# 1
Channel Style Adjustable Ballmount - 2" & 2-5/16" Balls - 14,000 lbs
Still haven't towed anything with it yet but it seems very solid. I do think it will rattle some in the receiver because it is loose in my 2" receiver on my 2019 F150.
This hitch has worked out great for me over the last year. It’s very heavy duty and easy to adjust. I’ve hauled a 9,000 lb boat, long-distance on numerous occasions without issue. I also haul a landscape trailer on a daily basis weighing over 5,000lbs and haven’t had a single issue. Great hitch that was significantly cheaper than others and is very high quality. I’ve recommended it to several people and I wouldn’t hesitate to buy again. The only thing I would like to have now in a hitch is a tongue weight gauge, but it isn’t necessary.
# 2
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Excellent quality, fast shipping. Finding a metric ball for our international application was a bit difficult. We knew etrailer was the place to go for all things "trailer" related. Very happy with the purchase!
Strong and seems to be well made and well finished. One-inch ball mounting hole. I used this for a Curt hitch mounted on a 2014 Forester and pulls a small Harbor Freight trailer. Perfect height and trailer is level. Warning - don't get their hitch pin, it does not have a hole for a cotter pin, only a weak clip that I would not trust.
# 3
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Sara R was helpful helping me find the right hitch for what I described as needing. I was excited to see the hitch pin in my order details even though I didn't order it. Sadly, the picture gave me a false impression. Overall, excellent customer service and product.
Working in the sand and grass of my driveway my wife and I installed our new etrailer receiver hitch. Great fit and finish! Went right on as described in the online guide. Hitch required a spacer washer on top back bolt attachment point. Taped it on so it would not move while lifting in place and it stayed right there! Used a car jack to raise up and hold the hitch into the underside of the trunk tighten the bolts and reattached the tail pipe done. Now we can pull our Sunfish Sailboat any where the car will go.
# 4
Draw-Tite Ball Mount for 2-1/2" Hitches - 1-1/2" Rise, 3" Drop - 10" Long - 18K
Well the first one was lost in shipping so I had to buy something local but I will definitely be using this one instead. It is MUCH beefier then the 14K one I picked up locally.
I have a truck with a class 5 hitch. Using the 2" to 2 1/2" adapter had a lot of play in it and this ball mount removed that play. The truck and me won't bounce around so much. Thanks for the great deal and fast shipping. Will be shopping with you again. Thanks again.
# 5
Curt Adjustable 2-Ball Mount - 2-1/2" Hitch - 6" Drop, 5-1/4" Rise - 20K
The product was well described on the web site. The truck matching worked great and was easy to use. This hitch was very easy to order and the price was good. The delivery date was correct, it was easy to follow with the information provided. The hitch was as advertised, easy to install and easy to use. Great Job!
I have been completely satisfied with this product. Very durable, solid beyond my expectations. Whether towing 1/2 ton or 6 tons I have no concerns that the trailer and load aren't safe and secure. Would purchase again but won't need to as this hitch was built to last.
# 6
Reese Ball Mount - 3-1/2" Rise, 5" Drop - 10" Long - 18,000 lbs
I have a 2015 Ford F-250 with the factory 2.5" receiver hitch. This drop ball mount fits into the factory receiver well, contrary to the product warning. It is also extremely beefy, you will not be disappointed! Photo fitment proof!
Very Strong ball mount. My wive (its her truck), towed 7000# of horse, tack and trailer last saturday. I know this ball mount is overkill but it is easier than using a 2" with the receiver adapter. Also this way if we have to tow something real heavy we already have the ball mount for it.
# 7
Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
Picked up my teardrop in ABQ on 2/17/23, and the Curt ball mount lined up perfectly with no drop/rise, and the extra length gave clearance for my rear door mounted spare tire. This mount is a beast, and the "overbuilt" nature of it gave me confidence that my Bronco would tow the teardrop easily. I also got the Curt Echo wireless brake controller, which synced easily to my phone and was easy to install, set up, and use. Overall a great towing experience, thanks to etrailer and Curt!
