Product Experts Available Now!
Call 1-800-940-8924
THIS ITEM IS NOT A FIT FOR
1985 Mazda RX-7
We'll connect you with nearby partnered installers who know this exact setup.
Thule TracRac TracONE Ladder Rack for Toyota Tacoma - Toolbox Mount - Fixed Mount - 800 lbs - Silver
Part Number: TH27000XT-501
In Stock
$829.90
1985 Mazda RX-7
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (446)
- Q & A (0)
- Photos
Thule Ladder Racks - TH27000XT-501
Highlights
- Custom Fit for Your Vehicle: Installs with hardware that attaches to your truck's bed rails or stake pockets
- High Load Capacity: Carries up to 800 lbs, great for ladders, lumber, or kayaks.
- Clamp-On Installation: Mounts to bed rails with included hardware—no drilling needed.
- Toolbox Ready: Built-in clamp mounts let you add a crossover-style toolbox securely.
- Rustproof Strength: 6000-series aluminum with dual powder coat resists corrosion.
- Secure Cargo: Slotted crossbars and 4 load stops keep gear steady during transport.
Features to know about
Strong Support for Work or Weekend Gear: Carries Up To 800 lbs
This fixed-mount ladder rack handles up to 800 lbs, so it’s built for hauling everything from ladders and lumber to kayaks and paddleboards. The over-cab height keeps long items stable and out of the way, leaving your truck bed open for other cargo. With a wide base on each upright, the rack stays solid under load without needing extra bracing.
Quick Setup Without Drilling: Clamp-On Installation
The rack installs fast using a no-drill clamp system that grips your truck’s factory track rails securely. Each upright base is held in place by heavy-duty aluminum clamps that torque down tight, so you get a sturdy connection without having to modify the bed. It’s simple to remove when you need full access to the bed for larger items.
Toolbox Friendly Mounts: Built-In Attachment Points
If you use a crossover-style toolbox, this rack is ready for it. Four of the included clamps have pre-drilled attachment points that line up with your toolbox mounts, so you can bolt it on without drilling into the bed rails. The setup keeps your gear organized and still leaves room for long materials overhead.
Secure and Adjustable Loading: Slotted Crossbars with Load Stops
Each 65" long aluminum crossbar has top and bottom channels that accept a variety of tie-downs and accessories. The included four heavy-duty load stops slide along the slots so you can position them where you need for different sizes of cargo. Built-in trip strips along the front edge keep wind noise down, even when the bars are empty.
Built To Last: Rustproof 6000-Series Aluminum with Dual Powder Coat Finish
The TracONE uses 6000-series aluminum that’s both lightweight and strong. It won’t rust, and the silver dual-stage powder coat adds another layer of protection. An e-coat base layer bonds tightly to the metal, while a clear topcoat resists scuffs and scratches. The result is a rack that stands up to years of weather and heavy use.
Specs
Weight and Capacity
- Carrying capacity: 800 lbs
Dimensions
- Crossbar dimensions: 65" long x 4" wide x 1-1/2" tall
- Upright support height: 26-1/4"
Warranty
- Ladder rack: Limited lifetime
- Mounting kit: 2-Year
27000XT Track Rack Track One Truck Bed Rack - Silver Finish
41501 Track Rack Mount Kit and Toolbox Mount Kit for Toyota Tacoma - 2016-Current Model Years
Replaces TracRac TA27000-01-41501-01
This Product Fits The Following Vehicles
- 2016 - 2023 Toyota Tacoma 5 Foot Bed
- 2016 - 2023 Toyota Tacoma 6 Foot Bed
Ratings & Reviews
4.6
446 reviews
by:
Lorrin
07/07/2026
2021
Toyota
Tacoma
I cannot find the second box of the two box deleivery.
