# 1
B&W Tow & Stow 3-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black
Gone are the days I need to carry three different hitches with different sized balls on them. Gone are the days when I, or others, walked around the back of my truck and cracked their shin on a protruding trailer hitch. I keep this folded up in front of the drop where it's not going to catch anyone by surprise. When I'm ready to use it, I simply pull two pins out which allows it to drop free and rotate out. I choose the height I need and install the two pins/clips. To rotate the balls, again simply pull the third pin and rotate to desired size. It was more than I wanted to spend at the time but since I'm glad I spent the money.
Very impressed with it. It is a really solid hitch Probably overkill for my F150 and 10' utility trailer, but rather have it and not need it, than to need it and not have it.
# 2
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
Makes for a great hard-core dirt road set up with a 3000 pound trailer, in conjunction with the Curt rocker ball, Towing with an F150 over many miles of washboards, down through washes where the road was washed out, etc. Really makes for a gentler set up on the equipment in the trailer and the truck. Thanks a lot E-trailer!
My usage of your hitch is a bit unusual, I think. I pull a two ton roller with my Ram and I've used your cushioned hitch to smooth out the process. The roller Lunette just dropped over a 2" ball and then banged and jerked on the ball neck. Check out the photos for my adaptation.. I can flip it over and use the 2" ball! Have enclosed some photos. The cushion is holding up very well and it takes a beating!! Thanks
# 3
Flash Secure Adjustable 2-Ball Mount w Chrome Balls - 2" Hitch - 6" Drop, 7" Rise
Very strong, easy to install and very secure. Yes a bit pricey, but well worth the money. I did notice there was what I thought was an unusual amount of play in the receiver. I called etrailer and Marcia was so very helpful and very concerned that I may have received the wrong product. She even called the manufacturer and found out what the changes that were made by the manufacturer which made the pictures incorrect. My hat is off to Marcia and all the folks at etrailer
ball mount fits loosely in the receiver so that the pins that extend out from the ball mount shaft through the holes in the receiver don't extend out far enough, for my liking. This is because since the ball mount shaft has so much play, it will shift to one side. Then, the pin on the other side does not extend all the way out of the hole so that it is not flush. True, i am being paranoid. However, i imagine a case like a crash where enough force could pull the shaft out from the not fully extended pin side to release the trailer to wreak more damage. I would just feel more secure if the pins went out further through the receiver or the shaft was not so loose. Otherwise, i really like the product a lot... enough to give it four stars... :o)
# 4
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black
I liked the hitch just fine. I was hoping it would allow me to stow it and the be able to use my step in my GMC sierra tailgate but that won’t happen. I almost damaged my back up camera when checking it out. I am glad I did before assuming it was out of the way. I still like the product and will still fold it up when I need to.
The 3” drop is perfect for a stock 4x4 Silverado 1500. I can tow my small trailer as well as my full size tandem axle trailer without changing hitches/balls. Just what I wanted.
# 5
Convert-A-Ball Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 10,000 lbs
Good, very solid ball mount with just the extra rise I needed, 2 3/4", to get level trailer and good clearance for the trailer jack. But excessive shipping charges from etrailer, $[XX] for an $[XX] purchase. Found out to my cost later that [online vendor] would have shipped for free.
As a full-time RVer, e-shopping is very important for us. etrailer was the right place to shop. Right product, delivered on-time for a great price. You beat the local discount RV store by $25 including shipping. At the same time, I had another outfit send me a clearly inferior product to the one they displayed. Said they would e-mail a pre-paid shipping label for the return (didn't) and tried to put the blame on Amazon. Thanks etrailer for a great experience !
# 6
Brophy Ball Mount for 2" Hitch - 3/4" Rise, 2" Drop - 13-1/4" Long - 10,000 lbs
The hitch and the trailer ball with the hitch was perfect for making my trailer level behind my vehicle
Shipping was a mess, lost the first one in the mail somewhere because no one thought a 50# hitch would punch through cardboard. It is working as expected, but does not seem to be a true 2" drop.
# 7
Curt Solid 2-Ball Mount for 2" Hitches - 2" and 2-5/16" Balls - 10K - Black
Very solid.. great product !!!
This thing is very solid and heavy duty; it weighs in at 16.8 pounds. I haven't pulled with it yet, but I believe it's exactly what I needed to pull the two trailers I need to pull (2" ball, and 2 5/16" ball).
# 8
Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Greaseless Balls - 4" Drop or Rise
Great fit and finish looking forward to the first tow with it.
