See what our Experts say about this Inno Accessories and Parts

• Solution to Allow Older Thule Square Crossbars to Fit Truxedo TS Rails of Tonneau
  The Inno foot kit part # INXP does fit the TS rails of your tonneau cover and is compatible with your Thule older square bars so it would be the solution you are looking for.
  view full answer...
• 2003 Subaru Forester Parts to Fit Thule Square Bar to Flush Mount Rails
  Hey Jose, thanks for reaching out! If you have the new style Thule square bars with the slots on the undersides, like the part # TH712200, then you'll need these Thule parts: - Evo Flush Rail Feet # TH710601 - Fit Kit # TH75JE - Lock Kit # TH450400 For the older style of Thule square bars that don't have the slots on the undersides, we'll need to get you setup with some parts from Inno, as Thule doesn't make parts that fit with that crossbar anymore. Here are the Inno parts you need: ...
  view full answer...
• Will Inno Square Crossbar Roof Rack Fit on 2003 Subaru Forester X with Rola Roof Cargo Basket
  Yes, the 46" Long Inno Square Crossbars # INB117 are compatible with both your Thule Canyon XT Roof Cargo Basket # TH859XT-8591XT and your 2003 Subaru Forester X. Since your Forester has the flush mounted rails you need the Inno Feet # INTR and the Fit Kit # INTR104 to utilize the square crossbars. I have attached a photo of this same kit along with the 31" Inno Fairing for Roof Racks # INA260 on a 2008 Subaru Forester a customer sent in that you can check out.
  view full answer...
  
• What Parts do I Need to Use the Inno Square Crossbars on My 2004 Subaru Forester with Flush Rails?
  Yes! I am happy to confirm that the following parts are compatible with your flush rails on your 2004 Subaru Forester: - Inno Square Crossbars - Steel - Black - 46" Long # INB117 - Inno Feet for Square Crossbars - Track Systems, Flush Side Rails, and Fixed Mounting Points # INTR - Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet # INTR104 As far as the video that you mentioned, the reason why we do not have flush rails pictured in the demonstration video...
  view full answer...
  
• Parts Needed to Complete Inno Roof Rack System for 2008 Subaru Forester
  Yes. The complete Inno Roof Rack System for a 2008 Subaru Forester uses the Inno Square bars # INB117, Square Bar Stays # INTR you mentioned, plus the Fit Kit # INTR104. The Fit Kit is required to mount the feet to the vehicle and are specific to the roof rack feet and vehicle. I've linked a short review video of this system for you to check out as well.
  view full answer...
• Inno Roof Rack Recommendation for 2007 Subaru Forester
  For your 2007 Subaru Forester with raised side rails we have the Inno roof rack part numbers # INB117, # INTR, # INTR104 that INNO recommends as a fit. The bars that come with this, # INB117 are 46 inches long. If you wanted the longer 58 inch bars you'd need the part # INB147.
  view full answer...
• Roof Rack for 2008 Subaru Forester Sports X that Can Fit Future Vehicle
  It can be hard to buy a roof rack that fits a current vehicle and a possible one in the future but the Rola you referenced does not fit your current 2008 Subaru Forester so it would not be the way to go. The Inno square bar roof rack part numbers # INB117, # INTR, and # INTR104 is the best option for a rack that's solid, cost effective, and most likely the easiest to transfer to a future vehicle.
  view full answer...
• How to Use Older Thule Square Crossbars for 2007 Subaru Forester with Flush Mount Rails
  There are parts you can use for your application! The Inno square bar roof rack system actually uses bars that are the same size as the older Thule square bars so you can use the legs and fit kit from their system to complete a rack for your 2007 Subaru Forester with flush rails. Below are the parts for the complete Inno roof rack - you just need the Inno Feet and Custom Fit Kit: 46" Inno Square Crossbars - # INB117 Feet - # INTR Fit Kit - # INTR104 The Inno feet come with locks so that's...
  view full answer...
• Which Yakima Roof Mount Bike Racks Work with Factory Cross Bars on a 2004 Subaru Baja
  Basically, the factory cross bars on your 2004 Subaru Baja are not directly compatible with Yakima roof mount accessories like the FrontLoader Wheel Mount Bike Carrier, # Y02103, because of their size and/or shape. But there is a solution. If you wanted the FrontLoader specifically, you would need to add the Inno Square Bar Roof Rack, parts # INB107, # INTR and # INTR104.. You can then add the FrontLoader.
  view full answer...
• Replacement Inno # INTR Feet and Fit Kit # INTR104 for a 2007 Subaru Outback Wagon
  Yes! For your 2007 Subaru Legacy Wagon, you need the Inno Feet for Square Crossbars # INTR and the Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet # INTR104. These are both confirmed to fit with your Inno squre crossbars on your 2007 Subaru Legacy Wagon.
  view full answer...
• Roof Rack And Canoe Carrier For A 2005 Subaru Legacy Outback Wagon
  For your 2005 Subaru Legacy Outback Wagon, I recommend using the: -Inno Square Crossbars # INB117, with the feet # INTR, and the fit kit # INTR104. This roof rack will easily and quickly attach your factory roof rails and provide an attachment point for a canoe carrier. For a canoe carrier, the Malone BigFoot Pro Canoe Carrier with Tie-Downs # MPG112MD is an excellent choice that will work with the mentioned Inno crossbars # INB117, and has a weight capacity of 165lbs, so it will be...
  view full answer...

Do you have a question about this Accessories and Part?