You shouldn't have to climb into the cargo area just to pull a cooler from behind your bins. This slide-out tray brings cargo out of your rig so you can grab what you need. Bolts to factory mounting points with included hardware.
When your cargo area is loaded with a cooler, tool case, recovery gear, or a kitchen setup, reaching the items behind it can turn into climbing in or unloading half the back. This sliding tray pulls your stored gear out to the rear opening, giving you full slide-out access instead of forcing you to reach deep into the cargo space. Loading, grabbing, and packing back up take less effort because the gear comes out to where you're standing.
The tray gives your cargo setup a dedicated platform for planned loads like storage bins, coolers, tools, recovery gear, or camp kitchen items. Its 31-1/2" wide x 26-1/2" deep deck gives you a defined space to arrange the items you need to reach often, while the 250 lbs capacity provides plenty of support. Your gear stays within reach and the cargo area works better for packed trips where the same items get opened again and again.
A slide tray can become a problem if it blocks the storage spaces and tie-down points you still use. This tray is compatible with underfloor storage and factory tie-down points, so your cargo area keeps those practical features in play after the tray is mounted. You can organize gear on the platform while still working around the cargo features that help keep your setup useful.
Loaded gear feels very different from an empty tray, especially when you're pulling out dense tools, a packed cooler, or camp supplies. The heavy-duty slide mechanism is made for regular use, and the tray mounts securely to the cargo floor to support stable operation. The tray moves the weight out where you can handle it, making repeated access during trips feel more controlled and practical.
Installing a cargo tray is a lot easier to commit to when you don't have to drill into the cargo floor. The bolt-on kit uses existing mounting locations, giving your setup a secure mounting path without permanent modification. Once it's installed, the tray is fixed to the cargo floor for stable operation and your vehicle isn't locked into a one-way modification.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone. Steve here with etrailer. Let's take a look at the MORyde cargo area sliding tray. Folks, this is gonna be for a 2024 through '27 Ineos Grenadier. So folks, this is gonna be a great feature. You're gonna get a full slide out access from the tailgate area.
So when this is installed, you're gonna be able to access those coolers, tools, bins, gear, whatever it is with less climbing into your cargo space. This is going to reduce those deep reaches deep inside while you're loading, unloading, and that can just be tedious and hard to do a lot. So come up to the front here. I do wanna point out from the get go, I just literally have these side brackets that are custom for that Ineos Grenadier just laying here on the table. They're not technically bolted.
The tray's gonna come in its own box. You're gonna get the two side brackets in a box along with the hardware for mounting it to the Grenadier. And you'll literally undo the hardware on the tray and then you'll reattach those nuts over these pre-drilled holes down the side of the bracket. And then from there, each side's gonna get two of these special attachment nuts. And these are made to go directly into existing mount locations.
That way you're not gonna be worrying about drilling into the cargo area of your floor. So again, all you have to do to operate this is literally depress both blue levers on both sides. And then you literally can get a full pull. I'm gonna zoom out so we get the full effect here. You're literally gonna get a full pull all the way out, and I'm just being gentle because I'm limited over there.
And if you heard it, it clicked, right So it clicked, it locked into place. Now if I want to, after I got my gear or I'm loading gear in, I have to depress both sides again, and then carefully push it back in and it'll lock back into the locked position. Again, I had to be careful just because it's not technically bolted in place. You heard it locked back, okay. Again, folks, this is a great option for you. 250 pounds of capacity. It can handle loaded coolers, gear, toolboxes, those kind of things, heavy packs, moving boxes, cargo bins, et cetera. And as far as some dimensions, I'm just gonna give you the inside usable dimension here. The basket itself, I got 29 and 1/8th inches wide. And from front to back I got 24 and 3/4 inches deep. Again, folks, this is a great option for you for all your gear, not having to reach back inside of the Grenadier. Folks, this is the MORyde cargo area sliding tray. I'm Steve with etrailer. Thanks for watching. And if you need help installing this, then you can use our install link below, install locator link below. And based on your zip code in your area, we can pair you up with some trusted etrailer shops in your area. Thanks for watching.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.