Most Popular Spring-Loaded Loop for 2022 Toyota Tundra

Hitch seems to be working properly. The instructions were a bit hrs to follow, but with the use of a hammer and a little know how everything fit. I have a plastic bedliner, so instead of guessing where to drill the 4" hole, I just removed the liner to drill hole, then replaced it before installing the hitch. 2012 Toyota Tundra Double Cab 6.5 ft. Box.

Fits perfectly in our 07 tundra. Watched the instruction video, which took any frustrations out of the installation. Works exactly like it should. Thanks for a great product.

I have a 2005 Toyota tundra and I pull a gooseneck trailer with that BMW hitch best BMW hitch ever

Wow! Ordered on Thursday, delivered on Monday, installed on Tuesday. Our truck is all ready for our new gooseneck horse trailer. Thanks for the speedy delivery, Steve K

I purchased this to pull a 25Ton GN trailer with heavy equipment and so far it works great! Good price point and reliable product. I would highly recommend this product and trailer. Thank you!

One year later and it’s probably the best thing I could have added to my truck. Haven’t stopped hauling since I installed the turnover hitch

It's been great. Not a single hitch, no pun intended. I was able to figure out ways to install this thing by myself even on the parts where the instructions said to have 2 people. Been towing with this thing all year, 24 foot tilt deck gooseneck, no problem. 100% recommend.

Haven't installed yet,but seems very heavy duty.

The B&W hitches are the best in the business. I have had 6 of them now from a 92 Dodge, an 07 Dmax, a 2012 HD2500, a 15 Dodge, a 19 HD2500 and a 21 Dmax and now this latest one in an 06 HD2500. I HAVE HAF ZERO ISSUES WITH ALLBOF THESE HITCHES. ZERO!!!!!!!!!. READ the directions and FOLLOW the directions and you will be very satisfied with the results.

After having this hitch for a year I can’t say I’m too impressed. They claim the powdercoat on it is durable, but after only a year there’s already spots of rust. The pictures I’ve included are only showing a few spots I’ve noticed. I painted the pieces that sit against my frame with frame paint in hopes that doesn’t rust either. But the outside facing pieces, I haven’t touched. My truck is stored in the winter and the hitch hasn’t even been used yet since purchase. I’m sure it performs well since my last gooseneck hitch was B&W. But as for durability, I don’t think they do as well anymore. It shouldn’t be this rusty only after a year, being stored, not seeing salt or even being used.

Easy install. Just what I needed to prep our truck for our fifth wheel. Installation videos are very helpful. Thanks etrailer!!

Loved how eazy product installed instructions on hitch was great. Found on etrailer.com a video of how to install hitch. U will have to remove heat shild and exuast pipe to make much easier to in stall. The trailer ball is sweet u just flip up latch and turn then it's free to remove. Ordered hitch on Saturday free shipping and they called me to make sure it was shipping to right location. Then they emailed me when it shiped. It arrived on Tuesday on the same week. The price was great to. Will use hitch to pull 25 ft hay trailer and 24 foot stock trailer.

The Hitch came faster than expected It took about 2 hours to install thanks to etrailer's [on-line video]instructions very happy

Install went well. Was shipped the wrong plates with the nuts in them but customer service reacted quickly and got me what the ones I needed.

Great hitch. Used it several times to haul my cattle trailer no issues. Very easy to install with minimal tools. Everything fit well. I have a rubber bed mat and the rubber hitch cover is almost the exact same thickness making the bed %100 usable when the hitch is in storage. It also does a great job of keeping dirt out of the hitch.

Unit installed and pulled my fifth wheel to provincetowne Mass. Unhooked and pulled the ball out and picked up some firewood. Nice flat surface. Love it. Only way to go.

The kit arrived in two days. The quality is very good. All the parts fit as described. We were able to install it in a few hours without a lift. We plan on pulling a 14,000 # trailer to move farm equipment. This trailer will replace an old 12,000# pintle hitch trailer. I would definitely recommend this kit to others.

