Video Transcript for Hands-On with the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers

Hi there, I'm Michael, with etrailer.com. Today, we're gonna take a quick look at this Gen-Y Adjustable Two Ball Mount with Stacked Receivers. This is going to allow you to hook your trailer up to your tow vehicle. This will slide right into your two-inch by two inch trailer hitch receiver on your vehicle. And then it is going to provide the two-inch ball and two and five 16th inch ball. Or you compare the ball with the pintle lock here if you're using a lunette ring couplers.

So there's several different kinds of trailers that you can hook up, too. It gives you lots of versatility there. And then of course, we are going to have our eight-stack receiver tubes that are going to have the two-inch by two-inch opening. So it can accommodate both our ball and pintle lock as well as other hitch-mounted accessories. And so, bike racks, cargo carriers, that sort of thing.

So having these eight-stack receiver tubes is going to allow us to move our ball mount up and down to accommodate different height trailers. Make sure that they're gonna be riding nice and level. Our max drop from the top inside edge of our receiver tube down to where that coupler's gonna sit our lowest mounting point, is going to be 17 and a half inches. And so that's gonna give you a lot of adjustability there to accommodate those trailers that sit much lower than your hitch. This is a nice, heavy-duty steel construction.

So it is gonna be ideal for your towing extra large loads. It's got a gross towing weight of 10,000 pounds. That's of course, the weight of the trailer plus the load included. It's going to have a max tongue weight or downward pressure on your hitch ball of 1,500 pounds. This does have a zinc primer and powder coat finish, that's gonna resist corrosion, hold up well our ball, and pintle lock are going to have a matte black finish.

So it's gonna look really nice. It's going to also help provide some corrosion resistance as well. And you can see, we are going to have pins for each of our accessories. Our pintle lock can slide back when we're not wanting to use it. We've got a position there that that will lock in place or we can pull it forward, and lock it in place there. But each of these pins is your standard five eight inch diameter. So it will also work for your other hitch mounted accessories if you're going to be putting your bike racks and that sort of thing in place. So you're going to get one pin for your pintle lock, one pin for your ball mount. There's also a pin here for our support arms, it's holding those in place. These are just going to attach to your vehicle to provide that stability since this is such a long drop. It's going to make sure that it's not swaying side to side and that sort of thing. So you can move this from, depending on which receiver you're needing to use for your vehicle, that can be adjusted, so that it's giving you the support without taking up the whole, or the receiver that you're needing. One thing that's not included is your hitch pin and clip to secure this to your receiver tube on your vehicle. It's just gonna use your standard five eight inch diameter pin, which you probably already have for your hitch. But if not, we do have lots of options available here at etrailer.com. We also have locking pins available that will add a little extra security to make sure, and no one's able to take this off of your vehicle when you're not around. This does meet the SAE J684 Certified Standard, so you can trust it is going to do a good job for you. It is also made here in the USA, so you can trust it's made to the high quality standards we've come to know and trust for products that are made here in the U.S. And Gen-Y, does have a great reputation for building very robust, beefy, solid pieces. So this is going to be no exception to that. This is gonna hold up well, it'll give you a lot of adjustability for towing different height trailers, different kinds of attachments for your trailer. So, definitely, for those of you who have, like, a higher truck. So your hitch is sitting up pretty high and you're needing to tow lots of different kinds of trailers, or if you're just needing to tow the one trailer with a big drop, this will work out really well for you. So that completes our look for today. Again, I'm Michael, with etrailer.com. Thanks for watching!.