Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Create ambience on your boat with this mini, 1-3/4" x 15/16", waterproof LED accent light. Emits 90 degrees of blue light for step, walkway, or courtesy lighting. Recessed-mount installation with surface-mount flange and included cover.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this TecNiq Recessed Mount Waterproof Blue Mini LED Boat Accent Light. Now, this is a mini LED accent light that'll provide a nice bright blue light for your boat, so it is also great for upgrading or replacing your area light, step light, underseat, engine compartment, and even walkway lighting. Has a nice, clear high clarity lens, and it provides 90 degrees of lighting, so when it's mounted, you can see, like this, the light will shine directly down. It is a nice sealed waterproof housing and lens unit, has an IP68 rating. If you noticed, the lens itself has a clear lens and it's over one blue LED, and if you noticed, it has the black cover right here.
Now, at the end of this video, I am gonna connect this light to some 12 volt power just to show you how bright the light is and the color, but I first wanna go over some of the features of it. It is a premium LED, which is energy efficient, long lasting, and vibration resistant, it is rated for up to 100,000 hours of operation. They do use a military grade construction of the circuit board on this light, which means it uses urethane potting, which gives you better protection than the common epoxy potting. It is compatible with 12 volt DC system. As you can see, it as a recessed mount installation, has the surface mount flange.
So basically, requires a 3/4 inch diameter hole for this light to fit into, and then the surface mounted flange goes up against the surface, and it requires also two screws for installation. Now, the distance between these mounting holes, center to center, is 1 1/8 inches. This does hardwire to your application, it has two wires in a nice protective sheeting, a power and a ground wire, and the wire length is about seven inches. We'll do the dimensions and then hook it up. But basically, the length on this, from one end to the other end, it's about 1 3/4 inches long.
The diameter, bottom to the top, is about 15/16 of an inch. And the total depth is also gonna be about 15/16 of an inch. Input voltage, 9 volts to 14 volts. And we'll go ahead and hook this up to our power now. Once we get it all hooked up, turn on our 12 volt power, and there you can see the single blue LED.
I'm gonna go ahead and turn off the overhead light. You can see there's a nice, bright blue light to it, and you can see, as I mentioned, that when it's mounted like in that position, you can see that the light goes directly down 90 degrees. Lights up very bright area, large area. I wanna the zoom out just to show you from a distance how much light it does give off. I'm gonna zoom back in. I'm gonna turn off the overhead light or them back on. Turn off our power. But that should do it for the review on this TecNiq Recessed Mount Waterproof Blue Mini LED Boat Accent Light..
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





Mike
4/2/2023
Hi letting you know the led light was a perfect fit and works as it should. Thank you