
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customize your vehicle with this rustproof, stainless steel bumper insert. The bar design and black finish offer a custom look. Insert fits over your existing bumper grille.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our 2015 Chevrolet Silverado 2500, we're going to review and install the Putco bumper insert, part number P87195. Now here's what the Putco insert's going to look like once it's installed. The insert itself is steel and has a really nice painted finished to resist rust and corrosion. Not only does it dress up the front of our truck and really make it look good, but it provides additional protection from things such as road debris, rocks and such from getting through the opening here in the bumper to our cooler. Now let's go ahead and show you just how easy it is to install. To begin our install, we're going to go ahead and open up the hood. We need to remove the fasteners here for the front cover.
To do that we're just going to take our flat blade screwdriver, we'll get underneath the center of the fastener, pry it up, then remove it completely. Now I can go ahead and repeat this same process for the other 11 fasteners. Now once we have all the fasteners removed, we can go ahead and take the cover off and set it aside for installation later. Next we'll remove the four 10 millimeter screws across the top of the grill. All right, now we're going to pull the grill out, away from the front of the truck and release any fasteners underneath. Once we have all of the fasteners popped free, we can go ahead and take the grill off the front of the truck.
As we turn it over, we can see the fasteners that we're securing it underneath. Now our grill insert's going to have a total of four attaching points. The lower two attachment points are going to reuse two of the manufacturer's bolts. They are here just at the bottom of the opening in the bumper, approximately four inches from the corner on each side. Now the head of each of these bolts, it's just a 10 millimeter. We'll hang on to the manufacturer's hardware as it will get reused for installing the insert. Now our top attaching points are going to reuse pre-drilled holes in the sheet metal, approximately two inches from the opening in the bumper.
To create this attaching point, we're going to use the clip nut provided. It'll slide over the sheet metal and lock into place at the pre-drilled hole. Then once our insert is installed, we'll put in the bolt and split lock washer. Keep in mind our attachment points here on one side will get repeated identically on the opposite side. We're now ready to install the insert. The insert will slide in just behind the bumper.
Be careful to work it in place, to not damage the cooler. Now once we set the insert in place, we'll go ahead and install our hardware. Got our new bolt going into the clip nut here at the top fastener, get it started hand tight first. Then reuse the manufacturer's bolt for the bottom fastener. Once we have all our hardware in place, we'll go ahead and tighten it down. We're now ready to go ahead and reinstall the grill. Just like that, our insert is installed, we're ready to hit the road. That will do it for the Putco Bar Style Bumper Insert, part number P87195 on our 2015 Chevrolet Silverado 2500.
Ratings & Reviews

Josh M.
12/14/2017
Holding up great. No issues.

Chris
11/3/2020
Working and looking good.

Arthur H.
4/12/2020
Great product. I don’t have to worry about a stray objects flying into the opening in my front bumper, finish is holding up well. 2018 Silverado LTZ Z71

Steve
6/10/2021
Pluto grill has been on my 2016 Silverado 3500 for a year and approximately 6000 miles of travel. Lokks and works as the day I installed it, and no rock chips in the finish.....very satisfied with this product

Danny F.
3/25/2021
it worked out perfect and looks great.

Robert
10/9/2019
Still looks like new, etrailer is great!

Kirk B.
9/18/2021
Still looks like new. Great product
Do you have a question about this Truck Grille?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.






Patrick
1/7/2020
The grill has been perfect, no movement, no rust. Best off it finishes the looks of the front of truck. Best instructions.