etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
This item does not fit your vehicle
2013 Ford Fusion
These items fit your vehicle
2013 Ford Fusion
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This hitch opens the door to light and moderate towing or hauling jobs. With a 4,000-lb maximum gross trailer weight and 400-lb tongue weight rating, it’s built for small campers, boats, or utility trailers. The 2" x 2" receiver works with most ball mounts, bike racks, and cargo carriers, so you can haul gear or tow equipment without juggling adapters.
It’s designed for straightforward DIY installs. The hitch bolts to the frame using existing holes, meaning no drilling or welding is required. A complete hardware kit and installation instructions are included, so you can get it mounted in a driveway with basic tools. Once installed, you’ve got a solid Class III connection point ready for towing or carrying accessories.
The matte black finish doesn’t just look rugged—it works hard too. The powder coat over a protective base layer resists rust and corrosion while disguising dirt, scuffs, and small dings better than a glossy surface. The round-tube design keeps the hitch clean-looking under the bumper while holding up to daily use in all kinds of weather.
Precision robotic welding gives this hitch its strength and consistent fit. Every seam is solid for durability over years of towing and hauling. Whether it’s carrying bikes or pulling a loaded trailer, that fully welded steel frame provides the confidence that your setup will stay secure mile after mile.
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
Ratings & Reviews
Nice looking and very easy install!
Wonderful hitch. Never had an issue with it!
One year later, hitch is working great on my 2013 nissan murano.
Great customer service
E trailer is the best! Using them for y ears
My only suggestion is, do you research on videos on proper installation?
Great product and instructions for an easy install. I would recommend.
Great fit directions spot on make sure you clean weldnuts tap purchase was well worth it.
Bolted right up and tugged a moving trailer from Portland to LA
Very easy to install! Directions were g reat!
Great hitch. heavy duty and a nice powder coated. In my case the directions state to drop the rear muffler assembly but I was able to install without dropping muffler.
This is second hitch I purchased from ETrailer. They have all your towing needs.
I tried to drop the exhaust but it was more difficult than it looked (even with some WD-40 to lube the rubber connectors), so I decided to try installing without doing that. I got a 12x1.25 tap and it was well worth it--far easier to clean out the 12mm bolt holes with that than with one of the bolts (I tried both). Without dropping the exhaust it was a little challenging to get the tap lined up and turned all the way in--it's a pretty tight space. Then it is a two-person job to get the receiver bar in place--one person to hold one end while you hold the other and get one bolt in finger tight, then go to the other side and do the same. The receiver bar was just a little narrow--had to flex it a little to get the last bolt in. I did put the car up on jack stands to have more room to work. Really flexible folks might be able to do it without that. Torque the 12mm bolts to 83 ft./lb., the smaller bolt to 23 ft./lb., and you're done. Way cheaper than paying to have someone else do it.
I think I got my wires crossed on my review. I left an excellent rating on what I thought was the receiver hitch for my 2011 Nissan Murano, but I think the rating I left was for the wiring kit for the lights hookup. Really doesn’t make any difference because the wiring kit was excellent as well. I have etrailer hitches on two other vehicles I own. That’s the reason I came back to etrailer for this hitch. Perfect build quality and it fit like a glove. Excellent people to do business with. You won’t be disappointed.
Hitch arrived in a box not damaged. The right side was good. The left side was bent slightly. Of course I learned this after starting on the right side. Took it back down and put it in a vice to straighten the left side. Once that was complete all went well. Lowering the exhaust and having the thread cleaner is a must. Makes it so much easier.
Great hitch & it has not rusted, which is a plus.
Would recommend your company every time.
It was super easy to install. Took 20 minutes. Fits right in. I bought for my nissan murano 2012 sl. Great product, heavy duty
Super easy, barely an inconvenience!! I bought this hitch for my Murano and it fit like a glove. Incredibly easy to install by yourself, at 50, in your driveway. The hardest part of the entire task was fighting off 2 nests of wasps in my shed. I wanted to use four 2 x 10's I had so I could jack the back wheels up a few inches for clearance. Of course the boards were in the very back of the dilapidated shed and I had to employ art of war tactics to push past the beasts. This doubled the install time but fortunately all wasps were harmed in the process. The hitch was a breeze to install and the instructions and etrailer YouTube video were extremely helpful and accurate for the hitch install process but unfortunately it was of no benefit at all regarding the wasps. The instructions never even mentioned bugs. Still, 10 out of 10 stars!!
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.