Arrives before Christmas 
1,000-Watt inverter lets you use appliances and devices wherever the road takes you. Pure sine wave technology is perfect for sensitive electronics like HDTVs and computers.
Features:
Specs:
This 12V inverter, with built-in transfer switch, changes DC output from your RV batteries into AC power and sends it to the electrical system. Using pure sine wave technology, it creates clean power with low distortion, making it safe, efficient, and perfect for sensitive electronics like computers. The inverter can generate 2,000 starting watts and 1,000 running watts which is a great fit for appliances and electronics. Additionally, with the integrated transfer switch, it will automatically change from inverter to shore power when available.
To connect your AC loads, the inverter includes hardwired 15-amp input cord and an output terminal. It also has positive and negative DC terminals that connect to your batteries. Lastly, there is a port for the included fixed-mount remote. The system includes a number of safety features. It has a reverse polarity protection that will protect the converter if the battery is hooked up incorrectly. Additionally, the unit includes protection for overvoltage, undervoltage, and overloading which can damage your equipment, as well as the converter. The built-in cooling fan also removes excess heat from the unit. The fan speed is proportional to the internal temperature on the converter, so when the power demand is low, the fan will operate quietly. For additional safety, installing a 200-amp fuse (sold separately) between the battery bank and the inverter will protect your equipment from power surges.
The integrated transfer switch selects the primary source of 120V AC current. This switch has been pre-wired to automatically change from inverter to shore power to conserve battery life. It includes a 20-amp leg rated at 135V. Additionally, since the switch only accepts one active source, it protects your electrical system from dangerous backfeed that can damage your equipment.
The fixed-mount remote lets you monitor and control the inverter from inside your RV. It includes a digital display that shows voltage, output power, error codes, and a low battery indicator. It also has a power button to turn the inverter on and off.
The inverter mounts inside your RV in a dry location with ventilation. It should be installed close to the battery bank, but not in the same compartment.
The DC terminals are wired to the battery bank.
There are several ways to connect the inverter to your RV's electrical system, but this will depend on your rig and how you want to use your inverter. If your RV's distribution panel only has one leg, a subpanel will be needed for installation. You will also need a 100-amp circuit breaker between the inverter and battery positive post. Two 20-amp circuit breakers will be needed to channel AC power from the main panel into the inverter and then out into the subpanel.
California residents: click here
Nice products
Do you have a question about this RV Power Inverter?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.