I like the hitch but when ai am pulling my trailers, and I am moving them around at low speeds it seems that there is a good amount of movement in the hitch and the feel in the truck. I’m not sure what that is but I have used trucks that didn’t have that feel in them but mine definitely does. We followed all directions and torqued all bolts to the required amount. Maybe someone can shed some light on what that maybe. Thanks

Awesome hitch. I will say some of the bolts are extremely hard to get to. Watch as many videos as you can. Most of the video have the trucks on a lift. Be sure and slowly graduate bit size on safety chain holes. I burned up a $23 bit on the first hole. Got it installed. Works great!

Extremely happy with the hitch. Shipping was fast, great product.

I love my hitch . I love how I can turn it over and I can still have use of the full truck bed. I could of bought a cheaper hitch but the quality is by far better than other hitches I have owned in the past. Customer service was great after they helped me fix my ordering mistake. Very happy with my hitch.

I was very satisfied from ordering to instillation. Great people and very concerned about your satisfaction. Instructions were complete and easy to follow. Saved approximately 50% in cost. Thanks etrailer

The hitch is beefy and seem to be very strong. My guess is the truck frame will give before the hitch. Great quality. I very happy! I'm an above average backyard mechanic and found the installation doable, but a little of a challenge. Differently need a help. My wife was a big help. I use a 2X4 across my bed and a ratchet strap to lift and hold the center section in to position. I also had to reposition my exhaust pipe where it goes over the differential to get some clearance. Also, I had to drill out one of the square holes in the tailpipe L bracket to receive the factory bolt.

Seems to be as described. I haven’t yet used it to tow anything, but the instructions were accurate. Installed on my 2003 f-350. It did take quite a bit longer than I thought. Started around 1pm and got wrapped up around 6. At first it didn’t look like things were lining up right, but everything moved into place as I snugged bolts down and torqued as the sequence in the instructions say. I love how it sits flush and is so user friendly once installed. I have used the same type of hitch on a truck at the fire station, so I’m familiar with how they work and they have always been great for me and others. I just dropped a star for how long the install took compared to their estimate. I’m not new to turning wrenches either, but it didn’t look like things were lining up at first.

I was converting a fixed/welded gooseneck ball on a CM flatbed to a removable one so I could also use a B&W Companion Flatbed Gooseneck to 5th Wheel Trailer Hitch adapter. Although it wasn’t easy to find someone to cutout the old ball and install the new turnover ball, it was done expertly and the hitch works perfectly! Very easy to operate from the wheel well and turn over for a flat area for cargo. Always had a turnover ball in the past and highly recommend this one for a conversion.

This unit was very handy to be able to purchase and install on my Bradford Built flatbed so that I could install my B&W companion hitch with flatbed base on the truck. The welding was all fairly straight forward and didn't require much except for a few washers and a piece of flat steel for a spacer. The one down side is that the hitch pin/handle does not have any built in twist-n-lock method to lock it so the pin remains disengaged for the ball or companion assembly install like on the common B&W under truck bed assemblies I've had on several trucks. We ended up installing the pin slightly out of line so that the tip of the pin would catch on the exterior of the receiver when pulled out and then when I wanted to engage the pin just push up on the handle and press the pin back in. I do like that I can still cover the hitch hole with the cover plate as seen in the picture.

This was not to difficult to install. The most nerve racking part was cutting a hole in the bed of my truck. So far the finish is holding up to the weather and none of the bolts have come loose. Now, I just need to get a Gen Y or Reese Goosebox for my 5th wheel to eliminate the giant hitch in the back of my truck!

About a year ago i purchased this and i honestly have not put it to use. However, i did get an email from the company asking me about my experience and it was just a nice thing to see. So, my experience installing it went very well. Online directions from the company made it a breeze without any questions. I think the whole process took 2 hour with my dads help. The hardest part for me was cutting the heat sheild off the exhaust because i didnt have the right tools.

