped cost effectively from etrailer. This is a high quality brass fitting, perfect for my application.
by:
Luis
07/10/2019
Needed to re-route the hose from the propane tank to the BBQ burner at a 90 degree angle to keep the hose from bending (kink) at the connection. PERFECT FIT. Hard to find if you don't know the exact name for this part. Nice fit and feel, no sharp burrs like cheaply made brass parts. Heavy and solid.
by:
Eric
08/22/2022
This is a very rare product..no one sells 90° gas fittings anymore.it fit, and is extremely well made.
by:
Will
09/23/2021
I purchased this extension to use with my onboard propane tank to fuel a fire pit. We set up safely well away from the coach. Very pleased.
by:
Owen
12/14/2019
I purchased this at half the price of the Camco and it works perfect. I have been very happy with Etrailer, my order has always come in on time or early like this time. You know what your getting because it is explained so well, fit like a glove!
by:
Edward
02/10/2019
Perfect fit solved a problem fitting a replacement furnace in our Motorhome
25
104
true
Show More Reviews
See what our Experts say about this MB Sturgis Propane Fittings
- Is There a 45 Degree Angle 3/8" Female Flare Swivel Fitting Hey, Gary! Great question. We don’t have any hoses that come with a 45-degree 3/8" female flare swivel fitting, but we do have an elbow fitting you can add to the end to create that angle. The elbow is part # 204163, and you can use it with either hose # MBS24FR or # MBS84FR. Are you working with a tight space on your camper?
view full answer... - What Can I Use to Get a 90 Degree Bend From My Propane TanksI would recommend using something like the MB Sturgis Propane Elbow Adapter # 204163, which is an adapter that will allow you to get the 90 degree angle you are needing. This adapter has the same fittings the hose you were looking at has. I don't recommend bending the Propane Hose # 37207-31395 to get the 90 degree, because while it is made to reduce kinks, you are going to be reducing the gas flow by putting such a big bend in the hose. You can use hose # 37207-31395 after the adapter...
view full answer... - How To Determine The Correct Propane Fittings For Use With A Propane Stove And Flat Top GrillThe connection type is solely going to depend on the fittings that are on your stove and flat top grill. Most stoves/grills typically have a flare # 204163 or quick disconnect fitting # 104052-401132 so you'll need to see exactly what you have and measure the size as there are multiple sizes for flare fittings. As for the regulator, it's going to depend on the whether or not the stove/grill already has an internal regulator and if there already a regulator in-between the propane tank(s)...
view full answer... - 90 Degree Fitting that Fits Propane Regulator of RVSince you said you need a 90 degree fitting coming off of your regulator what you'd want is the MB Sturgis Propane Elbow Adapter # 204163 which comes with the correct size fitting on both ends.
view full answer... - Could MB Sturgis Propane Elbow Adapter # 204163 be Used with Natural GasYes, if the fittings are the same size that you need of 3/8" female SAE x 3/8" male flare then the part # 204163 that you referenced will be what you'd need.
view full answer... - Does MB Sturgis Propane Elbow Adapter Have 3/8" Internal DiameterThe 3/8" talked about for the MB Sturgis Propane Elbow Adapter # 204163 is the internal diameter. Sometimes fitting sizes can be confusing for propane parts because the measurement given goes by the internal and not the external dimensions. Since this is designed specifically for propane I'm not sure how well this will work for an oil line, plus the fittings will likely be different than your motorcycle so you'll have to get creative on that side of things.
view full answer...
Do you have a question about this Propane Fitting?
Info for this part was:
Expert Research:
Jameson C
Installed by:
Cole B
Written by:
Mary K
Updated by:
Wilson B
Updated by:
Hannah L
Edited by:
Amanda M
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Frank H.
9/13/2021
Its still great, works perfectly. Is exactly what I wanted, you were the only ones that had what I needed. Makes things much easier. Thanks a bunch