bing tracking image

Most Popular Hitch Bike Racks for Nissan Titan

change vehicle


Bike Rack Videos

Hollywood Racks Hitch Bike Racks Review - 2023 Nissan Titan

Hi everyone, Aiden here at etrailer. Today we're going to be taking a look at the Hollywood Racks Destination E-bike Rack, and seeing how it fits on the back of our 2023 Nissan Titan. This is going to be a platform style bike rack aimed at carrying e-bikes. It has a 70 pound weight capacity per bike, so, good at carrying some of the heavier e-bikes and it's going to work great with bikes that have alternative frames, fenders, things like that because of the way it holds onto the bike. Three wheel straps at the bottom, pull it down and in, and also, keep that front tire from pivoting, but then, the frame clamp up top can rotate around 360 degrees to adapt to those alternative frames. And because we're not relying on wheel hooks for contact, it's fender friendly.



Rola Hitch Bike Racks Review - 2017 Nissan Titan

Speaker 1: Today, on our 2017 Nissan Titan, we're going to be taking a look at our ROLA Convoy four bike platform rack. That's part number 59308-4. Now, one of the main features of this rack is that it's got a modular design, which basically just means that each platform can be removed individually. Right now, we've got it in the four platform state. If you wanted to, you could take it down to three or two, or even one, if you just had one bike that you wanted to haul.One thing that's important to note is that it's got a max capacity of 45 pounds per bike, so if you had four 45 pound bikes on this rack plus the weight of the rack itself, it's going to equal out to about 320 pounds. That's going to be a lot of weight if you're on your own.



Inno Hitch Bike Racks Review - 2017 Nissan Titan

Speaker 1: Today on our 2017 Nissan Titan, we're going to be taking a look at our Inno Aero Light 4 Bike Rack. It's going to be part #INH640.This is a very simple and user-friendly bike rack. It does feature an integrated cable lock. That's going to keep our bike secure if we're out and about. It also features three ratchet strap, so two on the top cross-bar and one on the down bar. This is on our anti-sway cradle.



Softride Dura Hitch Bike Rack Review - 2014 Nissan Titan

Today on our 2014 Nissan Titan, we're going to be test fitting the Softride Dura Parallelogram, a tilting 4-bike rack for inch-and-a-quarter and 2-inch hitches, part number Sr26247. To begin our test fit, we'll slide the shank of the bike rack into the receiver tube of our hitch, line up our pin holes, thread in our anti-rattle bolt, and tighten it down with a wrench. We can then secure it, using the provided lock. In this position, we'll have about 19 inches worth of ground clearance. The closest point of the rack to the back of our vehicle is about 6 inches away, and overall, we've added about 35-1/2 inches to the length of the truck. The Dura Parallelogram has removable arms that allow for more storage options.



Saris Freedom Hitch Bike Racks Review - 2014 Nissan Titan

Today on our 2014 Nissan Titan, we're going to be test fitting the Saris Freedom. A platform style four bike rack for two inch hitches. Part number SA4414B. To begin our test fit, we'll slide the shank of the bike rack into the receiver tube of our hitch, line up our pinholes, thread in our anti-rattle bolt and tighten it down with a wrench. We'll then secure it using the provided clip. In this position we'll have about 19 inches worth of ground clearance. The closest point of the rack to the back of our vehicle's about four and a quarter inches away.



Saris Axis 3 Bike Rack Review - 2014 Nissan Titan

Today on our 2014 Nissan Titan, we're going to be test fitting the Saris Axis, a tilting 3-bike rack for inch-and-a-quarter and 2-inch hitches, part number SA843B. To begin our test fit, we'll slide the shank of the bike rack into the receiver tube of our hitch, line up our pin holes, thread in our anti-rattle bolt, and tighten it down with a wrench. We'll then secure it using the provided lock. In this position, we'll have about 19-1/2 inches worth of ground clearance. The closest point of our rack to the back of our vehicle is about 6 inches away, and overall, we've added about 13-1/2 inches to the length of the truck. Pulling the yellow T-handle at the base of the center mast, will allow us to tilt it away from our vehicle.



Saris Axis Tilting 2 Bike Rack Review - 2014 Nissan Titan

Today on our 2014 Nissan Titan, we're going to be test fitting the Saris Axis, a tilting 2-bike rack for inch-and-a-quarter and 2-inch hitches, part number SA832. To begin our test fit, we'll slide the shank of the bike rack into the receiver tube of our hitch, line up our pin holes, thread in our anti-rattle bolt from the left to the right, and tighten it down with a wrench. We can then secure it with the provided clip. In this position, we'll have about 19-1/2 inches worth of ground clearance. The closest point of the rack to the back of our vehicle is about 6-1/4 inches away, and overall, we've added about 12 inches to the length of our Titan. Pulling the yellow T-handle at the base of the center mast, will allow us to tilt the rack away from our vehicle.