by:
Marcello
08/01/2022
The rack is great!! Looks awesome and very functional. Great for carrying 2 x lumber, wish it had rings on the posts for easier securing. I would give it 5 stars or at least 4.5, if not for the slight mounting issue. The bases that sit on top of the bed are not at the proper angle causing the arms, the sections between the base and the top cross pieces, to be leaning in slightly. The cross pieces then do not fit exactly, they can be fastened on but once tightened down, the cross pieces have a bow. I lessened the bow by adding shims to the underside of the cross pieces but I had to get longer fastening bolts. Overall great product.
by:
Patrick
04/13/2021
Easy to install. It is very sturdy.
by:
Bill
07/24/2021
Arrived quick lily and was very simple to install.
by:
Michael
07/13/2023
Great product, love it!
by:
Daniel
12/21/2022
2022
Toyota
Tacoma
by:
Jeff
05/07/2025
Outstanding product. Fit was perfect. Easy to install and great customer service and support.
Jeff
5/8/2026
Still holding strong. No chips in the powder coat and the finish has not faded. What a great product.
by:
Brad
11/15/2025
I'm happy with the product, but installation was a bit of a pain. I figured I'd leave a review for others so they don't make the same mistakes I did.
The primary issue is the really long allen-head bolts used to clamp down on the sides of the bed (see picture). They are way longer than they need to be, and leave no room to use a drill driver or socket wrench. For all eight of these bolts, I had to use the short end of an allen wrench and turn these less than a half turn at a time. It took forever. For those doing this installation in the future, I recommend buying much shorter bolts. The kit comes with 3/8"-16 x 3.0" bolts. The bolts could easily be half as long, at 1.5". You'll need 8 of them. If you end up getting hex head bolts rather than allen head, you'll want to make sure the head is as small as possible to allow room for a socket wrench to fit over it and not scrape up the sides of the truck bed.
The other thing that would have made this installation easier is not putting the end caps on until after the the main assembly is mounted on the truck. There's a screw that holds the end caps on and it's difficult to get the holes lined up unless you're under it. The instructions say to do this before mounting it on the truck. I recommend skipping this step and coming back to it as the final step.
I'm otherwise happy with the product and I would recommend it.
The primary issue is the really long allen-head bolts used to clamp down on the sides of the bed (see picture). They are way longer than they need to be, and leave no room to use a drill driver or socket wrench. For all eight of these bolts, I had to use the short end of an allen wrench and turn these less than a half turn at a time. It took forever. For those doing this installation in the future, I recommend buying much shorter bolts. The kit comes with 3/8"-16 x 3.0" bolts. The bolts could easily be half as long, at 1.5". You'll need 8 of them. If you end up getting hex head bolts rather than allen head, you'll want to make sure the head is as small as possible to allow room for a socket wrench to fit over it and not scrape up the sides of the truck bed.
The other thing that would have made this installation easier is not putting the end caps on until after the the main assembly is mounted on the truck. There's a screw that holds the end caps on and it's difficult to get the holes lined up unless you're under it. The instructions say to do this before mounting it on the truck. I recommend skipping this step and coming back to it as the final step.
I'm otherwise happy with the product and I would recommend it.
Kate F.
11/19/2025
We love reviews like yours Brad! Thanks for the great pointers for the next person trying to install this ladder rack. We really do appreciate you taking the time, etrailer is lucky to have you as a neighbor (customer).
by:
Rocky @ Rox Roofing
05/26/2026
Purchased TracRac for my 2020 f250. I carry a 28 foot ladder every day. So far so good. I would recommend it and would by another if needed.
Claire H.
6/2/2026
It's always great to hear from someone putting the TracRac to work every day. We appreciate the recommendation and are happy it's been a good fit for your F-250!
by:
Eric
09/15/2026
2026
Ram
1500
nice to look at but all clamps needed tapped to except the 3/8x3 stainless you furnished. also needed to change those Allen bolts to hex head do to factory installed tie down rail
by:
Frank
08/05/2026
2022
Ford
F-150
Every part is designed to fit very well with tolerances uncommon these days from foreign suppliers.
Needing something for both work and free time; hauling ladders and watercraft and this fits my needs on those. I still need to figure out the best means for securing the cargo but having the secure platform of these racks makes that a lot more doable.