Good hitch so far towing multiple days a week for work . Wish the aluminum balls didn’t oxidize up so quick , doesn’t keep it nice look for long .
# 9
Rapid Hitch Adjustable Aluminum Ball Mount Kit - 2 Zinc Balls - 4" Drop or Rise
What do i like about this hitch…i tow trailers requiring both size balls andmits easy to flip this around and adjust tow height. Its lightweight and easy to take on and off when needed. The built in locks keep the hitch on my truck. I like it and recommend it.
I purchased this to replace a Fastway Flash E Series Ball mount that I purchased and returned from another online seller that did not provide enough clearance from my rear bumper in the rise position. My vehicle really needed the extra 5/8ths of an inch of length on the shank of the Rapid Hitch. Clearance was not a problem in the drop position; but with a receiver that's 18-inches off the ground, I need to use the rise position more frequently than many. The other thing I noticed is that this ball mount is feels more substantial than the one from Fastway. In use, I prefer this to the Andersen EZ hitch I had been borrowing. It looks really cool. It has 5 adjustment positions rather than four and bit more adjustability in either direction. Plus, it still fits in easily in the storage area underneath the floor of my SUV. And did I say it looks really cool. I hated to put grease on the ball before I went to hook up the trailer. Also, I plan to get the lock set. It's looks great on my SUV and seems likely to disappear overnight and look great on someone else's vehicle.
# 10
Flash Simple 2-Ball Mount w Chrome Balls - 2" Hitch - 6" Drop, 7" Rise
Works great. With all the adjustments we can get our trailers to haul level now. Quality looks really good and it has the 2 size trailer hitch balls which makes it way more convenient.
VERY HAPPY, BUT STARTED TO SEE SOME RUST ON THE HITCH BALL AND ONLY USED TWO TIMES. THE VERSABILITY OF THE PRODUCT IS GREAT. OTHER THAN THE SMALL AMOUNT OF RUST ON THE BALL ITSELF, IM VERY SATISFY AND WILL BUY FOR MY OTHER TRUCKS.
# 11
Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
Picked up my teardrop in ABQ on 2/17/23, and the Curt ball mount lined up perfectly with no drop/rise, and the extra length gave clearance for my rear door mounted spare tire. This mount is a beast, and the "overbuilt" nature of it gave me confidence that my Bronco would tow the teardrop easily. I also got the Curt Echo wireless brake controller, which synced easily to my phone and was easy to install, set up, and use. Overall a great towing experience, thanks to etrailer and Curt!
Works great used for 3 different trailer we have handy it's heavy well made.
# 12
Convert-A-Ball Ball Mount for 2" Hitches - 6-3/4" Rise, 8" Drop - 10,000 lbs
I use this hitch when I pull my horse trailer to make the stop/start transitions as smooth as possible for the horses in the back. It works great. I also love that its a category IV hitch. Really heavy duty. My truck sits pretty high, and the amount of drop - 8" is perfect. I never worry about hitch failure travelling with my horses - they're a heavy load, and any failure would be a disaster. E Trailer provided excellent service, and their shipping to Canada was prompt and hassle free. Way to go guys, keep up the great work!
I have a 2012 GMC Sierra HD with a 12" suspension lift. I recently purchased a ball mount hitch with 8" inch drop for our 36' RV trailer and it worked great. It took 3 days for the hitch to get to me. Great service from e-trailer.
# 13
Convert-A-Ball Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 14,000 lbs
Product is awesome. Shipping container was destroyed when it arrived. Product was not hurt.
Was hoping this would help with shock reduction. It doesn't. Has to fit loosely into hitch to function so it slams side to side and front to back. Would not recommend. Very disappointed in this purchase. Trailers service is exceptional. Easy to order. Arrived quickly, well packed.
# 14
Curt Heavy Duty Forged Ball Mount with 2-5/16" Ball - 2" Drop - 15,000 lbs
I tried twice to get this hitch and ball from [online vendor]. Twice the shipment was lost and I had to get a refund. Shipment from etrailer is right the first time and arrived quickly. Plus, since the ball is already torqued on the ball mount, I don't need to by a large socket.
We’ve already installed it and hitched up the horse trailer. Works great for my needs. Half the weight of the much heavier weight distribution system we had been using (and will continue to use for Interstate travel). Hook up was fast and easy.
What our customers are saying:
"This site is top notch: Great prices, great service. Highly recommended."