Video Transcript for Review of SAM Snow Plow Parts - Western Plow Parts - 3371303220

Hi, everyone, Stephen here with etrailer. Today, we're taking a look at a replacement plow shoe assembly for those Western Snowplows. So folks, this, as you probably already know 'cause you're replacing it, is one snow shoe assembly, or shoe assembly rather, for your Western Snowplow, and it's comparable to Western's part number 49071. And as you probably already know, you've got a stack here of spacer and about 16 washers it looks like. And this will mount to the bottom of your blade so that your cutting edge can travel safely over uneven surfaces. And of course you have the pen here to keep everything in place whenever you have it installed.

As far as some quick measurements, just so you can be sure it's gonna work with your needs, on a width over here on the shoe, I got about five and 11/16 overall on the diameter. From the ground to the top plane here, I got nine and 7/8 inches tall. And then just the shaft itself from the flat part here to the very top, I got eight and 3/4 inches tall. And this shaft is one inch in diameter. So again folks, easy to install or remove with this included pin here and clip.

Obviously it's constructed of a heavy duty steel. It's a very, very extra thick base. It's got a lot of weight to it and everything. And you can see it's got that beveled edge there or whatever. And again, this will be great for reducing wear and tear on that cutting edge, thus extending the life of your cutting edge.

So again, if you've never replaced these, they do get replaced every now and again because this is kind of your weak point if you will, in your whole system again, thus protecting the blade. And that will wrap up our quick look together folks. I'm Stephen, reach out if you have any questions about this or any other products and have a great day.