Most Popular Not Shock Absorbing for 2021 Chevrolet Silverado 3500

Love this hitch. It has performed great with my 17,000 lb trailer all year. A very stable and reliable platform for towing. Easy to set up and plenty of adjustment to get the trailer just right. The only negative is the weight, not the easiest to get in and out of the truck by yourself.

This is a very good High Quality Hitch. Very Happy with it. The best thing about it is no rails in bed.

Product arrived fast, had it installed and towing within 30 minutes, set screw jam nuts on height adjustment slightly hard to get to but happy with the quality. Towing my 5th wheel around to test I noticed it felt much tighter with less chucking and bouncing than my last rail style hitch.

Great service helping with my 5th wheel trailer hitch problem

Really impressed with the quality of the Curt product. Worked out great, fitting my new to me 98 Dodge 3500. Thanks etrailer.

The Curt Gooseneck rail adapter works great for towing my 38ft Mobile Suite 5th wheel. And i can remove it and no rails to deal with. I would recommend this product. Two Thumbs up!!!

This adapter allowed me to quickly install a fifth wheel hitch in my single wheel shortbed truck which had a gooseneck hitch without any extra installation work, other than just dropping it in. Easily installed and has worked well with a slider hitch.

Excellent product

don't like it at all,,, turns on my flat bed with a trailer hooked up,, called company and they suggested to tighten it down tighter, and tried, it still turned. trying to find something different.

Used the Companion hitch to convert gooseneck ball mount to 5th wheel hitch. Companion fits perfectly inside the well of my flatbed and is easy to remove to use the gooseneck ball and easy to re-install. The hitch is very secure and tows my RV quite smoothly. There is no back and forth movement and I couldn’t be happier with it. Easy to hook up and disconnect the trailer. Highly recommended. Etrailer staff was very helpful in helping me find the right equipment to meet my needs.

Hitch is great, B&W products are exceptional. Had the turnover ball mounted on a Douglass flatbed. Purchased the fifth wheel hitch for a 37 ft two axle toy hauler. Pulls great, easy installation. Make sure to make all the appropriate measurements before purchasing. There were some shipping issues. etrailer failed to send a bolt bag initially. Took a while to get that rectified, but all is well.

Had to use chain and a cheater pipe to seat this in the gooseneck, but it’s better than being loose. Mounted a Curt A20 on it and it pulls a Keystone Montana like a dream

Fast delivery like I love!!! This is my 2nd unit I've ordered and very pleased with them. I have 2 car haulers that had the gooseneck set up. Bought this so I can pull with my semi! Excellent choice. More to be ordered for my trailers and I'm definitely ordering from you guys!! Thanks

Quality steel, heavy duty. Good product. It does have some rough/sharp edges though.

Shipping was fast. Experience with e trailer was good as always. Part was not so impressive. Plate where welded onto tube was not in line with the holes causing the hitch to not align with the trailer. Other than alignment hitch adapter looks and feels sturdy and robust.

Does not work. Makes front of flatbed trailer too high & ramps won’t land. And I had it blasted and painted before installing. Wish the weld was flat on 5th wheel plate.

This is a great product and would recommend it for anyone who doesn’t want to purchase a 5th wheel hitch

Order confirmation was fast, shipping was fast, they said it would be here Saturday but ups doesn’t deliver on Saturday or Sunday so it didn’t get here until Monday. I knew this so I was expecting it and I didn’t need it right away so to me it didn’t matter. Everything was delivered in good shape when it got here. I’ve bought one of these from strainer before and liked it so when I found I was in need of a goose neck adapter again I got the same one and etrailer came through again. This adapter is expensive but it works great. Would recommend.

Installed this hitch adapter on a small-ish fifth wheel trailer (2007 arctic fox 21-5R). I've waited to review now that I've finished pulling the trailer through the Canadian Rocky mountains to Vancouver island and back ~4000km or 2500 Miles. The hitch installed fairly easily in about 2 hours, with careful attention to centering and torque specifications. The hitch performed as it should throughout my recent trip, no problems with function whatsoever. The only downside I see with this hitch adapter is the need to raise the trailer a few inches higher each time you hitch/unhitch, in order to clear the gooseneck ball. Also, when nearing a full 90 degree angle between truck & trailer, the pin box may rub against the bed rails. This is partly due to the ride height of my truck. Otherwise, excellent solution for avoiding the Fifth wheel hitch in your truck box! Picture attached, dodge 3500 regular 6 foot box (levelling kit, 35" wheels) with arctic fox fifth wheel trailer. No modifications to trailer other than the ranch hitch adapter with offset for short box truck.

