To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These premium mud flaps are easy to install and digitally designed to fit your car or truck. Protect your vehicle and your trailer from road debris. Flaps are constructed of durable thermoplastic resin with stainless steel fasteners.
Features:
Precision fit, durable components and ease of installation make WeatherTech NoDrills your first choice in mud flaps. Installing mud flaps has never been this painless. Patent-pending QuickTurn stainless steel fasteners makes installation quick and easy - no drilling required.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our 2018 Ford F250 we're going to be taking a look at and showing you how to install the Weathertech easy install no-drill mud flaps for the front and rear. It is available for the front only and for the rear only. So here's what our mud flaps are going to look like once we have them installed. Now these are going to greatly reduce the amount of dirt and debris that's going to be on the lower section of our truck and our running boards.And you can see that our mud flaps are going to contour all around the body perfectly because they are custom made for our truck. They are made out of a durable thermoplastic resin so they're going to hold up to even the harshest environments. And here you can see the rear mud flap.
It's going to contour around the body nicely as well. Now the rear really is going to help maintain the back of our truck from getting dirty, like the tailpipe, keeping it from rusting out over time and it's going to keep our trailer or our camper nice and clean on the front.Our mud flaps aren't going to require any kind of drilling because they're going to use the quick turn-style connector. There's a little cam in there to squeeze against the body and then I'll use factory holes with stainless steel hardware so we won't have to worry about them rusting out. So now that we've taken a look at our mud flaps let's show you how easy it is to get them installed.To begin our installation we're going to start on the driver's side front. If we come to the back of the front wheel well we'll have two bolts that are going into the side of the body here.
Grab a 5-1/2 millimeter socket and I'm going to pull those two screws out. You want to make sure you hold on to them because they are going to get reused. So we can grab our mud flap. They are labeled so you just grab the one that has the LH on it for left-hand.Then we want to bring our attention to the cam that's up here. Now with the cam you can to see that we're going to have two symbols.
We'll have a lock and then an unlock. You want to rotate this so that this little tab here is in the unlocked position. Then we can set it against the truck. We'll line up our mud flaps and the two holes line up with the factory holes. And we're just going to loosely install the screws so they'll hold it in place.Then we can take the included Allen key.
We'll come to the cam and we're going to tighten it and as we tighten it you'll see that cam swing over to the lock position. We'll continue to tighten it until it gets nice and snug. You don't want to crank down too much. You just want to make sure that it's snug and that it's not going to come loose. Then we can come back and tighten up those two screws with that 5-1/2 millimeter socket.And that will finish up the install for this one on the front. So we'll go ahead and repeat that for the other side as well. If we move back to the rear wheel well we're going to have two pushpin fasteners on the bottom of this rocker panel. We're going to need to pull these two out. I'm using a trim panel tool. You can use a flathead screwdriver or whatever you have available. But I will let you know that typically these fasteners do break sometimes but that's okay because they're not going to be getting reused.And if the head of the pushpin breaks off we can just push it in until it falls out. So we can grab our rear mud flap and again you want to make sure that cam is in the unlocked position. Now these two holes in the mud flap are going to line up with those two holes we took the pushpins out of. But we're not going to be using pushpins. We're going to be using a set of screws and these black washers to go through.These are going to go all the way through the mud flap and through the bracket right here and then we're going to be attaching some hardware on the back. It's going to be a little bit hard to see because I'm going to have to have my hand in there. But we'll line everything up and put one of the screws in place. You kind of want to just hold everything, make sure it doesn't fall, you don't lose your hardware.And then we're going to reach on the backside, follow our screw up with a silver, flat washer and then we're going to secure it down with one of these black flange nuts. It is a little bit of a tight fit but you can reach your hand behind there and put the hardware in place. Now I found that it's a little easier if you can get one piece at a time started so if you can get the washer just to sit on the bolt and then put the nut on. And just get it on there hand-tight it will hold everything in place we can get the rest of the hardware in.So with the rear one in place we'll take our included Allen key again. We're going to tighten up that cam so it's nice and snug, making sure it's in the locked position. I'm going to grab a Phillips bit or a Phillips head screwdriver and we can tighten up the two screws so they're snug. Now the nuts on the back or flange nuts and have little teeth on them so if we get them snug enough by hand we should be able to tighten these up without having to hold the nut on the back.And then we can repeat that process for our other rear mud flap. That will finish up your look at the Weathertech easy install, no-drill mud flaps for the front and rear.
