# 1
24x60 Reese Cargo Carrier for 2" Hitches - Steel - 500 lbs
The rack is much bigger than my previous one. I was disappointed that it was made in China instead of the USA. It assembled very easily and the light kit works very well. The only draw back is I can no longer open my tailgate with the rack installed due to the spare tire hitting the raised rack.
This a very nice hitch rack. Well built, lots of space, long hitch tube works very well with Jeep Wrangler JL spare tire, however, you will not be able to open the swing tailgate with the rack on. Its not a big issue as it provides a good amount of clearance to the ground. If you use this carrier with one of the hitch rack cargo bags, it really adds to the cargo capacity of the rack. I have been very happy with this rack, I also like that you can add additional tail/brake lights to the rack.
# 2
19x60 Curt Cargo Carrier for 2" Hitches - Aluminum - Folding - 500 lbs
Purchased this 1 year ago. Worked awesome for a 9.000 mile cross country trip with three off road adventures at geology tour road Joshua tree, west side road Death Valley, and kingman wash lake mead. No rattle, always secure, great clearance. Would purchase again.
It works, but I only put two electric bikes on it. The mesh seems to bend pretty easy.
# 3
24x60 Curt Cargo Carrier for 2" Hitches - Steel - 500 lbs
We just installed our carrier. We love that this is going to free up a lot of space for our vacation traveling. Very heavy duty and bigger than i was thinking it would be.The pin that holds the carrier in the hitch was not included. It would have been an added bonus if it was.
This cargo carrier fits perfectly behind my 2023 CR-V. I use it for hauling bags of grass to the yard waste. It is almost a two person job inserting it into the receiver though. Seems well made and well finished.
# 4
17x46 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 500 lbs
I've been using this Cargo Carrier on my 4 Runner Venture for about a year now. I Purchased this item to haul extra gear to Nags Head from Northwestern Virginia. Installation was a breeze and it's very, very sturdy. I had two Yeti coolers packed with ice and drinks and there was no wobbling at all. I'm a 197 pounds and I was standing on it after I installed it just to check for durability and this thing is a beast. I also used this as a rod holder while on the beach and I caught a 6 foot black tip shark. Overall, I'm very pleased with this item and I would recommend to a friend.
This is a substantial, well-made product at exactly the size I needed - smaller than many, and with sides that keep items secure. It was very easy to assemble, with all parts included and clearly sorted, and with all pieces manufactured to cleanly align. The item arrived promptly, packed to protect the shipment but without waste. I highly recommend this for anyone looking for a high-quality cargo carrier.
# 5
20x59 Curt Cargo Carrier for 2" Hitches - Steel - Folding - 500 lbs
Great design and sturdy. I got two hitch pin stabilizers for hitch and folding pin and it worked awesome. I use it for storage for cab over camper and the carrier fits flush with open tailgate. Carries generator water fire wood and I use it as a step to get into the camper.
Bought for my 2020 XC 40. I’ve taking it on several long distance hauls and it’s frees up a lot of space inside the car. I love that you can open the trunk and get items while having the carrier on. The car handles very well with is on. However I would suggest you buy a hitch stabilizer to stop rattling it make the car a carrier act as one. It folds up when not in use so nothing sticking out when not in use.
# 6
Ultra-Fab Dirt Bike Carrier for 2" Hitches - With Ramp - 77" Long - 500 lbs
I can't say I'm entirely happy with my purchase. The instructions were more confusing than helpful. Note in "instruction.jpg" photo of STEP 1 that the text says to put the 8 small bolts in from the inside first, but the drawing clearly shows them as going in from the outside. The last step says to place the ramp onto the receiver as shown.... glad I didn't throw away the box because there is no drawing that shows ramp installation. Actually, the photo on the box was more helpful than any of the instructions. Also, I need to make a trip to the hardware store to buy longer medium bolts because the ones that came with the carrier were not long enough to fully engage the self locking feature of the nylon lock nuts. At a minimum a couple of threads should protrude beyond the nylon. See photo "nut.jpg". The bolt threads don't reach the end of the nylon, so the self locking feature is not fully engaged. I did tighten the nut, but that was as far as it would go. I think once I get back from the hardware store with the new medium bolts and after I reverse the 8 small bolts (I followed the drawing and not the text of the instructions), I'll be OK with the carrier.