I have a 2019 f250 with the 6.5' bed and didn't want a heavy, bulky fifth wheel hitch taking all the bed space up. I had the fifth wheel package already installed as well, so it didn't make sense to not use that. I about went with the ultimate hitch that Anderson offers but decided against that as I have seen many reviews where the hitch failed. I saved a bunch of cash going with this product and it is awesome. I installed it by myself in my drive way in about 2 hours start to finish. I have zero issues turning so close to a 90*. I have a headache rack on my truck and it gets within an inch or two of hitting that but not my truck. I don't have any issues with the king box hitting the bed either like some people stated. The test ride today went very well. It rode very smooth and I have plenty of bed space for my dogs and gear. I would highly suggest this product if you are on the fence like I was. I will see how this will hold up over the years but I doubt I will have any issues. The shipping effected the sheath covering over the cable, I contacted the company, sent some pictures and they will be sending me a brand new part. I love this company and the products they stand behind!!!

Well worth the money. No paint which was fine. I did have to drill holes larger for my application. Far better than having to jack up and down my gooseneck all the time.

Everything is working fine. Product fit great and pulling like a champ. Great packaging job too.

You can not beat etrailer by any means!! Ordered at 5:04 and at 5:08 the order was filled and I received it the second morning. Good product, fast shipping, and good prices!!

Very good quality. Welds and fit are excellent. I used this to adapt a 5thwheel. The factory pin box was the wrong style to fit my truck and hitch. This coupler adapter allowed me to use vertical adjustment to let my trailer clear the bed of my truck even when turning. As you can see I cut the coupler down to suit my needs and it seems to have worked very well. My only complaint isn’t even really aimed at the part or etrailer but at usps. etrailer shipped the part the next day and I had it within 3days. The box it came in was shredded!!! Again not really the fault of etrailer or the part but y’all might think about using better shipping containers or using a better shipping company. Also wrapping these bigger heavier parts with sharp corners in shipping Cellophane might help keep the boxes in 1 piece. Thanks!!

Quality control kinda sucks with this one. I'm not happy with the crooked set screws primarily. Also not happy with the crooked load bearing pin holes that so many others mentioned. I bought this combo because it was only $[XX] more than the inner shaft by itself. Tried to get a partial refund or send it back but they want me to pay for shipping, so it's not worth it. I would recommend buying the Bulldog brand, might have better quality design.

Best customer service experience parts came in faster than expected and well packaged had placed the wrong order the first time and emailed the customer service to cancel order on a sunday replied right away and got me set up with the correct parts definitely my go to place from now on as a first generation farmer and having to deal with many trailers either to move cattle or equipment this is a place of business i can now trust thank you customer service department

The 5th wheel trailer coupler adapter works very well. It's strong, solid, and we'll made. Highly recommend!

Comes as Raw metal. Buy a couple cans of primer and paint. Welds on this are very nice and heavy duty. Shipping was very fast ordered Friday and was here Monday afternoon.

This may be a compatibility issue between manufacturers, but why is the front of the hitch pin plate not centered with the trailer center

It worked just fine. but it rusted being out in the weather attached to the trailer. I'm going to clean it and paint it hopefully to make it last. I do like it and it made it easy to back the truck up to the trailer.

Hard to hook up you have to be right over the hitch hole with the trailer pin or it wont drop in

Simple to use, great value!

I bought a used trailer and wanted to replace the gooseneck coupler and redesign the frame connection. I had a number of goals in this replacement. 1) Extend radius of the frame neck. Was 73in increased to 90in. 2) Move frame connection to a lower area of tube. 3) Increase surface area frame contacts tube and add collars to tube for increased surface area for cross tube pin. 4) Convert from gooseneck to fifth wheel style connection but allow revert back if wanted. 5. Add cover over top of tube to shed water from entering tube sections. (4in PVC pipe cap with a little dremel work fits great) 6. Replace safety chains with weld on chain mounts to frame. Allow chain replacement without welding chain to frame. 7. Provide covered area for safety chains and wiring to avoid weather. After much welding and fitting the new tube and post insert are finished and painted. I am very pleased with the quality of the items from etrailer and will be placing more orders in the future for trailer parts.

Perfect for the job if you’re switching from the regular gooseneck hookup to a semi truck fifth wheel set up. Shipping was accurate & I love my adapter! Very easy to attach & real neat finish to paint it whatever color you would like to.

Excellent quality very well made fast delivery Would buy again

I am well pleased with the quality of this product. I used it when modifying my gooseneck to a fifth wheel.

Great price and fast shipping

Added a gooseneck 5th wheel to a 14,000# dumpster trailer using boxed 8x8 wfb. Built it to the truck. This product ideal for this project. Welded on with flat plate allowing space for adjustment. Towing made a huge difference with the trailer maxed out most of the time. Turning around is fantastic with the ability to jack it around up to the cab.