Needing something for both work and free time; hauling ladders and watercraft and this fits my needs on those. I still need to figure out the best means for securing the cargo but having the secure platform of these racks makes that a lot more doable.
by:
Steven
07/02/2025
Rack is solid state man, it is relatively easy to install, except for the all head bolts that hold the the tacoma rail system , there very close to the skin of the truck bed and torque them in is time consuming, other then that i use it for everything. Thank you
Gwendolyn Y.
7/10/2025
Looks like you're ready to head out to the water, Steven! Heading anywhere fun soon?
by:
Frank
03/14/2025
Fantastic experience from ordering to receiving my new Thule Trac Rac system. My package was delivered quickly and without any damage.
The installation instructions were clear and simple to follow. I’m very happy with my new rack system
The installation instructions were clear and simple to follow. I’m very happy with my new rack system
Gwendolyn Y.
3/14/2025
The new rack looks awesome on your truck, Frank! What are you going to use it with?
by:
Sean
07/01/2026
2023
toyota
Tacoma
Product itself is good and as advertised, however, one of the mounting brackets/clamps in the tacoma conversion kit has a screw hole that was machined improperly, making it impossible to use that clamp unless you had the appropriate tools to correct the threading.
by:
Jay S.
04/21/2026
toyota
Tacoma
1. One of the cross members is miss-drilled causing the end cap to extend past the end of the cross member which is causing a whistling noise as I drive.
2. The clamps for mounting on the Tacoma with bed rail have poor quality control of the tapped holes. I had to force the bolts into the threads stripping the first couple threads.
almost as if the bolts were cross threaded but they were not. it was 6 out of the clamps.
3. Also, tightening the bolt on the clamp causes deformation in the bed rail. An insert to install in the rail would eliminate the deformation. I see this leading to the clamps loosening as the deformation continues.
The overall rack gets a 3 star due to the quality control of the threads and the miss-aligned hole in the cross member.
The clamps get 2 stars as i anticipate the constant maintenance issue with the damage to the rails.
2. The clamps for mounting on the Tacoma with bed rail have poor quality control of the tapped holes. I had to force the bolts into the threads stripping the first couple threads.
almost as if the bolts were cross threaded but they were not. it was 6 out of the clamps.
3. Also, tightening the bolt on the clamp causes deformation in the bed rail. An insert to install in the rail would eliminate the deformation. I see this leading to the clamps loosening as the deformation continues.
The overall rack gets a 3 star due to the quality control of the threads and the miss-aligned hole in the cross member.
The clamps get 2 stars as i anticipate the constant maintenance issue with the damage to the rails.
by:
Tommy
06/05/2019
2016
Ford
F-350 Super Duty
Rack is sturdy and well built. Took less than an hour to assemble and install. Maximum height of rack does not clear the top of the cab of a 2016 Ford F-350 SD Crew Cab. If you want to carry a kayak it will require foam blocks or Malone kayak saddles made for the Tracrac(not carried by etrailer). You can not carry a long ladder if used on this vehicle. Over all it is good rack though.
Tommy
6/6/2020
Still working great as a kayak rack using foam blocks.
by:
Jason
07/26/2026
I will have to say the C clamps screw holes were powder coated. They didn’t cover the holes before they powder coated, and there is eight clamps!! Took me a very long time to get those screws through…
by:
Jason
07/26/2026
I love this ladder rack so much I originally bought in 2019 when I started my business. Just recently it got damaged due to someone hitting my ladders/rack I was very upset but luckily I was able to buy the exact same rack!! Best rack ever!!
by:
Kim
04/09/2026
I love the utility. Very easy to secure loads and great capacity. Loses 1 star because the Allen screws used to secure it to the bed are difficult to tighten with a ratchet because they are quite close to the bed liner so the Allen socket ends up misaligned. Also, the pressure of the "clamp" style of mount distorts the composit bed top over time.
by:
JR
04/25/2022
Rack was a good fit for my 2016 Chevrolet Colorado and is solidly constructed and easy to install. Expensive but probably worth the money. No problem at all with black powder coating in screw threads, which many other reviewers complain about. I bought the Thule aero rack pads at the same time. They do not fit the rack properly and I’m disappointed that etrailer did not question the order and offer advice.
