Video Transcript for Review of Detail K2 Snow Plow Parts - Replacement Extended Cross-Member - K273FR

Hi, everyone, Stephen here with etrailer. Let's take a look at a replacement extended cross-member for the DK2 snow plows. Now, this is gonna replace that extended cross-member for the D2 snow plows. It's gonna provide that connection point between the snow plow and the vehicle specific custom brackets. You should already have the brackets. If you don't, those are sold separately.

You can reach out to us here at etrailer if you need assistance finding those. And this will ensure durability. It's reinforced steel and it has a corrosion resistant black powder coat finish. It does work with the Detail K2 Rampage II Snow Plow kit, the Rampage II Elite 82 by 19 Snow Plow kit, the K2 Storm II, the K2 Storm II Elite 84 by 22 Snow Plow kit, the K2 Summit II Snow Plow kit and the K2 Summit II Elite 88 by 26 Snow Plow kit. Now, in case you need some dimensions overall side to side, I got 33 and one quarter inches and then you have the tabs out here in the front.

So as far as like a depth with those and everything, let's go ahead and turn this a little bit here. So if I go out roughly to the end here of that tab, back to the back, it's about 12 and three quarters inches. And if I go straight on the lip there, not the tab, it's right at 11 inches pretty much from back to the top of this. So hope that those dimensions help you. Again, it is designed for just those snow plows and those kits I mentioned as well.

Again, a direct replacement. This is a extended cross-member for the DK2 Snow Plows. I'm Stephen, thanks for watching.