Ordered this after deciding to go with it over a B&W kit due to me not using it a whole lot and the price difference. When I received the package 1/2 the hardware was missing because the inner box it was in was all broke apart and the outer box was not sealed up. So I would have to give the packaging and shipping one star because I had to go spend an extra $75 on grade 8 hardware. The paper directions were not totally clear on several thing so we resorted to the video which helped a lot. The two large carriage bolts that go in the rear cross member are a little deceiving because the video makes it seem like they slip right in. However, the heads were larger than the pass through in the frame rails so it took quite a bit of extra time and ingenuity to get those fished through there with the plates.(The carriage bolts survived shipping so they were what came with the kit). In the video it showed where he cut a large u out of the inner fender to clear the pull handle and notched the bed that looked kind of sloppy. With a few extra measurements you can just cut a hole in both for handle to slide through and give it a much cleaner look. Definitely recommend putting a bolt through receiver holes and using a strap to hold up center plate through hole in bed after you get it into place. Makes life a lot easier until you get the bolt ls in. Overall this hitch works and functions great. Install went pretty smooth with two people and I would recommend it to anyone needing a hitch.

Great product w great instructions. It was an affordable package that installed decently. We have used the hitch for a year now and have had zero issues w it. The only reason for not giving it 5 stars was because the cross bars that go between the frame rails needed to have the threaded holes chased w a tap to remove the powder coating prior to installation. I initially tried installing it without chasing the threads and the bolts started to get very tight before the parts even pulled together. Once the threads were clean, everything assembled very well. The hitch takes time to install, at least if you want it to look good and be correct. On a 1500 ram, you will probably need to install some form of helper spring or air bags to prevent the rear from squatting from the weight of the gooseneck trailer…the factory 1500 coil springs are not firm enough on their own.

etrailer did great with the shipping, and the quality of fabrication of the hitch is great, however the coating is no good. B&W should start having their parts galvanized. Powder coating does not hold up to this application. Especially when you coat smooth bare steel surfaces. I installed my last B&W hitch and same situation good fabrication poor coating. 10 years later it is the only rusty part of my frame. Other than that great product.

Did the install myself following your video. The turn over ball works great and easy to flip even in frigid temps after being exposed to elements.

Not a bad install at all. Pretty straight forward.

This was my first order I placed with et etrailer. If one work could say it I guess it would perfect! I ordered on a Tuesday arrived on Thursday. I Placed the order got conformation and a name and contact to call if I had any issues, once it arrived I got another email letting me know if had been delivered. The installation video was perfect made it’s easy to install just followed the steps. When I need any trailer related items I will use them. As far as the B&W hitch i put it in a 2017 Ram 2500 with Ram boxes. The fit and quality of the hitch and design is what I have come to expect from B&W. I got this hitch to pull a gooseneck horse trailer. If your wondering if it will work with Ram Boxes it will.

Easy enough to install. Directions are clear and the video online helped a lot. The little ring on top I made to give it a more finished look around the cutout. It would be nice if B & W included a piece like this with the kit, even if made of plastic. But, very happy with it.

We use a lot with a dump trailer and a horse trailer. No issues, smooth!

Installed on a 1995 powerstroke, slight modification required to make my air bags sit correct, but only to the air bag brackets not the hitch. I pull a 32’ stock trailer and exceeded the hitch manufactures weight rating on a weekly basis. Self installed and It has been on for about a year with no trouble. This seems to be just as strong as the B&W on my other pickup that I’ve had for more than 10 years.

Years later this is still the best damn purchase I have ever made try it and true tough as can be I'm a woman now 60 I put it in a few years back I did it by myself I was able to do it and I'm not manly...lol easy for me to hook my camper on to and get my camper off of and I love the safety features

B&W hitch arrived and installing was a breeze. The ONLY problem I encountered was the lock washers included seemed inferior and better than half of them spread apart and I replaced them with known good. All in all good quality and etrailer was very good to deal with. I'll still give my whole experience 5 stars....maybe they just got a bad batch of lock washers.

Easy to install with minimal modifications to the truck. This hitch has held up well towing a 44 ft trailer loaded to the max. Great product.