Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Durable rubber, jaw-style clamp with adjustable strap helps you store and transport fuel bottles, small fire extinguishers, and more. It mounts horizontally or vertically to your vehicle, trailer, garage wall, or any flat surface. 50 lbs WLL.
Features:
Specs:
Note: Quick Fist clamps are not to be used on exhaust pipes or any pipe that consistently exceeds a temperature of 180 F (82 C).
A new Quick Fist clamp fresh out of the mold can be stiff. Use two hands to open the jaws vertically and then pull each jaw once or twice. Close the jaws and open and close the strap a couple of times. It's now ready for mounting.
For applications where the Quick Fist clamp will be used at or near its maximum opening dimension, the clamp will not work in your hand, as it must be bolted to a fixed surface for the rubber to stretch properly.
Mount your fire extinguishers and fuel bottles using the Quick Fist 3" clamp.
1. Using the template above, drill 3 x 1/4" (6 mm) holes. The outer two holes need be about 1/8" (3 mm) deep. The two protrusions on the base will keep the clamp from turning while in use. Use a 1/4" bolt or screw and a washer to mount the Quick Fist clamp. Do not over-tighten.
2. Mount with the strap facing in any direction.
3. To clamp: put the nozzle between the jaws and push the strap to reach the desired tightness. Repeat as necessary.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
What's up everybody It's AJ with etrailer.com. Today we're gonna be checking out the Quick Fist Clamp. So it's gonna be a rubberized clamp system where you can put an object in there, bring this around, and it holds it really tight. Let's check it out. We mounted it inside of an enclosed trailer today just to show you how it works. This is undoing the latch, now it will slip down at that point because it's not pushing in on it, but still has a good hold on it right away when you put that in there.
So you just wanna bend out the outside of the clamp to remove it. There's no moving parts, I like that. There's nothing that you have to add on to worry about breaking off. It's gonna be right here when you need it. So you can quickly just put your item right back where you got it, and then pull the strap over these notches, and that's what holds it in there.
Take a closer look at the clamp here. It's gonna be made out of a heavy duty rubber. It's really easy to remove the item or put whatever you want in there. Great for fire extinguishers or fuel canisters. Now you can also just pry the jaws apart when you go to put the item in there, and then you just pull the strap over the notches to tighten it up.
It's gonna be really easy to use, made out of a heavy duty rubber. Just pull the strap here out of the notches to release whatever item you put in here, and then you can just push the jaws apart to take it out. So we have a fire extinguisher in there right now, also will work with a fuel bottle. You just do it in the reverse order. Bring the jaws apart, they close in around the item already holding it tight.
Now it's still gonna slip until we take this strap, put it back in one of the notches to tighten it up. So we need to go just a little bit more. Goes in there really easy. I like that everything's contained. There's no moving pieces, no separate pieces, it's all right here. Now it's gonna work with objects that have a diameter from 2.75 inches all the way up to 3.25. Also has a safe working load limit of 50 pounds. It's gonna mount really easily to the inside of your trailer. You're gonna have to get your own hardware. So you're gonna to get your own screw and washer, and it's recommended to use that, that way it's spreads out and holds it tighter. If you're trying to just do it the screw, it's not gonna be sturdy enough. So with that in place, you can see this is me shaking it back and forth. It's not going anywhere. Overall, I really do like this system. The jaws hold the fire extinguisher really tight and keeps it in the same spot so it's not rolling around everywhere. Especially with something like this, you're gonna be able to get it out quickly and use it when you need it. Well, I think that does it. Thanks for hanging out and hope this helped.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
Ratings & Reviews
Harold B.
6/25/2022
Out in the Florida Sun ever since I got them. Haven’t shown one sign of wear. 100 satisfied. Great buy!
Anthony
10/31/2021
Absolutely PERFECT!
Do you have a question about this Tie Down Strap?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ed
5/31/2023
It ism great. I used it to secure the wheel jack in a storage compartment in a camper van. It holds the jack very secure and is easy to remove the jack when needed. Was able to store in a vertical position allowing more storage room. Great product.