"Instantly Get Rid of Wobble and Upgrade With Lights" This is not a 5 because ramp should be longer & there should be some type stabilizer to temporary hold bike while strapping down, I'd pay more for those upgrades. The wobble can instantly be solved by hooking Tie-Straps closest to vehicle directly to the receiver where you hook your chains, rather than hooking them to the provided holes on carrier itself. You of course use the provided strap holes ones on the opposite side. When strapped down as stated, the carrier now becomes one with the vehicle & @ 80mph there is no wobble. (*TIP: Put ramp back in its place before strapping down or else it won't fit with the strap hooks in the way.) I upgraded mine with lights for both safety reasons & not needing the Police any reason to pull me over. It was very simple and cost me nothing but time & maybe $50. I recommend this product whole heartedly.
# 7
20 x 59 Curt Cargo Carrier for 2" Hitches - Steel - 500 lbs
Great quality and serves its purpose. I wish I ordered the slightly bigger one to fit the bins and items I use it for. For example, a white standard igloo cooler doesn’t fit the way I need it to maximize loading capacity. I highly recommend a stabilizer to prevent wobble.
Very nice quality. Took one person and two wrench about 15 minutes to install the cargo carrier from box. It is very sturdy and the finish is very good. I really like the added height this specific carrier provides.
# 8
16x21 TorkLift Lock and Load SideKick Cargo Tray for 2" Hitches - 200 lbs
Just what I was looking for. Wanted to carry a small Honda generator and skinny gas can. I tilted the "Y" shaped security bar away from the vehicle by putting more washer between it and the carrier. That moved the generator enough to fit in the skinny gas can.
Very good quality for different types of generators. Again, I would’ve gave it five stars if it wasn’t for the price. But it is very well quality.
# 9
19x59 Curt Cargo Carrier for 2" Hitches - Steel - Folding - 500 lbs
Great cargo rack. Easy assembly! Will work excellent for transporting our Honda EU 3000 inverter
Extremely satisfied with the DrawTite front hitch and Curt Cargo carrier. Everything fit perfect and an easy install. Thanks.
# 10
32x48 Reese Solo Cargo Carrier for 2" Hitches - Steel - 400 lbs
I received the package in a pretty rough exterior condition but everything was fine inside. The previous comments about having to cut away the expanded metal flooring in order to install the carriage bolts wasn't true in my case. Apparently, this quality control issue has been addressed by the manufacturer. Assembly went well and wasn't complicated. A different carriage bolt with a longer square shoulder should be used. The shoulder doesn't grip too well to the square cutout in the frame and even while pressing firmly on the head of the bolt, it wanted to turn as I was tightening the nut. All in all, it seems to be a solid product and I look forward to using it.
I wish the load capacity was a bit higher, but overall I am satisfied with the cargo carrier. It is perfect for lugging my two dog crates behind my vehicle instead of inside the vehicle. Thank you for offering a dimensionally larger cargo carrier than most retailers.
Surco Hitch Cargo Carrier Review - 2013 Nissan Xterra
Today on our 2013 Nissan Xterra we'll be test fitting the 24x60 Cargo Carrier from Surco, part number 52018. To begin our test fit we'll slide the shank of the carrier into the receiver tube of the hitch. Line up the pin hole and install our pin and clip. Now we'll go over some key measurements.We have 18 inches of ground clearance. The closest point of the carrier to the rear of the vehicle is 5-1/2 inches. We've added 31 inches to the overall length of our Nissan Xterra.
Rola Dart Folding Hitch Cargo Carrier Review - 2013 Nissan Xterra
Today on our 2013 Nissan Xterra we'll be test fitting the 23x56 Rola Dart Cargo Carrier for 2 Inch Hitches, part number 59550. To begin our test fit we'll slide the shank of the carrier into the receiver tube of the hitch. Line up the pin hole and thread in our anti-rattle bolt tightening it with a wrench.Now we'll go over some key measurements. We have about 17-1/2 inches of ground clearance with the carrier in this position. The closest point of the carrier to the rear of our vehicle is about 4-1/2 inches. We've added 16 inches to the overall length of our Nissan Xterra.
