Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These tracks mount directly to your naked-roof vehicle to create strong, low-profile attachment points for Rhino-Rack roof-rack legs. Each track has dual C-channels so that you can mount the tracks to your roof and mount legs to the tracks.
Features:
Specs:
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
Ratings & Reviews
First of all, it turned out pretty well.
However, after the tracks arrived in distressed packing (see photo), I worried I'd need to return and start over, but fortunately, the contents of the package were undamaged. Then, since the holes for the T-bolts to secure the tracks required a 6.5mm drill, I had to order one before starting the installation process. Another $x for the two drills. Then carefully measuring and double checking that there was clearance underneath for attaching the knobs, and then I triple checked the measurements again. The most important one is the 15mm measure from the ends of the tracks for the first T-bolt at each end of the tracks. The other holes are not as critical since you are able to slide the T-bolts in the track to align with its corresponding hole. I did add a bit of silicone on the holes for extra leak prevention. Probably, unnecessary. At first I thought these tracks could have been a bit longer for my camper shell on a 5' bed, however once installed, they look pretty good (see photos). Now, if I'm able to install roof basket that attaches with my new tracks, I'll be very happy.
Rhino Racks are quality products, about the same quality as Yakima or Thule, slightly cheaper. Channel installation on my Tacoma topper went smoothly. I temporally taped the rails to roof with a tape, so they couldn't move. I would also recommend to check bottom of your roof for "bum outs", so your wing nuts don't lend in a wrong spot.Measure twice before you start to drill holes. Second pair of hands helps, but it is not absolutely necessary.
I made several purchases from etrailer, I was always satisfied. I can recommend them highly.
"One year later, and these Rhino-Rack tracks are still holding strong—literally and emotionally. I’ve thrown everything at them: bikes, kayaks, a storage box full of camping gear, and at one point I’m pretty sure my dignity. They haven’t budged.
Installation was straightforward—though I did manage to invent some new curse words during the process, just for fun. Once on, though, they’ve been rock solid. No rust, no wobble, no mysterious rattles in the night.
Honestly, the only downside is now I have zero excuses not to carry everyone’s stuff. Family trip? ‘Brian’s got the roof rack.’ Neighbor moving? ‘Brian’s got the roof rack.’ Basically, I’ve become the neighborhood pack mule—but a stylish one, thanks to these tracks.
If you want reliability with a side of unsolicited popularity, these are your tracks."
I wanted to use my Rhino-Rack bars and accessories, although I did not want a bed cover on my new RAM 2500. So I mounted these Roof Rack Tracks directly to the bed rails. They fit perfectly, I only had to separate the nyloc nuts from the plastic knobs which did not fit under the rail.
Custom built a mixed Rhino-Rack and Thule bike carrier. Started with the RTC tracks, added Rhino-Rack crossbars, then Thule bike carriers. Customer support was very helpful in getting compatible parts. Took some ingenuity on my part, too, but I love the way it turned out!
I bought a new Honda Ridgeline and Leer camper shell. I got these to replace the Thule tracks I used previously. Unfortunately the steel pads that slide in the track for the Thule pedestals are just about a 1/32" to big to fit. I fixed that problem with my bench grinder. Now the fit very well and are fully functional. In every other way these tracks are superior to Thule. The T-bolts and oversized nuts are much, much better than what Thule offers. I also like the cutout at the end of the track that allows removing the pedastals easily and without tools.
Good quality product and looks better than the higher priced Yakima and Thule
its great
Decent product, terrible purchasing experience
Product - These are well-made and met my expectations
Service - It took three tries to order because the payment system is terrible and kept rejecting my credit card because my address was wrong (it wasn't). I was forced to use PayPal for the first time in 20+ years which is ridiculous.
Packaging - The box arrived broken in half and was taped back together at the post office. The parts bag had numerous cuts in it and 4 O-rings were missing.
Luckily the missing parts are easy to locate at any hardware store, but would have been a real inconvenience if something else was missing.
Arrived quickly which is nice. One track came with a small dent and I am missing a few o-rings. Other than that It’s good stuff
These are exactly what I needed to put rails on my camper shell to mount the roof rack that I wanted. Thanks!
Brooke M.
8/10/2023
I will have our customer service team reach out to you about the missing pieces. Thanks for letting us know!
Product arrived promptly and well wrapped! The finish and quality is much better than expected. Heavy duty!!
great addition to allow me to move my roof rack around
Rack and system work great. I also purchased a kayak add on system that stated to rust within 6 months. 1 year later and I don't feel safe using it.
Excellent design and manufacturing quality. Etrailer has installation videos on youtube. Modern fiberglas truck beds and matching caps taper toward tailgate (for rearward visibility) which means the rail/crossbar will be a trapezoid instead of a rectangle. The butyl patches are messy but effective, better to place on T-bolts and mold below o-ring instead of placing on holes in cap. The M6 T-bolt protudes past knobnut inside cap enough to thread on eyenuts for hanging cargo hammock and whatever. Was pricey to get 71” rails with 59” crossbars, had to order separately, not sure why the price penalty since all parts pull from Colorado under different skus anyway.
Rhino-Rack Rails work great. Put them on a truck topper to work with a Rhino Rack cross rails system. Easy to install and they are secure.
You will need to apply extra silicone or caulk when drilling holes through the topper as the rubber washers on the bolts don't quite stop all leaks.
Don't forget that fiberglass truck toppers need to be reinforced to support extra weight.
I just installed these tracks and have not used them yet. They seem pretty solid. The install took a few hours, a good part of which was building up the courage to drill 16 holes in my roof.
With this set up one needs to take a little extra time on the layout, but the finished product looks nice.
I gave 4 stars because the extra width of the tracks first work well for me. My top falls away slightly before the edge, so the outside edge of the track has a 1/16 to an 1/8 inch gap. I don't think it shows in the picture.
I'm planning to use these with Yakima towers, but am waiting on the parts I need.
Installed 71” RTC-18 on my 2008 Tundra Double Cab camper shell. 6’5” length bed on this truck. Installation was kind of a pain, but I got it done. Everything is secure and the tracks are high quality. I plan to mount a Prinsu style aluminum rack to these tracks, kayak rack, rocket box, ski/snowboard racks, plywood, etc.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Sierra K.
1/17/2022
Customer Service will reach out to you.