To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These premium mud flaps are easy to install and digitally designed to fit your car or truck. Protect your vehicle and your trailer from road debris. Flaps are constructed of durable thermoplastic resin.
Features:
Precision fit, durable components and ease of installation make WeatherTech NoDrills your first choice in mud flaps. Installing mud flaps has never been this painless. Patent-pending QuickTurn stainless steel fasteners makes installation quick and easy - no drilling required.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello neighbors, welcome back. I'm Steven with etrailer.com. Today, we're taking a look at these WeatherTech mud flaps. They're really easy to install with no drill required, and they're a digital fit for the rear dually of a 2020 to current Chevy Silverado 3500 Dually truck. Now that being said, please make sure you use our fit guide. Go to etrailer.com, top center of our page, enter your year, make, and model, and probably the bed size and some other things, and we will get you the right set the first time.
Now again, these are simple, very easy to install. There's no drilling whatsoever required or tire removal. They are made in molded from a very nice, high quality thermoplastic resin, so they're very, very nice. They don't flex hardly at all, honestly. I mean this way they'll flex a little bit, but you want that whenever you're driving and hitting bumps and whatnot, some flex, and they do protect your vehicle better than the factory set of plastic guards that are on your truck.
And then they also protect your trailer and other motors from dirt and debris by catching anything that would splash up that kind of stuff. Now you're gonna get two rear flaps. They're made here in the USA. It is very, very simple to install, quite honestly. So you're gonna get an included torque head, so you're gonna use this guy.
You're gonna take off the factory three screws or torque head screws that are on the back, current molding trim, where these are installed on the back of your truck. You'll take those off, you'll take the plastic piece on that's currently on your truck. You'll replace it with this guy. You'll put those three torque screws back in lightly, and then it's got two included metal clips here. Once you've got this installed, those metal clips, one of them will go on this side of the driver and one will go on the other mud flap, but you'll press that in.
Once that's clipped into place, then you will finally finish tightening those three, and it's very simple, simple as that, and you're done. So a very nice product. If you've ever got anything WeatherTech, we also carry their mud flaps and that kind of stuff and other things, but very, very nice quality. They're always really good at making that a nice digital fit. They use laser technology to measure everything, and it's gonna have a very nice, crisp, clean factory look when you're done. Well, folks, that's gonna do it for our look at these WeatherTech mud flaps. Again, these are for the 2020 to current Chevy Silverado 3500 Dually trucks. I'm Steve with etrailer.com, have fun installing.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
Ratings & Reviews
Seems like a solid product. Made in the USA. The instructions were a bit off. So I jumped on the etrailer YouTube account, found the install video. Issue solved. I will say I'm more impressed with etrailer than weathertech. However, nice fit and finish. I would recommend this product.
Super easy install great factory look and they actually do help i have a white ram 2500 that used to look dirty from any water on the road 5 feet after the car wash now I dont have to wash my truck every day to keep it looking clean 5 car washes a week is $100 at $20 each so these pay for them selfs
Vehicle: 2026 Ram 3500 Dually. Ordering was simple with website identifying which items fits my truck. Arrived quickly and tracking update to date to prepare for arrival. Ordered for all 4 tires. Took less than 20 minutes using the 2 factory screws. Nice factory molded look. Awareness, The rear are shorter than your typical rubber mudflats.
I ordered Weather Tech mud flaps for my GMC Sierra 1500. The front flaps were easy to install by using existing fasteners installed on the truck by GMC. The rear flaps were slightly more challenging requiring the placement of clamps (integral to the flaps) on the rear fender. The entire installation of all flaps required about 45 minutes. they look great and they will protect my fenders from being damaged by road debris.
Are you serious with the question or is this just a computer generated inquiry?
Easy installation. Instructions are easy to understand.
Would have gave a 5 rating but had trouble with a flawed supplied screw clip so took a bit longer on the install. Had to remove the clip and modify so supplied screw would thread into clip. This happened to be the last screw to tighten.
This is a good investment. First, etrailer is a great place to get what you need for supplies! The weathertech mud flaps are a great addition to a raised F-250 with larger tires that pulls. This will provide the rest of the protection I need as well as cut down on debris that the tires throw up at other cars/trucks. Very easy to install and if I want to remove them then I have all the pieces necessary except for the push grommets which I can get anywhere. I think I will leave them on for a while....not bad looking either.
The Weather Tech mud flaps are very well made, fit perfectly and are very simple to install. I’m very impressed with them and they really help protect the body of my Jeep Grand Cherokee.
the fit was very good with the mud flaps fitting with my factory fender trim. The only issue was the clips that came with the setup. there were supposed to be 4 and there were only 2 in the packaging.
I purchased these for my wife's new 2031 chevy traverse. They look great and were easy to install. I have had many weather tech products through the years and have been very happy with them.
These no drill mud flaps are easy to install and look factory after installation. I was told by Weather tech they would not fit my 2025 F450, but they were wrong, they fit perfectly. I wish they used black screws and washers, it would look more finished than an after thought with the stainless metal screws and washer. Great product, would recommend, thus the five star rating. I have been using Weather tech products for years.
Fits my 2018 Chevy Silverado 1500 custom front steering wheels mud flaps. Bolts on correctly and fits good.
Weather tec is great, getting it from e trailer is also great. As the fit is always guaranteed. There customer service and follow up is second to none.
Mudflaps fit perfect and look great. Great business to deal with and fast shipping
Front mudflaps were easy to install. Rear mudflaps need a new design. Instead of a bolt, two washers, and a lock nut, WT should use some sort of insert into the whole where the bolt goes through. It is extremely difficult to get the washer and lock nut onto the bolt as the area is small. Something like a drywall anchor in the hole and then screw into the anchor. Finished product looks great. Please pass my comments onto Weather Tech.
WeatherTech products looks fantastic and are easy to install. This set was simple to install on a 2021 RAM Power Wagon
Quick shipping was always from etrailer. Product was a perfect fit on my vehicle and easy install took about 30 minutes.
These were easy to install and look great on my 2023 F350 dually. I was a little concerned about how close the passenger side one is to the exhaust tips. Have only used them on one 2 hour drive but so far so good.
Vehicle 2026 Ram 2500 Dually. Ordering was super easy to identify the mudflats for my vehicle. Quick delivery with tracking to prepare when they arrive. Installation: Use the 2 current factory screws on each fender for a quick install, less than 20 minutes for all 4 a nice clean factory molded look. Front length looks good. Just for awareness. The rear isn’t as long as your typical rubber mudflap if you are looking for something that hangs closer to the ground. Hopefully can see the length in the photos.
Just what I needed. Yes, I would buy again.
As always, thanks etrailer.
Great product. Excellent quality. Looks great. Very simple to install. Took about 15 minutes to install. Fit was perfect. No adjustments to make. Fast shipping.
Brooke M.
6/22/2025
Looks fantastic, John! Happy to hear it was a good install experience. :) Are you towing anything where you're trying to keep things from flying up on it?
John
6/20/2026
Excellent product. No issues after a year of use.
Heather A.
6/20/2026
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Victoria H.
2/27/2025
The install looks great, Juan!