Most Popular CURT for 2022 Toyota Tundra

Hitch seems to be working properly. The instructions were a bit hrs to follow, but with the use of a hammer and a little know how everything fit. I have a plastic bedliner, so instead of guessing where to drill the 4" hole, I just removed the liner to drill hole, then replaced it before installing the hitch. 2012 Toyota Tundra Double Cab 6.5 ft. Box.

Fits perfectly in our 07 tundra. Watched the instruction video, which took any frustrations out of the installation. Works exactly like it should. Thanks for a great product.

I received it just as I pulled the fifth wheel hitch off. UPS put it on my tall gate I opened it up and installed it in less than 2 minutes. Prefect fit tight no slop. I give this company a 5 AAAAA +++++ rating. Fast shipping. Thanks Bill at etrailer Happy Trails

I have been through a lot in my life time but after talking with Kelly an I placed the order I could not be more pleased with the hitch! It was a perfect fit and can’t thank you enough!!!

One of the best products I have bought. If yours on a budget this plate is the best way to go. Plus you don't destroy your bed and using the rail system you can switch or not have anything and still use your entire bed of your truck.

Easy install. Just what I needed to prep our truck for our fifth wheel. Installation videos are very helpful. Thanks etrailer!!

Loved how eazy product installed instructions on hitch was great. Found on etrailer.com a video of how to install hitch. U will have to remove heat shild and exuast pipe to make much easier to in stall. The trailer ball is sweet u just flip up latch and turn then it's free to remove. Ordered hitch on Saturday free shipping and they called me to make sure it was shipping to right location. Then they emailed me when it shiped. It arrived on Tuesday on the same week. The price was great to. Will use hitch to pull 25 ft hay trailer and 24 foot stock trailer.

Great hitch. Used it several times to haul my cattle trailer no issues. Very easy to install with minimal tools. Everything fit well. I have a rubber bed mat and the rubber hitch cover is almost the exact same thickness making the bed %100 usable when the hitch is in storage. It also does a great job of keeping dirt out of the hitch.

Unit installed and pulled my fifth wheel to provincetowne Mass. Unhooked and pulled the ball out and picked up some firewood. Nice flat surface. Love it. Only way to go.

The kit arrived in two days. The quality is very good. All the parts fit as described. We were able to install it in a few hours without a lift. We plan on pulling a 14,000 # trailer to move farm equipment. This trailer will replace an old 12,000# pintle hitch trailer. I would definitely recommend this kit to others.

I like the hitch but when ai am pulling my trailers, and I am moving them around at low speeds it seems that there is a good amount of movement in the hitch and the feel in the truck. I’m not sure what that is but I have used trucks that didn’t have that feel in them but mine definitely does. We followed all directions and torqued all bolts to the required amount. Maybe someone can shed some light on what that maybe. Thanks

Ordered this after deciding to go with it over a B&W kit due to me not using it a whole lot and the price difference. When I received the package 1/2 the hardware was missing because the inner box it was in was all broke apart and the outer box was not sealed up. So I would have to give the packaging and shipping one star because I had to go spend an extra $75 on grade 8 hardware. The paper directions were not totally clear on several thing so we resorted to the video which helped a lot. The two large carriage bolts that go in the rear cross member are a little deceiving because the video makes it seem like they slip right in. However, the heads were larger than the pass through in the frame rails so it took quite a bit of extra time and ingenuity to get those fished through there with the plates.(The carriage bolts survived shipping so they were what came with the kit). In the video it showed where he cut a large u out of the inner fender to clear the pull handle and notched the bed that looked kind of sloppy. With a few extra measurements you can just cut a hole in both for handle to slide through and give it a much cleaner look. Definitely recommend putting a bolt through receiver holes and using a strap to hold up center plate through hole in bed after you get it into place. Makes life a lot easier until you get the bolt ls in. Overall this hitch works and functions great. Install went pretty smooth with two people and I would recommend it to anyone needing a hitch.

Great product w great instructions. It was an affordable package that installed decently. We have used the hitch for a year now and have had zero issues w it. The only reason for not giving it 5 stars was because the cross bars that go between the frame rails needed to have the threaded holes chased w a tap to remove the powder coating prior to installation. I initially tried installing it without chasing the threads and the bolts started to get very tight before the parts even pulled together. Once the threads were clean, everything assembled very well. The hitch takes time to install, at least if you want it to look good and be correct. On a 1500 ram, you will probably need to install some form of helper spring or air bags to prevent the rear from squatting from the weight of the gooseneck trailer…the factory 1500 coil springs are not firm enough on their own.

Installed on a 1995 powerstroke, slight modification required to make my air bags sit correct, but only to the air bag brackets not the hitch. I pull a 32’ stock trailer and exceeded the hitch manufactures weight rating on a weekly basis. Self installed and It has been on for about a year with no trouble. This seems to be just as strong as the B&W on my other pickup that I’ve had for more than 10 years.

Years later this is still the best damn purchase I have ever made try it and true tough as can be I'm a woman now 60 I put it in a few years back I did it by myself I was able to do it and I'm not manly...lol easy for me to hook my camper on to and get my camper off of and I love the safety features

Nice clean look. Most importantly didn't have to lower exhaust. centering the hitch in the bed was easy because of the template provided. Although install did take longer than what was noted, it was fairly simple. Would definitely purchase again.

I have had a few different GN hitches over the years and this model is top notch. The installation was straight forward and the drill guide made the location of where to drill effortless. If I had to pick a place where improvement could occur, it would be the resistance of the safety chain loop springs. They ensure rattles don't occur, but getting the chain loop inside can be difficult at times. Overall the construction is very robust. The nice touches such as the rubber cap and the price point make this a great option. I would repeat the purchase.

The ball did not last long. The trigger for allowing the ball to release takes away from the surface area of the ball. This lead to early wear and premature failure. I have to replace it with a B&W machined ball which is a harder steal and solid surface.

Used the Kurt gooseneck kit,worked great.Easy to install and great caae to put it back in when not in use.

Overall good product. I added 2 pieces of 2x2 (¼" thick) angle iron to the back of the base plate to stiffen up the plate more. I've used it on a 3500 dually pulling fully loaded dumpster trailers with no issues at all.

Great service, fast delivery.

Hello the gooseneck in bed hitch has been a great addition to my truck pullong a 40 ft long trailer fully loaded thanks for the great hitch

this installed correctly on my 2005 dodge ram 2500 diesel per instructions for installation with air bags. I have hauled a 42 foot 3 axle car trailer for over 6,000 miles with no issues. This was a great purchase. Thank you

I’ve had this hitch for about a year, and it’s great! It does exactly as it should. The only complaint is the red grip on the pull handle was basically sun faded and rotted after about 2 months.

Installed easily on 2015 GMC 2500 HD double cab short bed. Plenty of clearance under the bed when ball is flipped. This system makes for a clean useable bed. When I was purchasing this I was concerned about clearance of a gooseneck hitch and my transfer tank. I have a 40 gal tank that sits back from the cab a bit over 20 inches, there’s plenty of clearance for a gooseneck with a fuel tank on this short bed. The hitch has held up perfectly over the last year. I haul around 12k on steep, washboard, gravel roads.