Thule Helium Aero Hitch Bike Rack Review - 2014 Nissan Titan

Today on our 2014 Nisan Titan, were going to be test fitting the Thule Helium Aero, a tilting two bike rack for 1-1/4 and 2 inch hitches, part number TH9042. To begin our test fit, well slide the shank of the bike rack into the receiver tube of our hitch. As we do this, well want to hold out on the attached pin. Well line up our pin holes. Allow the attached pin to fall into the pin hole. Well then turn the black knob.



SportRack 3 Bike Rack Review - 2014 Nissan Titan

Today on our 2014 Nissan Titan, we're going to be test fitting the Sportrack Tilting 3 Bike Rack for 1 1/14 and 2 inch hitches, part # SR2403. To begin our test fit, we'll slide the shank of the bike rack into the receiver tube of our hitch, line up our pinholes, thread in our anti-rattle bolt and tighten it down with a wrench. We can then secure it with the provided clip. In this position, we'll have about 19 1/4 inches worth of ground clearance. The closes point of the rack to the back of our vehicle is about 3 3/4 of an inch away, and overall we've added about 11 1/2 inches to the length of our truck. Pulling the black pin and clip at the base of the rack will allow us to tilt it away from our vehicle. As you can see, this allows us to fully open our tailgate. With our mast back in its upright position, we'll now pull the pin and the clip at the top of the rack.



Softride Hang2 Tilting Bike Rack Review - 2014 Nissan Titan

Speaker: Today on our 2014 Nissan Titan, we're going to be test-fitting the Softride Hang 2, a tilting two bike rack for 1 1/4" and 2" hitches, Part#SR27041. To begin our test fit we'll side the shank of the bike rack into the receiver tube of our hitch. Line up the pinholes. thread in our anti-rattle bolt and tighten it down with a wrench. In this position we have about 19 1/4" worth of ground clearance. The closest point of the rack to the back of our vehicle is about 4 1/2" away. And over-all we've added about 20 1/2" to the length of the Titan. Pulling the two pins at the top of the mass will allow us to swing our handle bar cradles up into position.



Softride Element Hitch Mounted Bike Rack Review - 2014 Nissan Titan

Today on our 2014 Nissan titan were going to be test fitting the Softride Element Parallelogram. A tilting 4 bike rack with 1 1/4 inch 2 inch 00:00:08 hitches part number SR26248. To begin our test fit, were going to side the shank of the bike rack into the receiver tube of our hitch, line up our pin holes, tread in our anti-rattle bolt and tighten it down with a wrench. In this position we have about 19 inches worth of ground clearance. Closest point of the rack to the back of our vehicles is about 4 inches away and overall weve added about 12 inches to the length of the truck.Pulling the silver pins at the top of the mast will allow us to swing out our cradle arms. Well rotate them into position and reinsert the pins into the new holes to secure them.



Saris Thelma 3 Bike Rack Review - 2014 Nissan Titan

Today on our 2014, Nissan Titan. We're going to be test fitting the Saris Thelma. A platform style 3-Bike rack for inch of a quarter and two inch hitches, part number SA4239B. To begin our test fit, we'll slide the shake of the bike rack into the receiver tube of our hitch. Lineup our pin holes, throw out in our anti rattle bolt and tighten it down with our wrench. We can then secure it using the provided clip. This position, we'll have about 19 in a quarter inch worth of ground clearance.



Hollywood Racks Traveler Tow n Go Bike Rack Review - 2014 Nissan Titan

Today on our 2014 Nissan Titan we're going to be test fitting the Hollywood Racks Traveler Tow-n-go 3 bike rack for 2 inch ball mounts, part number HR135. For today's test fit, we'll be using the Hidden Hitch ball mount with an extra long shank, part number 80232. We'll begin our test fit by sliding the shank of the ball mount into the receiver tube of our hitch, lining up our pin holes, sliding through a pin, and securing it with a clip. Now please keep in mind the ball mount, the pin and clip, and the hitch ball are all sold separately. As you can see, using the standard pin and clip does leave some play in our bike rack. If you'd like to secure it further, we do have anti-rattle devices. Just check our website for some more details. Now it's time to swing out our dual cradle arms.





Nissan Titan Bike Rack Questions