Wireless HD camera kit with 7" monitor, rear camera, and side marker light cameras provides expanded front, rear, and side visibility with DVR recording and up to four paired cameras
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer. Let's take a quick look together at this Brandmotion Wireless HD Observation System and Wireless HD Side Marker Light Cameras. Now if you're looking for a complete camera system that's gonna be pretty simple to install and will give you a clear view around your vehicle, this kit pretty much has everything that you're going to need. This does come with this seven inch HD monitor and wireless rear camera, and then two side marker cameras that can either replace or compliment your existing marker lights. And this whole system runs wirelessly over a 2.4 gigahertz AHD signal with a reliable transmission range of up to about 80 feet. So you're not gonna be dealing with long cable runs through your vehicle.
So this monitor supports up to four cameras and it includes a built-in DVR recording feature. So you just, all you have to do is pop in a micro SD card, up to 128 gigabytes and it's gonna automatically start recording whenever the system powers on. The monitor itself is crisp and bright. It has a 1024 by 600 resolution, and this is gonna be visible even in daylight. And then the cameras are going to give you a sharp 1936 by 1096 resolution with a 110 degree horizontal and 80 degree vertical field of view.
They are designed for all weather use with an IP 68 rating, meaning they're completely dustproof and highly waterproof. They also handle low light down to 0.2 lux. So you're gonna get usable visibility at dust, dawn, or even in those dim environments. And then the rear camera is going to use an adjustable mounting bracket and the side cameras can tilt up to 30 degrees, letting you fine tune your coverage whether you wanna watch blind spots, monitor trailer lanes, or simply see around tight corners. And this system works with both 12 volt and 24 volt electrical system.
So it's ready for anything from passenger vehicles to RVs, trailers, and commercial trucks. So it's a complete system here. On the monitor, you're gonna get two different styles of mounting brackets, whichever is going to work best for you. And then you see, you get separate different brackets here, depending on what, what type of mountings gonna work best for you, and then screws to get the different cameras in place. And then weather stripping as well.
And this has a wide operating temperature range from negative four degrees Fahrenheit to 158 degrees Fahrenheit. So this is gonna be dependable in those real world conditions. And again, you're gonna get everything that you see here on my table. You're going to get a camera power cable. You're gonna get a monitor power cable. You're going to get a lighter adapter cable and then a DC to 3.5 millimeter adapter. And then your DC barrel plug adapter, along with instructions to guide you through the installation and the operation. But if you happen to have any other questions, whether it's about this kit or anything else that we carry here at etrailer, don't hesitate to reach out to us 'cause ultimately we do wanna make sure that you're getting exactly what you need. Well, again, my name is Andy, thank you for joining me.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.



Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.