Works great used for 3 different trailer we have handy it's heavy well made.
# 8
etrailer Ball Mount Kit for 2-1/2" Hitches - 1-1/2" Rise or 3" Drop - 18,000 lbs
I am a frequent etrailer customer, the variety and availability of quality components and excellent service is what keeps me coming back. When trailering I strive to be as safe as possible, which is why I chose this heavy duty ball mount to tow my 10,000# car hauler trailer. With this very robust piece, I can be assured that the connection between my truck and trailer is secure.
This was our company's first ETRAILER order. My original order was for a Blu Ox receiver reducer. The plan was to continue using our current 2" drawbars with the 2 1/2" receiver on the "new" (2008) truck. Upon installation it was very apparent that there was way to much side play for safe towing of heavy loads on gravel roads. ETRAILER customer service was contacted for assistance. Holly was extremely knowledgeable regarding the product line and also had "hands on" experience with trailer towing. She not only guided me to the best resolution to my issue; but, also expedited shipment of the replacement drawbar. She further emailed a return shipping label for the reducer that was easy to print, along with straight forward and easy to understand instructions for the return. The UPS driver even commented about the label being the correct size as opposed to many undersized labels that he has received. Our company will now use ETRAILER as our "go to" vendor for trailer repair and towing supplies. As for the drawbar, the construction is one piece forged steel with an I-beam design. The ball appears to be high quality. I have complete confidence that the drawbar and ball kit will perform as needed when we are towing equipment or logs on gravel and dirt roads; as well as, off-road.
# 9
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
It did the trick, although it is starting to rust.
I purchased the etrailer.com 2-3/4 " Rise or 4" Drop Ball Mount Kit, Curt Trailer Hitch Receiver and Twist-in 7-Pole RV-Style Trailer Connector for my 2011 Chevy Silverado. Quick Delivery! All the necessary parts arrived in perfect condition. Directions were spot on and the instructional videos were great.
# 10
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.
This is a huge difference maker for us. I can open the tailgate of our truck with the trailer still attached, and helps minimize any body damage if my backing up is not good.
# 11
Convert-A-Ball Ball Mount for 2-1/2" Hitches - 3/4" Rise, 2" Drop - 18,000 lbs
I was very pleased with etralier for filling my order promptly. I was not pleased with usps.When the hitch arrived the box had been damaged. It was empty. I contacted etrailer about the problem. They were very helpful and offered me a refund or replacement. I chose the replacement. It was shipped promptly in good shape.It was a pleasure doing business with etrailer. Jon
Partial order. What I got was damaged and incomplete. The rest of the brake parts will be a few more days now….. will definitely not recommend
# 12
etrailer Ball Mount Kit for 2-1/2" Hitches - 3-1/2" Rise or 5" Drop - 18,000 lbs
Thanks etrailer. .fast friendly. Looks good. Get job done.best deal to..like the part I can call talk to real person and take my order. .I will be back again. .have 2014 Ram 3500 dually nice fit looks strong.
Well made super strong ball and hitch. The carrying bag makes storing the unit in my camping trailer very convenient. Excellent value.
# 13
Convert-A-Ball Ball Mount for 2-1/2" Hitches - 3" Rise, 4" Drop - 18,000 lbs
I like the way it cushions front and back jarring on rough roads.
My third one of these, I feel they help take shock out of towing. Just bought a extra one instead of changing balls all the time.
# 14
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.
# 15
Convert-A-Ball Ball Mount for 2" Hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs
Works great. Needed the drop to tow a utility trailer at level.
As always etrailer has the best products, best information and customer service, plus fast shipping! Thank you again!
# 16
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Longer stinger let me drop the tailgate on my Tacoma with trailer attached. Replaced a similar but shorter Curt hitch and both are very substantial and well made for the weight of my trailer.
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
What our customers are saying:
"Quick processing, and delivery. reasonably priced very satisfied"