400-Watt inverter lets you use appliances and devices wherever the road takes you. Modifed sine wave technology is perfect for appliances with resistive loads like heaters and toasters. Changes your RV battery's DC output into AC power.
Features:
Specs:
This 12V inverter changes DC output from your RV batteries into AC power so you can plug in tools and appliances. Using modified sine wave technology, it creates a stepped waveform that simulates AC power. This is perfect for resistive loads like electric heaters and toasters. Plus, the inverter can generate 800 starting watts and 400 running watts which is a great fit for smaller appliances.
The inverter includes 2 standard North American outlets for AC loads, positive and negative DC input terminals with battery clamps that connect to your batteries, 12V DC adapter, USB port for charging small electronic devices, and a port for a fixed-mount remote (sold separately).
The system includes a number of safety features. It offers protection from over/under voltage and overloading. The inverter also uses a heat sink process to protect from extreme temperatures, and an internal cooling fan removes excess heat from the unit.
The inverter mounts inside your RV in a dry location with ventilation. It should be installed in close proximity to the battery bank, but not in the same compartment. The DC terminals use battery clamps that connect to your batteries or you can use the 12V DC adapter.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the Go Power Heavy-Duty Modified Sine Wave Inverter. This heavy-duty modified sine wave inverter converts DC power to AC household power wherever you go. This is perfect for smaller loads like portable electronics and tools. It runs any device and wattage range without interference.On this end right here we have the dual standard outlets. We also have a USB outlet. And we have our on and off switch and two notification LEDs.
One is a power indicator and the other one is a fault indicator.On the other end we have the connection points to secure the battery bank negative and positive cables to the inverter. This post right here, this is the chassis ground. So you'd use this connection ground the exposed chassis of the inverter to the chassis ground. And then we have our cooling fan here so it prevents the unit from overheating.Really nice design. Small, compact, heavy-duty steel case.
It's strong and durable. It offers full overload protection nit's compatible with 12 volt systems. It is designed to be used with deep-cycle lead acid batteries, gel, and AGM batteries can be used but keep in mind that they do require special charging procedures which you can learn more about in the included instructions.It does come with a couple accessories, some battery cables. These battery cables have ring terminals on one end and clips on the other. This one has ring terminals on one end and the accessory plug on the other end.And when it comes to the overall dimensions of the unit going edge to edge this direction, that measures about 6 and 1/4, maybe 6 and 5/16ths if we include the outermost point which would be right here.
Top to bottom is about two and almost two and 1/2 inches. It's actually about two and 9/16ths, so just a 16th of an inch over two and 1/2 inches. When it comes to the width that's gonna give us a measurement at the base of around four inches, at the widest point it's about four and 1/4.Now, the continuous output power is 400 watts. Peak surge power is 800 watts. The AC output voltage is 100 volt to 120 volts.
Input voltage range, 10.5 volts to 16 volts DC. The AC output waveform is modified sine wave. Maximum efficiency is 80% and the battery drain with no AC with no AC load is less than or equal to 0.7 amps.The product is lightweight. It only weighs about a pound and a half or so, 1.54 pounds. The low battery alarm is at 10.5 volts plus or minus 0.5 volts, and low battery shut down is at 10 volts give or take 0.5 volts.That's gonna do it for today's look at the Go Power Heavy-Duty Modified Sine Wave Inverter.
Average Customer Rating: 5.0 out of 5 stars (3 Customer Reviews)
400-Watt inverter lets you use appliances and devices wherever the road takes you. Modifed sine wave technology is perfect for appliances with resistive loads like heaters and toasters. Changes your RV battery's DC output into AC power.I was very pleased with the professionalism of this company and the quality of their products.
Product is just as it was described, shipment was very fast. Thank you
Do you have a question about this RV Power Inverter?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.