Jr
4/26/2023
Products are good and solid for my purposes. The black coating on two of the mounting brackets blistered and flaked off within 9 months and the aluminum underneath began quickly to corrode. Contacted Thule, who were very helpful and quickly replaced the two brackets under warranty. It is surprisingly difficult to find good quality pads that fit these wide racks.
by:
Antony
02/19/2026
2015
Toyota
Tacoma
This rack kit included additional special clamps for Tacoma's track at an additional price, something necessary to install. I was immediately impressed at the quality of the materials and engineering. It was not too difficult to assemble and install, but one should use a torque wrench. In a few cases I needed to chase the threads in the clamps. Tightening the clamps was difficult because the bolt head was too close to the bed wall to use a ratchet and could only use a L shaped hex key - kinda awkward. Once installed, I'm very pleased with it's strength and appearance. I will add that doing business with etrailer was a pleasure from the info on their site to the shipping and communication.
by:
Ryan
07/10/2025
2025
Toyota
Tacoma
Great looking rack! Needed the special Xsporter clamps for my 2025 tacoma. Perfect fit.
by:
Timothy
06/16/2026
The threaded holes in the clamps were powder coated, This required the thread be cleaned up or chased with a tap before they would accepted the bolts. Once this was done the bolts were accepted flawlessly. Otherwise great product and am pleased with the final outcome.
by:
Alan
05/08/2026
The clamp blocks had to be tapped since the threads were coated with paint. Everything went together as planned. I reccommend using the optional tools for assembly. Using an Allen Wrench was time consuming and difficult since all of the hardware is locking.
by:
Seth
08/12/2022
I love this truck rack! I want to give it 4.5 stars but that’s not an option. The reason I’m leaving 4 stars instead of 5 is so that people will read this review for the one critical element that gives it a mark down. The brackets are made specifically for a Toyota Tacoma with the bed rails. The issue is that the bolts used to tighten the rack to the truck are so tightly wedged against the inside bed of the truck that it’s almost impossible to get to them. It’s incredibly easy to strip the head of the bolt because of the angle required to insert a tool to tighten them onto the truck bed.
For context I do not keep this attached to my truck at all times it is only used when I need to utilize the truck rack.
We purchased some ratchet style tools that allow us to put it on faster but that does not prevent the stripping of the head of the bolt used to tighten the brackets.
My recommendation to Thule And or etrailer is to include the necessary tools to attach this to the truck because there is no standard tool that works well. The ratchets that we purchased were maybe $10 each however the hex bit required is still too long even at an inch. If we could find them in half an inch that would be optimal, but my search has so far proven unsuccessful.
With that said it holds the weight limit as indicated and felt super sturdy on a 14 Hour drive loaded with roughly 450 lbs.
For context I do not keep this attached to my truck at all times it is only used when I need to utilize the truck rack.
We purchased some ratchet style tools that allow us to put it on faster but that does not prevent the stripping of the head of the bolt used to tighten the brackets.
My recommendation to Thule And or etrailer is to include the necessary tools to attach this to the truck because there is no standard tool that works well. The ratchets that we purchased were maybe $10 each however the hex bit required is still too long even at an inch. If we could find them in half an inch that would be optimal, but my search has so far proven unsuccessful.
With that said it holds the weight limit as indicated and felt super sturdy on a 14 Hour drive loaded with roughly 450 lbs.
