WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front and Rear Set
This item does not fit your vehicle
2011 Jeep Compass
These items fit your vehicle
2011 Jeep Compass
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These premium mud flaps are easy to install and digitally designed for a perfect fit. Protect your vehicle and your trailer from road debris. Flaps are constructed of durable thermoplastic resin and install with factory hardware.
Features:
Specs:
Precision fit, durable components and ease of installation make WeatherTech NoDrills your first choice in mud flaps. Installing mud flaps has never been this painless. Installs with factory hardware - no drilling required.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com. Let's take a look at these WeatherTech Front and Rear Mud Flaps. Now these are custom designed to specifically fit your 2020 to 2022 Ford Escape and on custom fit parts such as these mud flaps, I do recommend taking advantage of our vehicle fit guide here at etrailer.com. Simply input the year, make, and model of your vehicle and our fit guide will confirm if these will work for you or if we have something comparable that will work for you. These premium mud flaps are digitally designed to fit your Escape, giving them that factory look and perfect fit, protecting your Escape, your trailer and drivers behind you from road debris. And these flaps are going to be an easy install.
There's going to be no drilling or tire removal necessary. They're going to install with the included hardware that you see here on my table before me. And also instructions are included to walk you through the installation process step by step along with pictures to make that installation even easier. And just to give you a closeup here of the rear mud flaps, these are made here in the USA. They are molded from high quality, durable thermoplastic resin.
So these are going to be very strong. I think they're gonna be very long lasting. They're gonna do a great job of protecting your Escape and your trailer and also doing a great job of resisting against the elements that these are gonna be constantly exposed to. So you are going to receive everything that you see here on my table before me. Again, I mentioned the mounting hardware.
You're gonna get two rear flaps, two front flaps, for a complete set of four flaps. And as we end our time together, let me go over some measurements with you of these flaps. See if I can line up my tape measure here, so you can see. So beginning with our rear flaps first, looking at the overall width, we are sitting right at nine and one eighth inches wide. And then looking at the height from bottom to top, hopefully you can see that from that angle, we're sitting pretty close to 14 and one eighth inches.
And then looking at the front flaps, again, looking at that width, we're sitting right at nine and a quarter inches. And then the height, looks like we're right at 11 inches from bottom to top. Well, that's gonna wrap up our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Ratings & Reviews
Mudflaps fit nicely and are relatively easy to install. HOWEVER, the instructions for the rear flaps are not right. The instructions tell you to remove the screws holding the fender line to the bed, except there aren't any screw - on mine anyway. There are plastic plugs instead. I looked up the OEM install and you're just supposed to run the screws into these plastic plugs. So once I did that, the rears installed fine. But it threw me for a loop when the install instructions didn't match my truck.
Attaching an image of how my rear fenders are from the factory. Note there are no screws.
Seems like a solid product. Made in the USA. The instructions were a bit off. So I jumped on the etrailer YouTube account, found the install video. Issue solved. I will say I'm more impressed with etrailer than weathertech. However, nice fit and finish. I would recommend this product.
Super easy install great factory look and they actually do help i have a white ram 2500 that used to look dirty from any water on the road 5 feet after the car wash now I dont have to wash my truck every day to keep it looking clean 5 car washes a week is $100 at $20 each so these pay for them selfs
Vehicle: 2026 Ram 3500 Dually. Ordering was simple with website identifying which items fits my truck. Arrived quickly and tracking update to date to prepare for arrival. Ordered for all 4 tires. Took less than 20 minutes using the 2 factory screws. Nice factory molded look. Awareness, The rear are shorter than your typical rubber mudflats.
I ordered Weather Tech mud flaps for my GMC Sierra 1500. The front flaps were easy to install by using existing fasteners installed on the truck by GMC. The rear flaps were slightly more challenging requiring the placement of clamps (integral to the flaps) on the rear fender. The entire installation of all flaps required about 45 minutes. they look great and they will protect my fenders from being damaged by road debris.
Are you serious with the question or is this just a computer generated inquiry?
Easy installation. Instructions are easy to understand.
Would have gave a 5 rating but had trouble with a flawed supplied screw clip so took a bit longer on the install. Had to remove the clip and modify so supplied screw would thread into clip. This happened to be the last screw to tighten.
This is a good investment. First, etrailer is a great place to get what you need for supplies! The weathertech mud flaps are a great addition to a raised F-250 with larger tires that pulls. This will provide the rest of the protection I need as well as cut down on debris that the tires throw up at other cars/trucks. Very easy to install and if I want to remove them then I have all the pieces necessary except for the push grommets which I can get anywhere. I think I will leave them on for a while....not bad looking either.
The Weather Tech mud flaps are very well made, fit perfectly and are very simple to install. I’m very impressed with them and they really help protect the body of my Jeep Grand Cherokee.
the fit was very good with the mud flaps fitting with my factory fender trim. The only issue was the clips that came with the setup. there were supposed to be 4 and there were only 2 in the packaging.
I purchased these for my wife's new 2031 chevy traverse. They look great and were easy to install. I have had many weather tech products through the years and have been very happy with them.
These no drill mud flaps are easy to install and look factory after installation. I was told by Weather tech they would not fit my 2025 F450, but they were wrong, they fit perfectly. I wish they used black screws and washers, it would look more finished than an after thought with the stainless metal screws and washer. Great product, would recommend, thus the five star rating. I have been using Weather tech products for years.
Fits my 2018 Chevy Silverado 1500 custom front steering wheels mud flaps. Bolts on correctly and fits good.
Weather tec is great, getting it from e trailer is also great. As the fit is always guaranteed. There customer service and follow up is second to none.
Mudflaps fit perfect and look great. Great business to deal with and fast shipping
Front mudflaps were easy to install. Rear mudflaps need a new design. Instead of a bolt, two washers, and a lock nut, WT should use some sort of insert into the whole where the bolt goes through. It is extremely difficult to get the washer and lock nut onto the bolt as the area is small. Something like a drywall anchor in the hole and then screw into the anchor. Finished product looks great. Please pass my comments onto Weather Tech.
WeatherTech products looks fantastic and are easy to install. This set was simple to install on a 2021 RAM Power Wagon
Quick shipping was always from etrailer. Product was a perfect fit on my vehicle and easy install took about 30 minutes.
These were easy to install and look great on my 2023 F350 dually. I was a little concerned about how close the passenger side one is to the exhaust tips. Have only used them on one 2 hour drive but so far so good.
Vehicle 2026 Ram 2500 Dually. Ordering was super easy to identify the mudflats for my vehicle. Quick delivery with tracking to prepare when they arrive. Installation: Use the 2 current factory screws on each fender for a quick install, less than 20 minutes for all 4 a nice clean factory molded look. Front length looks good. Just for awareness. The rear isn’t as long as your typical rubber mudflap if you are looking for something that hangs closer to the ground. Hopefully can see the length in the photos.
Great product. Excellent quality. Looks great. Very simple to install. Took about 15 minutes to install. Fit was perfect. No adjustments to make. Fast shipping.
quality product-- looks good does the job--read instructions and you will not have a problem - they do seem a little longer than other brands but that is what I wanted
Install person says front don’t conform with 2024 Escape. Maybe I’ll be shipping them back.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.