See what our Experts say about this Swagman Accessories and Parts

• P315 Conversion Bar for Swagman XP Bike Racks
  Part # P315 probably would not work with your hitch. My information shows that the only available hitches for your 2008 Kia Optima are Class I hitches and P139 is for Class II only. We do have another adapter that will work for a Class I hitch. It is part # HTAD and it will allow your Class I 1-1/4 hitch to accept 2 inch accessories. You will need part # PC2 to hold the adapter into your hitch, and if you do not already have one, part # PC3 to hold your bike rack to the adapter. Please...
  view full answer...
• What Is The Bolt Hole Spacing On Replacement Shank for Swagman XP Bike Carriers P315?
  Hello Robert, thanks for reaching out. I went out to our warehouse and measured the Replacement 1-1/4" and 2" Shank for Swagman XP Bike Carriers # P315. I edited a picture to show the dimensions you requested. Typically, these parts are brand and model specific to the bike rack so you will want to make absolutely sure this matches up with what you need.
  view full answer...
• Way to Convert a 2 inch Swagman Original Bike Rack to be 1-1/4 inch Hitch Compatible
  Yes, you would want the Replacement 1-1/4 inch Shank part # P315. This will replace the shank of your Swagman Original Bike rack part # S64400 and will let you install it in either a 2 inch or 1-1/4 inch hitch. If you plan on installing this rack into a Class I hitch you should note that you will be limited to only carrying 2 bikes.
  view full answer...
• Replacement 2 inch Hitch Adapters for Swagman XP Bike Rack and Curt Cargo Carrier
  The only way we offer the 2 inch adapter for your Swagman XP # S64960 is with the replacement shank part # P315. Since Curt does not have replacements available for their shank adapters you'd need a sleeve adapter like the part # HT02 and you'd be set.
  view full answer...
• Replacement Adapter Sleeve for Swagman S64670 XTC2 Bike Rack
  The replacement adapter for the Swagman XTC2 # S64670 bike rack is part # SP323 which includes Includes adapter, bolt, and threaded hitch pin and clip.
  view full answer...
• Can Swagman XC Hitch or RV Bumper Mount Rack # S64663 Be Used w/ 2012 Ford Fusion 1-1/4 Inch Hitch
  In order to use the Swagman XC Hitch or RV Bumper Mount Rack, # S64663, with the 1-1/4 inch on your 2012 Ford Fusion you will need a hitch adapter like the Brophy, # HTAD. Please do keep in mind that using an adapter reduces the tongue weight capacity of your hitch by 50 percent and can cause extra movement in the rack. This is where using a support strap, like part # 18050, would come in handy. I spoke with my contact at Swagman and they do not offer a 1-1/4 inch replacement shank for...
  view full answer...
  
• Availability of Replacement Shank for Swagman XP # 64960 Bike Rack
  The correct replacement shank for your Swagman XP # S64960 is part # P315, as long as your rack was manufactured after 2009. The # P132 shank you referenced is a replacement shank for Swagman 3 bike racks, and is not designed to accommodate 4 bikes nor is it designed to work with your Swagman XP model. I have confirmed this by phone with Swagman. The # P315 does feature a threaded pin hole. According to my Swagman representative, there is not a 2 inch only shank available for your bike...
  view full answer...
• Replacement Swagman XC Shank Recommendation to Allow an XC Rack to Be Used in a 1-1/4 inch Hitch
  It sounds like you need the Replacement 1-1/4 inch and 2 inch Shank for Swagman XC Series Bike Carriers # P306. This product can be used on older model Swagman XC bike racks that originally only were designed for 2 inch hitches to allow them to be used on 2 inch and 1-1/4 inch hitches like you have.
  view full answer...

Do you have a question about this Accessories and Part?