25
446
true
Show More Reviews
See what our Experts say about this Thule Ladder Racks
- Ladder Rack for 2021 Toyota Tacoma that Fits with BAK Flip MX4 Tonneau CoverI have a solution for your but since the Thule TracRack TracONE ladder racks like the # TH27000XT-501 attach by wrapping around the bed rails they cannot fit with a tonneau cover like the BAK Flip Mx4 part # BAK48426 if you have a 5 foot bed or # BAK48427 for if you have a 6 foot bed. So instead you'd want a ladder rack that attaches to the top of the bed rails like the Adarac Pro Series which also has vertical uprights that help with tonneau cover panel folding clearance. If you had...
view full answer... - Recommended Ladder Rack for 2022 Toyota Tacoma w/ Bed Rail SystemThule TracRac offers some high quality options for your truck. They're lightweight, yet carry a pretty high weight capacity that would be great for most folks. If an 800 lb capacity would be sufficient for you, the Thule TracRac TracONE ladder rack, part # TH27000XT-XK4 would be a great choice. Do you have a crossover style toolbox that rests on the edges of the truck bed? If so, going with the # TH27000XT-501 would be a better choice because it includes clamps for mounting your toolbox. Either...
view full answer... - Transferring Thule TracRac TracOne Ladder Rack From a 2014 Toyota Tacoma To a 2022 TacomaThe only difference between the Thule TracRac TracONE Ladder Rack # TH27000XT-500 which fits your 2014 Toyota Tacoma and the Rack # TH27000XT-501 which fits your 2022 Toyota Tacoma is the mounting kit. For your 2022 it uses the Mount Kit # TH41501 while your 2014 uses Kit # TH41500. If you have a different rack than the Rack # TH27000XT on your current Tacoma please let me know what model it is so I can ensure you if the new mount kit will still work on your rack.
view full answer... - Ladder Rack for 2016 Toyota Tacoma Compatible w/ Crossover ToolboxThe Yakima # Y01151-58 ladder racks would interfere with a toolbox, and therefore wouldn't be a good choice for you. This being said, Thule has a ladder rack system that's specifically designed to accommodate a toolbox. If your truck has the factory cargo rail system in the bed, use part # TH27000XT-501. If you do not have the cargo rails, use # TH37005XT. I've provided a photo showing the toolbox mounts.
view full answer...
- Recommended Ladder Rack for 2020 Toyota Tacoma With Optional Bed Rail SystemThe right ladder rack will depend on what you're wanting to use it for. If you're mounting this on something that's strictly a work truck, you won't need any height adjustment so something like the Thule TracRac TracONE with its 800 lb capacity, part # TH27000XTB-XK4B for Black or # TH27000XT-XK4 for sliver would work perfectly. Either rack kit would mount using the bed rails you mentioned, and wouldn't require any drilling for installation. If you also have a crossover toolbox, you'll...
view full answer... - Can Two Thule Hullavator Kayak Carriers Fit on TracRac Ladder RackYes two of the Thule Hullavators part # TH898 can fit on the Thule ladder racks like the part # TH27000XT-501 that you referenced. Since the Hullavator can install in top channels of ladder racks like this and the bars are plenty long two of these would fit and work well.
view full answer... - Availability of Truck Bed Ladder Rack for a 2016 Toyota Tacoma with Mounts for Tool BoxSounds like you are looking for the TracRac ONE part # TH27000XT-501 which is confirmed as a fit for your 2016 Toyota Tacoma and clamps securely to your truck bed rails and includes mounts for your crossover-style toolbox.
view full answer... - Thule TracONE Ladder Rack for 2013 Toyota Tacoma 4-Dr CabFor the 2013 Tacoma, you'll want to use the # TH27000XT-501 which is a fit only if your Tacoma has the utili-trac in-bed cargo management system. The # TH27000XT-500 is a fit for 2016 and newer model years, according to Thule.
view full answer...
Do you have a question about this Ladder Rack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Tyler C
Video Edited:
Jacob T
Video by:
Dustin K
Updated by:
Wilson B
Updated by:
Alex H
Written by:
Matthew S
Test Fit:
Bradley B
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gwendolyn Y.
5/9/2025
The rack looks awesome on your truck, Jeff! Looks like you got some kayak carriers up there?