Curt Folding Aluminum Cargo Carrier Review - 2013 Nissan Xterra
Today on our 2013 Nissan Xterra, we'll be test fitting the Curt 20 by 60 Folding Aluminum Cargo Carrier for 2 inch Hitches, Part Number C18100. To begin out test fit, we'll slide the shank of the carrier into the receiver to the hitch, line up the pin hole and install our pin and clip. Now, we'll go over some key measurements. We have 16 inches of ground clearance. The closest point of the carrier to the rear of our vehicle is about 3 inches and we've added 10 inches to the overall length of our Nissan Xterra. We'll pull the pin at the base of the carrier to allow out carrier to unfold.
Surco Hitch Cargo Carrier Review - 2012 Nissan Xterra
Today, on our 2012 Nissan Xterra, we'll be test fitting the Surco cargo carrier for two inch hitches, part number 52018. We'll begin our test fit by sliding the shank of the carrier into the receiver tube of the hitch, lining up the pin hole and installing our pin and clip. Now, we'll go over a few clearance measurements. We have about 17 inches of ground clearance. The closest point of the carrier to the rear of our Xterra is about five and a half inches. We've added about 31 inches to the overall length of our vehicle. The exhaust system on this vehicle exits on our passenger side and sits about 11 inches away from our loading platform. When opening our rear hatch, we see that the door breaks over the cargo carrier at about 16 inches.
Rola Dart Folding Hitch Cargo Carrier Review - 2012 Nissan Xterra
Today on our 2012 Nissan Xterra, well be test fitting the Rola Dart Cargo Carrier for 2 Hitches part number 59550. This carrier does fold so well be loading it in the folded position. Well slide the shank of the carrier into the receiver tube of the hitch. Line up the pin hole and install our anti-rattle bolt, tightening it with a wrench. Now, well go over a few clearance measurement. We have about 16 1/2 of ground clearance.
MaxxTow Aluminum Hitch Cargo Carrier Review - 2012 Nissan Xterra
Today, on our 2012 Nissan Xterra, we'll be test fitting the Maxxtow Cargo Carrier for 2-Inch Hitches, part number MT70108. We'll begin our test fit by sliding the cargo carrier shank into the receiver tube of the hitch, lining up the pin hole, and installing our pin and clip. Now, we'll go over a few clearance measurements. We have about 16-1/2 inches of ground clearance. The closest point of the carrier to the rear of our Xterra is about 8-1/2 inches. We've added about 31 inches to the overall length of our Nissan Xterra.
MaxxTow Hitch Cargo Carrier Review - 2012 Nissan Xterra
Today, on our 2012 Nissan Xterra, we'll be test fitting the Maxxtow Cargo Carrier for 2-Inch Hitches, part number MT70107. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and install our pin and clip. Now, we'll go over a few clearance measurements. We have about 16-1/2 inches of ground clearance. The closest point of the carrier to the rear of our Xterra is about 7 inches. We've added about 26 inches to the overall length of our Nissan Xterra. The exhaust system on this vehicle exits on the passenger's side and sits about 12 inches away from our loading platform.
Curt Folding Hitch Cargo Carrier Review - 2012 Nissan Xterra
Today, on our 2012 Nissan Xterra, we'll be test fitting the Curt Folding Cargo Carrier for 2-Inch Hitches, part number C18132. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and install our pin and clip. With the carrier in this position, we'll go over a few clearance measurements. We have about 16-1/2 inches of ground clearance. The closest point of the carrier to the rear of our Xterra is about 2-1/2 inches. We've added about 14-1/2 inches to the overall length of our Nissan. We'll pull the pin and clip at the base of the carrier to allow it to unfold.
Curt Folding Hitch Cargo Carrier Review - 2012 Nissan Xterra C18131
Today on our 2012 Nissan Xterra, we'll be test fitting the Curt Folding Cargo Carrier for 2-Inch Hitches, part number C18131. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and install our pin and clip. Now, we'll go over a few measurements with the carrier in this position. We have a ground clearance of about 16 inches. The closest point of the carrier to the rear of our Xterra is about 3 inches, and we've added about 14 inches to the overall length of our Xterra. We'll pull the pin and clip at the base of the carrier and allow it to unfold. With the carrier in this position, we have a ground clearance of about 23 inches.
