Bike Tools

This portable stand lets you make on-the-go repairs to your bike. Adjustable, padded clamp holds your bike by the frame or seat post. Included tray keeps your tools organized and close at hand.

Folding tools are fine for quick fixes, but they can twist in your hand or slip off when you're trying to reach bolts deep in a frame. This T-handle set gives you the reach and control to properly torque crank bolts, rotors, or brake mounts.

Stop the creaks and keep your setup solid. This 2 to 12 Nm torque wrench helps you tighten common bike bolts without stripping or crushing parts. Includes 10 bits and a metal case for tidy storage.

Silence the creak and ride on. This compact 4 to 6 Nm torque tool helps you snug stems and seatposts without crushing parts. Bits store in the handle, plus extra space for tiny essentials.

Use the proper screwdriver for adjusting cross-point screws on your bike's derailleurs. Screws on most bicycle components were designed for a shallow JIS-standard screwdriver taper. Enjoy better control from the textured grip and magnetic tip.

Stable wash and work stand has a spinner-knob clamp that holds bike tubes up to 1.9". Adjustable-height clamp rotates 360 degrees to hold bike at any angle. Folds up for compact storage.

This bike maintenance tool doubles as a cable cutter and an endcap crimper. It lets you cut brake and derailleur cables quickly and cleanly, and it allows you to split wire housing. Crimper lets you secure caps to the end of a brake cable.

Shorten your bike chain by driving a link pin out with this chain pin press. The tool has a comfort grip that provides great control, and the drive pin is powered by the high-leverage paddle handle. Pin-driving compatibility with 1-13 speed chains.

This 3-mm hex wrench lets you install, remove, or adjust the cable guide bolt and more on your bike. T-handle design with 3 heads lets you work at low and high torque levels. Durable, chrome-plated steel construction resists corrosion.

Make it easier to clean and lube your chain with your rear wheel removed. Simple but effective chain keeper for use on your road, mountain, or gravel bike that has a 12-mm rear thru-axle. Your best option for shipping or traveling with wheels off.

This T25 Torx wrench lets you install or remove Torx-style bolts on your bike. T-handle design with 3 heads lets you make adjustments at high and low torque levels. Durable, chrome-plated steel construction resists corrosion.

When your tire feels off mid-ride, preset your PSI and inflate your Presta-valve tire with CO2 so you can get back to a pressure that feels right instead of guessing with your cartridge.

This CO2 dispenser lets you add air on your bike tire using a CO2 cartridge. High-quality rubber seals and compact dispenser head saves space and weight.

Making precision adjustments on smaller screws found on bike parts is made easier with this 3-mm wide flat blade screwdriver. Many recessed derailleur screws require the narrow tip, and the tapered, textured grip provides control with dirty hands.

When you get a tubeless flat mid-ride, this tool lets you plug it, preset your CO2 pressure, and top off your Presta-valve tires so you can get rolling again fast. What once was a ride-ending puncture becomes a quick pit stop.

This 3-way hex wrench lets you adjust your bike's brakes, install or remove your cassette cog, or tighten your seat post. Durable steel keys extend from polymer core with a soft rubber grip. Embossed labels ensure easy identification of each key.

This dual-purpose bike maintenance tool works as both a lever for safe tire removal and a spreader to keep disc brake pads separated while your wheel is off your bike. Sold as set of 2.

Keep this 4.5-mm flat blade screwdriver nearby for general use. Perfect for minor bike adjustments or any task around your house or garage. Magnetic tip and comfortable, textured grip make every job easier.

This chain keeper keeps the tension on your bike's chain after the rear wheel has been removed. It's great for bike maintenance, washing, travel, and storage. Compatible with standard quick-release and 12-mm thru-axle dropouts.

Versatile 2-way ratchet handle system can also be used with the 5Nm fixed-torque extension for properly and safely fastening many common bike bolts. Easy to carry and use, the Reflex kit can be stowed in a jersey pocket, hydration pack, or seat bag.

This 2.5-mm hex wrench lets you adjust your seat post, pedals, and gripshifters on your bike. T-handle design with 3 heads lets you work at low and high torque levels. Durable, chrome-plated steel construction resists corrosion.

Keep your bike's disc brake rotors aligned with this truing fork tool. Overcome the main reason your rotors rub unevenly on your disc brake pads by using the slots on the tool to gently straighten a rotor. Works with 2.0 and 2.3 mm thick rotors.