Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Secure this TV mount to the wall of your cargo compartment and slide it out for family movie night. You can swivel your TV toward your camping chairs and lock the mount in place with the integrated pin so it doesn't move around.
Features:
Specs:
Easy to Adjust the TV Angle
When it's a nice night and you want to unwind with a good movie outside your RV, you can horizontally slide this 20-1/2" out of your pass-through cargo compartment. Or if you have the interior wall space for it, and your TV is tucked into a corner, you can slide it to where it's easier to see the screen.
And no matter where you've set up your camping chairs, you can swivel the mount up to 180 degrees for the perfect view - no more craning your neck or missing the best part. Once you've positioned it to where you want, it'll automatically lock in place with the integrated spring-loaded pin. This prevents the TV from rattling around during the movie, especially if someone's walking around inside your RV.
How to Measure Your TV for VESA Mounting Patterns
VESA is an industry standard for measurements given in millimeters used to mount TVs. Most modern TVs use this standard, but you need to know your TV's mounting pattern to select the correct mount. To find this pattern, use a ruler to measure the distance between mounting holes on the back. You can measure in centimeters, keeping in mind that 10cm equals 100mm.
This diagram illustrates the compatible VESA mounting patterns of this RV TV mount:
If your TV's mounting pattern requires a different configuration, you can use one of MORryde's TV mount adapter plates (MR43ZR - sold separately) to get the right fit. The plates are installed on the mount to adapt for TVs that call for a 300mm x 300mm or 400mm x 400mm VESA pattern. Be mindful of the mount's weight limitations.
Customer Satisfaction Score:
86% were satisfied with this product
14% of customers were not satisfied
Ratings & Reviews
Rear spring hangers broke off of my triple axle toy hauler. Repared/upgraded hangers with thicker hangers and Vee braces. One of the equalizers was also broken. Researched options, found the Moryde system best fit my needs. Also installed upgraded wet bolts and shackles. Really straight forward install. Would strongly recommend the use of heavy-duty ratchet straps to aid in moving axles back into position. Did it as a one person job.
Great product even after 1 year. I grease the wet bolts a couple times a year with ease!
They are better than original. They have bronze bushings instead of oem plastic and they are greaseable. The most important part to me is that I was able to call etrailer and tell them about my need for these with the Road Armor and they were able to tell me which set to get. This modification allows me to pull the trailer safely and without issue down the road.
Bought this kit when I was replacing a broken leaf spring on my tiple axle toy hauler. It's an exact match to the OEM suspension.
The installation went well. It took me about one hour and twenty minutes to install the MORryde CRE3000 and the shackle kit on one side because I was cautious, making sure I installed it correctly. The other side went much faster, completing it in about 30 minutes. I am looking forward to seeing how the camper responds to rough roads.
I replaced my shackles on my tripple axle trailer with heavy-duty ones from e trailer, while I was at it I replaced all the equalizers and added wet bolts and brass bushings. I had never done work on a trailer Suspension before but with the help on e trailer I got it done. I no longer have my shackles flipping over and my boat trailer pulls like a dream. E trailer is great to work with and very helpful. I will definitely use them again when the time comes
Bought these to replace existing shackle straps on my travel trailer that had warn dangerously low. These shackles were twice as thick as what was on the trailer at delivery. Very easy to install (save some time and make sure the ground is level) and don’t forget to grease!
This was a great upgrade to the OEM suspension components on y travel trailer. The trailer is only 18-months-old, but as you can see in the video, the original suspension was completely shot after about 20,000 miles.
The kit replaces the OEM nylon bushings with bronze, and more important, contains wet bolts with zerk fittings. The shackles are much more heavy-duty than the originals. The kit was easy to install in an afternoon.
I always wanted to replace the stock shackles with this MORyde kit. Fit as expected and am looking for a long life out of the new shackles.
Everything was as listed and packing was done really well. I did have leftover bushings as the MORryde pieces have the bushings already pressed in. Seems like there was a waste of parts as you cannot use these bushings to replace the ones installed in the MORryde kit.
There's really no comparison as to how much better this shackle kit is. The original plastic bushings were totally disintegrated. Took the 5th wheel for a test drive after installing these and now with the wet bolts installed the suspension is 90% quieter when negotiating my serpentine driveway!
My 2019 Coachman Freedom Express Liberty 320BHDS was chewing the inside treads of tires regardless of rotations. Thanks to Kyle B and Daylon H, your team quickly diagnosed the issue and recommended this suspension upgrade including new 6000lb leaf springs, u-bolts, equalizer and the MORyde wetbolt hardware kit. Installation took the better part of a weekend, but was a complete success. Be mindful of the torque specs and ensuring your RV is properly supported (including axles). Thanks to some recently cut stumps, I was able to support boths sides of the axles to safely torque bolts to 80lbs. RV rides about 1.5 inches higher, but nice and smooth. No noticeable camber with the tires now. Time will tell, but sincere thanks to Kyle and Daylon for taking their time to view my photos and answer questions.
This bracket is worth every dime.
Easy install, fits the TV, and absolutely secure during travel which is major reason for purchase.
Just recommended it to a friend who ordered it yesterday.
Always timely deliveries and great customer service.
built well and works great for storage area in 5th wheel. I used 40 inch tv which worked out perfect.
Works great
This mount is very heavy duty...in fact, it's heavy PERIOD! I looked at this mount and the mount with the adjustable base. I couldn't justify an additional $50 for some brackets that adjusted to the length necessary for your particular RV so I bought this mount and cut some 2x4's, painted them black and used them to obtain the proper length to clear the side of the storage door. I tried to install a 43" tv in the front storage compartment of our Montana but it was about an inch too wide. I returned that tv and got a 40" that should install just fine. I also got two 6' cables so I can hook one up to the Cable/TV connection and another to the Satellite connection. I'll route both to the tv and lable them so I can change them easier when that opportunity arises. (It's going to be difficult to say the least to get to the tv connections in the storage compartment once the tv and mount is installed). As I said, this mount is very heavy duty so additional steps will be necessary to support the weigh to the mount. All-in-all, a very nice mount.
Works as designed
Do you have a question about this RV TV Mount?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gwendolyn Y.
9/18/2025
Love to hear it, Campin Clas-sy! What's your favorite show to watch?