Average Customer Rating: 4.8 out of 5 stars (785 Customer Reviews)
These premium mud flaps are easy to install and digitally designed to fit your car or truck. Protect your vehicle and your trailer from road debris. Flaps are constructed of durable thermoplastic resin with stainless steel fasteners.Review from a similar No-Drill Digital Fit in Mud Flaps
Excellent product. Purchased for my 2018 F350 Dually. Self install. Zero issues in 12 months of usage. Recommend this product. 600776
Review from a similar No-Drill Digital Fit in Mud Flaps
Great product! These mud flaps fit my 2019 F-350 dually very well and look superb! Installation was easy. The truck has factory installed front wheel well liners so the stock screws used to attach the front mud flaps were a little too short. Etrailer's shipping was extremely fast. 553286
Review from a similar No-Drill Digital Fit in Mud Flaps
great product for the price, took about an hour to install all 4, etrailer has extremely fast shipping ordered thurs. night and received them sat. morning. 472857
Review from a similar No-Drill Digital Fit in Mud Flaps
Fit as described. Easy to install. They have held up thru harsh winter conditions. I'd recommended these to anyone. 674949
Review from a similar No-Drill Digital Fit in Mud Flaps
Excellent product. Took about 20 minutes to install all 4 mud flaps. I really liked the 'no drill' installation and they fit like a glove. A little more than I would have liked to have paid but as always, you get what you pay for. Timely delivery too. 62885
Review from a similar No-Drill Digital Fit in Mud Flaps
Once you get them on, they are great. They look great. Problem is on the install. On a 2017 F250, the fronts don’t go on very easy. Be prepared for a fight. The screws that you take off the front of the truck that you are supposed to reuse is somewhat short. The outside screws are fine. The inside screws only bite the nut clip if you are able to push the clip forward somehow and really push the screw in. The width of the molding on the mud flap takes up any excess the screw had. Weathertech should send screws that are about 1/16” longer for the front. I finally got the front installed after 2 hours fighting with those 2 screws. The outside screws went in a little easier. The rear was very easy and took about 5 minutes to install. 476080
Review from a similar No-Drill Digital Fit in Mud Flaps
Guards arrived within a few days of order. All parts were provided and in good shape. The mud guards are a perfect fit for the truck. I installed them myself. The back guards were a little more difficult to install than the front ones. It only took about 10 minutes for the front ones and a half hour for the rear after I got everything I needed tool wise. I highly recommend the guards and the service by Nick was great. He knew exactly which guards I needed. 608752
Review from a similar No-Drill Digital Fit in Mud Flaps
These mud flaps fir extremely well and only took 45 minutes to install. Nice product. 70475
Review from a similar No-Drill Digital Fit in Mud Flaps
These look great and are very sturdy. They are very easy to install only took me 20 minutes and it was in the dark. No more mud slinging all over my nerf bars and tail pipe or tear end when I go to deer camp. I definitely recommend them! 5 stars and kudos too. Uses original hardware on front end and supplied hardware on rear end. 607105
Review from a similar No-Drill Digital Fit in Mud Flaps
WeatherTech dually mud guards very easy install about 10 minutes a side. 404850
Review from a similar No-Drill Digital Fit in Mud Flaps
The Mud Flaps were not the correct ones and I h ad no problem retuning them. 570688
Review from a similar No-Drill Digital Fit in Mud Flaps
Mud flaps came very fast, we’re very easy to install..would highly recommend! 510100
Review from a similar No-Drill Digital Fit in Mud Flaps
I received the mudflaps for my Explorer fast, I installed them myself, and they look great. Added a little extra class, plus protection from rocks. Thanks! 505649
Review from a similar No-Drill Digital Fit in Mud Flaps
Went on easy no permanent mods to the truck. Well designed. Have goodyear duratrack tires on my 2018 duramax. Keeps a good amount of mud off the truck compared to none. Very satisfied. 639064
Review from a similar No-Drill Digital Fit in Mud Flaps
Purchased these mud flaps for my 2017 F250 last week. Installing them was super easy!! Great quality and great customer service. Thanks! 544808
Review from a similar No-Drill Digital Fit in Mud Flaps
Very pleased with the Weather Tech mud flaps. The fit is perfect and the install could not have been easier. I took my time and still had them on in minutes. No need to turn the front wheels if you are using a 5.5mm wrench. Looks good on the truck, too. 672515
Review from a similar No-Drill Digital Fit in Mud Flaps
I don't often order through the mail as I have been stuck with inferior products in the past. However, I took a chance on e-trailer and purchased a 4 set of mud flaps for my new 2016 RAM. I liked the idea that no drilling was required. I received the flaps in seven days from date order. They came wrapped good and encased in plastic. No dings or scratches. The flaps were of good construction and fit my RAM perfectly. The install took only 20 minutes by removing two existing screws, holding a flap against the wheel well and reinserting the screws. The only tool I used was a ratchet with a 5/8" head. My only negative comment is that the photograph of the WT110026-120026 shows a twist bolt to secure the inside bottom of the flaps but they were not on my product. However, my flaps fit secure and probably do not need the twist bolt. I also ordered a US Army trailer hitch cover but it is backordered and promised in mid Sep. I will do business again with etrailer. I am now looking for a small RAM logo to put on the two back flaps. 285536
Review from a similar No-Drill Digital Fit in Mud Flaps
Received flaps today, only took 15 min. to install the set, front and rear. Looks good and they extend out from finders to catch water from the tires that extend out from the fenders also. Looking good. Glad that I got them. 370166
Review from a similar No-Drill Digital Fit in Mud Flaps
fit great easy to install looks good 939648
Review from a similar No-Drill Digital Fit in Mud Flaps
Very satisfied Quick shipping 939545
Review from a similar No-Drill Digital Fit in Mud Flaps
Easy to install and look great in 938704
Review from a similar No-Drill Digital Fit in Mud Flaps
I've had these on for about a year and they greatly helped in preventing mud from building up on the running boards!! 938230
Review from a similar No-Drill Digital Fit in Mud Flaps
Very nice fit. 937225
Review from a similar No-Drill Digital Fit in Mud Flaps
Easy to install , good product for the price. 935651
Review from a similar No-Drill Digital Fit in Mud Flaps
Everything was great the order was delivered on time when you said it would be here so I'm satisfied 935442
Do you have a question about this Mud Flap?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.