Single on/on switch for controlling lights and other applications powered by your battery. SPDT, 16 amps at 125V, 12 amps at 250V AC, 3/4 hp at 125V - 250V AC, 10 amps at 14V DC. Fits cutouts measuring 1-1/8" tall x 1/2" wide.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey everyone. I'm Ellen here at etrailer.com and we're going to be taking a look at the single rocker switch. This is going to be a single-pole dual throw switch. So basically if you think of a two circuits that this is going to control, it's going to divert power from one to the other. So it just gives you one pole, or one bit of power to switch between two things. So, you can switch between a light that's going from a low setting to a high setting or something similar to that.
These are going to be available in black or white. They have the exact same specs, the exact same size. It's just one is available in a different color from the other. So we're going to take a closer look at the black one here. We can zoom in a little bit so you can actually see this little guy.
But you can see it's just a simple switch. So it's just going to switch that power from one circuit to the other from one pathway to the other.The rating for the power is 16 amps for 125 volts, 12 amps for 250 volts AC, and it can run a three quarter horsepower at 125 volts up to 250 volts AC it can also run a 10 amp circuit at 14 volts DC. As far as size goes, the cutout needs to be about half an inch, maybe nine-sixteenths. The switch will be held in by the tension of the four little prongs, two on either side. So you need to have at least an inch and an eighth of space for that to fit into.
It can maybe go out to an inch and a quarter, but somewhere in between there should fit pretty well. The snugger that opening, the better it's going to hold in place. So if you have the option to cut the hole fresh, it's better to err on the smaller side and then wattle it out if you need to.The overall size of the switch from the outside edges is just barely shy of three quarters of an inch wide and then an inch and a quarter long. And the depth is about three eights of an inch. Again, comes in black or white, all the features the same, otherwise.
They are made in the USA. And that's pretty much going to do it for our look at the single rocker switches. I hope this has been helpful in deciding if one of these is going to be the right one for you. We do have other options available here at etrailer.com, so check them out if you're interested. Thanks for watching.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
Do you have a question about this RV Light Switch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.