Curt Folding Aluminum Cargo Carrier Review - 2012 Nissan Xterra
Today, on our 2012 Nissan Xterra, we'll be test fitting the Curt Folding Cargo Carrier for 2-Inch Hitches, part number C18100. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and install our pin and clip. With the carrier in this position, we'll go ahead and go over some clearance measurements. We have about 14-1/2 inches of ground clearance. The closest point of the carrier to the rear of our Xterra is about 3-1/2 inches. We've added about 10 inches to the overall length of our Nissan. We'll pull the pin and clip at the base of the carrier and allow it to unfold.
Curt Hitch Cargo Carrier Review - 2012 Nissan Xterra
Today on our 2012 Nissan Xterra, well be test fitting the Curt Cargo Carrier for 1-1/4 and 2 inch hitches, part number C18145. To begin our test fit, well slide the shank of our carrier into the receiver tube of our hitch. Line up the pin hole and install our anti-rattle bolt tightening it with a wrench. Now well go over a few clearance of measurements. We have a ground clearance of about 17 inches. The closest point of the carrier to the rear of our Xterra is about 6 inches.
Stromberg Carlson Hitch Cargo Carrier Review - 2001 Nissan Xterra
Today on our 2001 Nissan Xterra, we've got out the Stromberg Carlson Cargo Carrier here. It's been designed for use on 2-inch hitches and it's going to carry up to 500 pounds. Part number on it is CC-100. Now this carrier has a pretty nice open expanded steel, larger than you see on some of the carriers. It's going to allow for larger dirt and debris to fall down and out. Also offers a raised rail around the outside edge.
MaxxTow Hitch Cargo Carrier Review - 2001 Nissan Xterra
Today on our 2001 Nissan Xterra we've got out the Maxxtow Aluminum Cargo Carrier. We're going to test fit it and see what kind of spacing we have here with our vehicle. This is a aluminum slatted cargo carrier. We've got the big wide areas for dirt and debris to fall through and then our slats there to keep our load supported. It's got a small raised edge around the outside. It's going to be about 2 inches high. This is really compact as far as storage and things go like that.
Lets Go Aero Hitch Cargo Carrier Review - 2001 Nissan Xterra
Today on our 2001 Nissan Xterra we're test fitting the Let's Go Aero Gear Cage. Now this is a 32 by 48 cargo carrier. It's been designed for use on 2 inch hitches. It'll carry up to 300 pounds. The part number is HCR222. Now different than a lot of carriers, this one's gonna have a solid platform to it, or a solid floor.
Curt Hitch Cargo Carrier Review - 2001 Nissan Xterra
Today on our 2001 Nissan Xterra, we've got the Curt 20 by 60 folding cargo carrier and we're going to do a test fit on it. Now this cargo carrier has a nice kind of an expanded steel tight floor. It's got a medium hole size so you're going to get good support for smaller items but also room for dirt and debris to fall down and through. You can see the raised rail all the way around the outside it's about 5 1/2 inches tall. It's going to give us a good support for our gear that we've got loaded up and also you can see some good connection points for tie down straps. We've got a couple of reflectors on the sides and on the back.
Curt Hitch Cargo Carrier Review - 2001 Nissan Xterra C18150
Today on our 2001 Nissan Xterra, we're test fitting the Curt 20" by 60" cargo carrier. This cargo carrier's for use with up to 500 pounds and it's been designed for use also with 2 inch hitches. Part number on it is C18150. This carrier is going to have a medium sized expanded steel floor on it. Gives you room for dirt and debris to fall down and through but it's also going to keep your cargo plenty secure even if it's smaller items. We've got a raised rail that's going to go all the way around the outside edge. It's about 5 1/2 inches tall.
What our customers are saying:
"First Class merchandise. First Class people. Got my hitch and then my cargo carrier here. Best prices and shipping rates I could find online."