To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These tie-downs mount directly to your truck’s frame, giving your camper the most solid base possible. By connecting to the strongest part of the vehicle, they keep the camper’s center of gravity low and distribute weight evenly across the bed. That means less sway in crosswinds and a more confident feel on long trips or rough roads. The result is a setup that stays secure while you drive and handles like it should.
When the road trip’s over, you can pull the arms right out of the brackets and keep your truck’s clean appearance. The brackets sit nearly flush with the underside of the frame, so they’re barely noticeable when you’re not hauling. It’s a practical design that keeps your truck looking good all year round.
These front tie-downs bolt onto existing holes in the frame, so there’s little to no drilling and no cutting required. The custom fit keeps them tight to the frame with minimal loss of ground clearance, making them easy to live with whether you’re hauling or not. All hardware comes included for a solid bolt-on setup.
Made of black powder-coated steel, these tie-downs are built to handle rough weather and hard miles without rust or corrosion taking hold. The tough finish adds another layer of durability, so they stay strong trip after trip.
Each arm has two pin holes for adjusting reach and clearance around fenders or sidewalls. The attachment plate also offers two anchor points so you can find the best angle for your turnbuckles (sold separately). This flexibility helps keep tension even and your camper locked down tight for safe travel.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today, we're going to be taking a look at TorkLift's line of custom frame mounted camper tie downs for the front. You want to verify here at etrailer.com using our fit guide, which ones work best for your vehicle. There are sets also available that will fit your vehicle available for the rear. These custom mounted brackets are going to provide an easy attachment point to hook up your camper.What's additionally great about those is that they have the removable ends. So when you're not using it, they'll be hidden away, and your vehicle will look like factory. The custom mounted brackets we're engineered to provide you with the best location for your tie down point to even distribute the load.
So, once they're attached, and adjusted. This'll keep your camper from being too top heavy. This'll increase the overall ride quality while you're campers attached, and the safety. It's made of a durable steel with a black powder coat finish, which'll ensure that you have a strong attachment point, and it'll be highly resistant to corrosion.When you are ready to use them, you can just slide in the attachment point. There's two points here to attach your turn buckles, and here on the shaft there are two points that will give you an adjustment inward, and outward, to specifically fit your camper.
So, you can use this hole for a wider camper, or this hole for an aero camper. Once you've got your appropriate hole, slide the pin through, and bring the latch over, and lock it in place. Then you can attach your turn buckles.Now if you need some turn buckles you can pick them up here at etrailer.com. There are many a different styles. From chain types, to quick attach lever types.
Our style is going to a be a threaded rod type that will hook to your camper, and down to our attachment point. We'll adjust it snug by turning our turn buckle here. With our passenger side done, we'll repeat that same step on our driver's side.Compared to stake pocket, our bumper mounted camper tie downs, frame mounted tie downs will provide better handling. They also mount out of sight, giving your truck a cleaner look, because the custom fit brackets secure tight against your trucks frame there is no loss of ground clearance. That completes our look at TorkLift's line of custom frame mounted camper tie downs for the front..
Ratings & Reviews
Mark
6/6/2025
These tie downs are sill working as advertised. I have travelled over 20,000 mi with them in various conditions with about 10 of that time in dirt roads or 4wd roads. Nothing too crazy, but with my camper and these tied downs I am confident that the camper will remain attached and be secure. It hardly moves around at all. They are worth the money and I can still remember how easily they installedvery welll thought out design and installation!
Jon G.
6/6/2025
Heather A.
5/1/2026
Hi Jim! I can see why that would be frustrating for sure. The good news is you usually don’t have to do anything drasticmost fixes come down to slightly repositioning the exhaust system rather than fully relocating it. That can mean loosening and adjusting a bolt-on hanger, adding a small spacer, or even tweaking the hanger position just enough to create some clearance. I’ll drop this article here since it walks through a few simple ways to fix it step-by-step, but overall you’re on the right track it’s typically just a matter of giving the exhaust a little more room so nothing is rubbing or under tension. This help article is about a hitch install but it still applies here.
Helpful Links
Lazer S.
12/30/2025
Glad to hear you are liking them, Milton! And I agree, the TorkLift tie downs are superior to the HappiJac tie downs. They are just more secure and heavier duty. At least in my opinion. And that sounds like quite the trip! Was it just a camping trip or did you do some fishing and or hunting?
Jenny N.
12/5/2022
I reached out to the manufacturer. They advised that they think it is a combination of the Northern light camper anchor point location being situated so far back on the camper and possibly the front of the camper not being all the way against the bulkhead of the bed if it is moving forward still. Otherwise, everything looks typical of a truck camper and truck installation. If it has any room to slide forward, it will in a sudden braking situation.
Albert
12/6/2022
Jenny thanks for your reply and diligence in reaching out to TorkFit. The NL camper does have forward bumpers for abutting the bulkhead. However when bulkhead contact is made the body of the my 21 Silverado makes contact with the fiberglass body of the camper. The pressure from a recent ‘sudden stop’ and ‘slide forward’ created enough pressure to chip paint on the truck. The bumpers make contact with the bulkhead about 10”-12” above the bed-bulkhead connection. The 90* corner at bottom, this should be the strongest area. I will install stop chocks at future loadings. I’ll also attempt to possibly install the TorkFits in a more vertical position. Thanks.
Charles F.
5/24/2021
A year later and I couldnt be happier! I stand with my previous review 100
Dot
7/16/2023
A year later, I just got back from camping trip. I love the easy set up of these hitches. I’m a 65 year old woman, and I can put these mounts on my truck in less than five minutes. Then, another 10 or 15 to put the chains and turn buckles on, make them tight. I usually drive about 5 miles maybe 10, go get gas, and give all the chains a shake to make sure they’re still tight. If not, spin the turnbuckles a time or Two. And off, I go. I am extremely happy with this investment. Of all the things I bought after buying the camper, this has brought me the most security and feeling of safety. Good luck, happy camping whatever you decide.
Scott
12/1/2025
It was an easy install, and they have worked with out flaw. I would recommend torque lift products to anyone installing a pick up camper. 2018 F 250 short bed crew cab.
Reed
4/12/2024
This is a very superior product. It was easy to install and is very functional and looks great. I highly recommend this product. Very well made and designed.
Jesse M.
5/10/2024
Louis
8/4/2024
Couldnt ask for anything better. I am using them on a regular basis. When not in use I remove, clean and store them in my garage. No rust issues and the brackets attached to the truck are just as solid as when I first torqued them to the trucks frame. I definitely recommend them to anyone looking for proper camper tie-downs. PS: Their customer service, as always, I outstanding!
Do you have a question about this Truck Camper Tie Down?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike L.
10/29/2026
Thanks John, we sure appreciate that! I'm glad to hear your tie-downs are working well for you...