Most Popular Plastic and Metal for Van

I just installed this vent less than a week ago. I’m just hoping the metal vent versus the plastic one I originally had on the trailer will hold up to the weather longer.Only time will tell though. The edges of the metal around the roof flange are razor sharp. I cut my hands three or four place's. If there’s any way the factory can round these edges off better so they’re not quite as sharp.

It arrived in the expected time. It installed and worked as described. The specifications allowed me to have the right hardware and adhesive on hand for installation. Still not leaking and didn't even dent with some hail that left marks elsewhere. I am glad I went with the metal vent vs the plastic that disintegrates in the sun and is destroyed by hail. This is what I will use to replace future vents. The price to value is excellent.

Ventline Ventadome Roof Vent 14 1/4X14 1/4. Shipping was prompt, product arrived intact. Had to get the #10 stainless screws to install (expected them to be included) plus the butyl tape and lap sealant which I knew from the description I'd need to buy seperately. The install went without any issues. I was expecting it to fit with no trimming but ended up needing to trim each corner on my 14 1/2 inch opening. My roof thickness was right at 1 inch so needed to trim down the trim strip. How will it do in a driving rain? To be continued.....

This vent is well made and assembly was very easy. Installed with a liberal bead of flex seal caulk and flex seal aerosol as final sealant.

Product description, fitment, construction materials, size, all matched the website. Very good product for replacing your vent on a trailer. Excellent support and shipping from company.

Installed this vent into my Haulmark Transport 6'x12' enclosed trailer. Installation was easy, I cut a 14.25" x 14.25" inch hole between two crossmembers in the roof and dropped it in place. Because the roof on this enclosed trailer is so thin, I used a piece of 3/8" plywood so sandwich between the interior garnish and actual vent. I cut the same size hole into the plywood and left a 2" lip all around. I use 28 #8 x 5/8" stainless screws to hold it in place, pre-drilled with 1/8" bit. I then used roofing tar to seal the vent and put masking tape all around, leave 1" from the flange to ensure good coverage. I then removed the masking tape, leaving nice clean lines. Interior garnish is held in place by #8 x 3/8" galvanized screws. Huge kudos to etrailer for carrying such awesome products for great low prices and offering super cheap shipping to Canada!

My order arrived more quickly than I expected and in good condition. The included single piece of paper (instructions) are absolutely useless. If you haven't done this before, watch a video or two before you start. My vent now works and I'm a happy camper. etrailer came through again!

This fan has worked great for my motor home. If you need a stronger breeze, this may not be the fan for you.

This part was a direct replacement for what was broken in my toy hauler. It was easy to install and I have had no concerns since it was installed.

This vent fan appears to be of good quality comparable to the original.

Vent was easy to install, really didn't need the instructions. I would have appreciated a template for the hole though. That way I can just throw the template up and cut along it. A recommendation to reinforce the underside with something (I used 2x2s) might be helpful as well. You do say to align it with a joist, but who's really going to have multiple joists within 14 1/2" from each other? Otherwise, it looks great. I figured you have multiple images of the vent itself so I figured an image of how I reinforced it would be the most helpful for future installers. Thank you. Aaron

Product material and build is solid. Easy to install. I like the smoke colored cover, lets in the right amount of sun (we dry camp in the Southwest a lot). The fit between screen and frame with the open/close knob was off by about 1/4 inch in depth. Was able to adjust the knob mounting position down so as to insure a tight fit between screen and beauty ring. We have an eighteen-year-old rig, so it is challenging to find replacement parts that fit as original. But it fits great now! great web site - easy to drill down to appropriate parts. Thanks again.

I purchased this to replace a faulty one I’d installed earlier. The previous one (same model) was only installed within the past month and never opened (vent on roof) because it rained every day. I was able to install during a few hours of dry weather. Was on a long road trip and when I returned home I discovered there was no vent cap (white plastic top that opens). Upon examination, the hinge spot welds had broken at the hinge allowing the cap to be a donation to I-84 either Washington, Oregon, Idaho, or Utah. I didn’t notice until we arrived home. We did a marathon drive from the USA/Canadian border to Utah, basically stopping for fuel. I’d give it 4 stars as I’m waiting to see how it works out. Installed this new one today. Fairly easy project. Pic is the frame that had the spot welds break.

This was an exact replacement for my broken roof vent. I watched the videos available on the website and felt pretty good about swapping it myself. It arrives today. I took out the old one and put in the new one in about 30 minutes total. The roof vent install kit made it easy to ensure it was water tight.

The ventline roof vert is just a little better than having nothing. I installed it to fill the hole where a RV roof air conditioner was. The fan motor is very weak and does not move hardly any air. Also the plastic cover that cranks up is very light and is not heavy enough. It vibrates awful going down the highway. It is very annoying. No way does it compare to a fantastic fan that are in RVs. But it did fill the hole from the air conditioner.

Excellent service arrived quickly, just as I had ordered. Thanks

I received the product today. Customer service to this point has been excellent. It will be about a week before trailer repair folks will be here to install, however, I did open and inspect the product. It was not protected in the box and is wedged into the box. I pray it will not be damaged.

Good replacement product for my RV power vent. Fast shipping too! And a great price.

Fan arrived in good shape on schedule. There were no wiring instructions or mounting hardware

I am very pleased with the quality of the vents. The prices were good too. Very happy with my purchase and how quick the vents came. Thank you